• Journal of the Korean Mathematical Society
• /
• v.39 no.1
• /
• pp.31-49
• /
• 2002

An R$^{n}$ -geometry (P$^{n}$ , L) is a generalization of the Euclidean geometry on R$^{n}$ (see Def. 1.1). We can consider some topologies (see Def. 2.2) on the line set L such that the join operation V : P$^{n}$ $\times$ P$^{n}$ \ $\Delta$ longrightarrow L is continuous. It is a notable fact that in the case n = 2 the introduced topologies on L are same and the join operation V : P$^2$ $\times$ P$^2$ \ $\Delta$ longrightarrow L is continuous and open [10, 11]. It is a fundamental topological property of plane geometry, but in the cases n $\geq$ 3, it is no longer true. There are counter examples [2]. Hence, it is a fundamental problem to find suitable topologies on the line set L in an R$^{n}$ -geometry (P$^{n}$ , L) such that these topologies are compatible with the incidence structure of (P$^{n}$ , L). Therefore, we need to study the topologies of the line set L in an R$^{n}$ -geometry (P$^{n}$ , L). In this paper, the relations of such topologies on the line set L are studied.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.363-370
• /
• 2003

This paper describes a rectification procedure that relies on a polynomial model derived from the imaging geometry without loss of accuracy. By using polynomial model, one can effectively eliminate the iterative process to find an image pixel corresponding to each output grid point. With the imaging geometry and ephemeris data, a geo-location polynomial can be constructed from grid points that are produced by solving three equations simultaneously. And, in order to correct the local distortions induced by the geometry and terrain height, a distortion model has been incorporated in the procedure, which is a function of incidence angle and height at each pixel position. With this function, it is straightforward to calculate the pixel displacement due to distortions and then pixels are assigned to the output grid by re-sampling the displaced pixels. Most of the necessary information for the construction of polynomial model is available in the leader file and some can be derived from others. For validation, sample images of ERS-l PRI and Radarsat-l SGF have been processed by the proposed method and evaluated against ground truth acquired from 1:25,000 topography maps.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.335-344
• /
• 2012

Osteoporosis is increasing in Korea as it becomes an aging society with the rapid economic growth and the development of medical technology. Osteoporosis also develops due to chemo and radiation therapy of cancer which also increases owing to Westernized diet. Osteoporosis is caused by reduced bone density, has close relationship with the change of geometry of proximal femur, which is a factor of hip fracture risk. The purpose of this study was the analysis of the correlations of osteoporosis and the change of geometry of proximal femur, which was observed according to T-score variance. The 350 male and female patients are chosen from D hospital in Busan, who were classified by age, sex and T-score values (normal, osteopenia, and osteo porosis). The results show that the age and gender have significant difference in the incidence of osteoporosis; the disease classification according to T-score value has significant difference in the geometry of the proximal femur such as Cortical ratio calcar, Cortical ratio shaft, Hip/shaft Angle, Strength index, Section modulus, CSMI, and CSA, and is highly correlated with the incidence of osteoporosis. Therefore, the findings of this research is that the change of the geometry of the proximal femur could be used as an indicator in the diagnosis of osteoporosis, could enhance the accuracy of the diagnosis in the future, and could be used as a clinical predictive factors through the analysis of the correlations of T-score variance and the geometry changes of the proximal femur.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.6.2-6.2
• /
• 2011

Block copolymer (BCP) self-assembly in a film geometry has recently been the focus of increased research interest due to their potential use as templates and scaffolds for the fabrication of nanostructured materials. The phase behavior in a thin film geometry that confines polymer chains to the interfaces will be influenced by the interfacial interactions at substrate/polymer and polymer/air and the commensurability between the equilibrium period (L0) of the BCP and the total film thickness. We investigated the phase transitions for the films of block copolymers (BCPs) on the modified surface, like the order-to-disorder transition (ODT) by in-situ grazing incidence small angle x-ray scattering (GISAXS) and transmission electron microscopy (TEM). The selective interactions on the surface by a PS-grafted substrate provide the preferential interactions with the PS component of the block, while a random copolymer (PS-r-PMMA) grafted substrate do the balanced interfacial interactions on the surface. The thickness dependence of order-to-disorder behavior for BCP films will be discussed in terms of the surface interactions.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.2
• /
• pp.172-178
• /
• 2009

This paper reports on an investigation (using RSM with commercial CFD software) of the performance characteristics of the impeller in a centrifugal pump. Geometric parameters of vane plane development were defined with the meridional shape and frontal view of the impeller. The parameters are focused on the blade-angle distributions through the impeller in a fixed meridional geometry. For screening, a $2^k$ factorial design has been used to identify the important design parameters. The objective functions are defined as the total head rise and the total efficiency at the design flow-rate. From the $2^k$ factorial design results, it is found that the incidence angles and the exit blade angle are the most important parameters influencing the performance of the pump.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1127-1146
• /
• 2015

The excitation angle or angle of incidence is the angle in which the horizontal seismic components are applied with respect to the principal structural axes during a time history analysis. In this study, numerical simulations and parametric studies are performed for the investigation of the effect of the angle of seismic incidence on the response of adjacent buildings, which may experience structural pounding during strong earthquakes due to insufficient or no separation distance between them. A specially developed software application has been used that implements a simple and efficient methodology, according to which buildings are modelled in three dimensions and potential impacts are simulated using a novel impact model that takes into account the arbitrary location of impacts and the geometry at the point of impact. Two typical multi-storey buildings and a set of earthquake records have been used in the performed analyses. The results of the conducted parametric studies reveal that it is very important to consider the arbitrary direction of the ground motion with respect to the structural axes of the simulated buildings, especially during pounding, since, in many cases, the detrimental effects of pounding become more pronounced for an excitation angle different from the commonly examined 0 or 90 degrees.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.105-109
• /
• 2004

CFD simulation for Smart-UAV(TR-E2Sl) is performed to analyze its aerodynamic characteristics. Base geometry and several cases, decided by control surfaces being deflected, are simulated. To obtain the better lift characteristics, the elevator should be deflected between 10o and 20o with the incidence angle of the wing 1o.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.84-87
• /
• 2002

The Si$_{1-x}$ Gex/Si surface alloy (x = 0.3, 0.4 and 0.5), which are prepared by solid source MBE and have the SiGe epilayer thickness of 50$\AA$, are annealed with different parameters. The surface structure analyses of the heterostructure samples are made on a triple-axis X-ray diffractometer in grazing incidence X-ray diffraction (GIXRD) geometry. It has been found that with different annealing time (1.5h, 18h, 64h) and annealing temperature (550 $^{\circ}C$, 750 $^{\circ}C$), the SiGe epilayer experienced different strain relaxation process, which was deduced from the GIXRD measurements of the in-plane (220) diffraction peak of Si(001) substrate and the relevant (220) surface diffraction of SiGe epilayer. The results show that the stress relieving and the lateral strain relaxation in the SiGe/Si heterostructure can be promoted by correct annealing, which is very helpful for the preparation of SiGe/Si strained superlattice with fine strain crystallization..

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.504-507
• /
• 2006

Airborn Lidar technology has been applied to diverse applications with the advantages of accurate 3D information. Further, Lidar intensity, backscattered signal power, can provid us additional information regarding target's characteristics. Lidar intensity varies by the target reflectance, moisture condition, range, and viewing geometry. This study purposes to generate normalized airborne LiDAR intensity image considering those influential factors such as reflectance, range and geometric/topographic factors (scan angle, ground height, aspect, slope, local incidence angle: LIA). Laser points from one flight line were extracted to simplify the geometric conditions. Laser intensities of sample plots, selected by using a set of reference data and ground survey, werethen statistically analyzed with independent variables. Target reflectance, range between sensor and target, and surface slope were main factors to influence the laser intensity. Intensity of laser points was initially normalized by removing range effect only. However, microsite topographic factor, such as slope angle, was not normalized due to difficulty of automatic calculation.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1203-1208
• /
• 2009

In this paper, the flow characteristics of the mixed-flow pump impellers and diffusers were numerically predicted by commercial CFD software and DOE(design of experiments). We also discussed how to improve the performance of the mixed-flow pump by designing the impeller and diffuser in the mixed-flow pump. Geometric design variables were defined by the vane plane development which indicates the blade-angle distributions and length of the impeller and the diffusers. Firstly, the design optimization of the defined impeller geometric variables has been done. After that, the flow characteristics were analyzed in the point of incidence angle at the diffuser leading edge for the optimized impeller. Then design of the defined diffuser shape variables has been performed. The reason for the performance improvement was discussed by examining the flow characteristics through the diffuser.