• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.729-733
• /
• 1993

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.66
• /
• pp.59-67
• /
• 2001

This thesis is to research for analysis of ISO 9000 Quality Management System application status of small & medium-sized Industrial Companies. For this research, 10 companies certified by ISO 9000 standard were selected. By using an evaluation method and a software for analysis of application, this thesis compared, analyzed and evaluated the application status before and after certificate of ISO 9000, and identified the performance and difficulty of QMS application, and then proposed improvement methodology for ISO 9000 effective application.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.555-557
• /
• 2019

본 논문은 고객 가치를 극대화한 솔루션 전용화를 통해 전략시장을 집중 공략하고, 제품 진입 영역 확대 및 고부가가치 시장 창출을 주도한 LS산전의 Application 전용 저압 드라이브 개발 현황에 관한 것이다. 다양한 지역별 & Application별 목표 시장 공략을 위해 대응한 사례인 북미 오일 Pump Jack, 북미 향 Hoist, 인도 직물 공장, 중동 엘리베이터, 국내 PVC 장판 생산용 Winder 시장 등의 분야에서 전용화 한 사례들에 대한 전반적인 내용을 설명한다. 이와 같은 글로벌 Application 분야를 발굴하여 신 성장 동력을 창출하고, 고부가 가치를 고객별로 맞춤형 최적 Solution 적용하여 LS산전의 드라이브 시장에서 경쟁력과 시장 점유율을 증대하고자 한 사항을 확인 해 볼 수 있다.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.495-505
• /
• 2009

Unpaid Family Worker is blind area of industry safety. Danger of industrial accident is some high but because was excepted in industrial accident compensation insurance application. In most case, because paltry Unpaid Family Worker is no opportunity to take safety education to prevent industrial accidents and there are few safety facility and safety equipment, etc., among business, it may be said that probability to suffer industrial accidents on a trifling mistake or carelessness is higher than general worker of business. Consider such difficult actuality of Unpaid Family Worker and our country must give these benefit of industrial accident compensation insurance application, as opened the door of insurance application in recognition of worker position by "Industrial accident compensation insurance Law" to middle·smaller enterprise's business proprietor or special form labor employees.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2007.02a
• /
• pp.209-212
• /
• 2007

A very detail instruction of a m-Business application case for small scale company is given. Two results are proved. The one is that m-business application can reduce system building and maintaining fee. The other is that m-business application should running on the mobile machine with caching some application data on it.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.776-779
• /
• 2006

The alignment of liquid crystal (LC) is one of the key issues of liquid crystal display (LCD) technologies. In this study, we aligned polyimide (as the LC alignment layer) by ALT plasma beam and to realize the stability and characteristics of this technology. The characteristics such as anchoring energy, pre-tilt angle, voltage holding ratio(VHR) and residual direct current(Rdc) were discussed. Besides, we applied it to the in plane switch (IPS) mode 23" WXGA real panel, the performance parameters and electrical properties were measured and compared with those of rubbing alignment. From the result, we demonstrated a successful LC alignment treatment process in real panel by ALT plasma beam.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.117-131
• /
• 2018

Due to the paradigm shift of the industrial structure in the contemporary china society, the usage of practical function of industrial facilities goes down in this high developing society, so that it falls into some unused spaces. But the unused industrial facilities that including historical, symbolic and cultural meaning has been creating a new cultural space by giving architectural form and function through a variety of application methods for revitalization design. Especially, the facade design which fully expresses the function and meaning of building while properly expressing the cultural situation. It improves the living and cultural conditions of residents while giving the new symbolism of unused industrial facilities through various ways of application methods for revitalization. The unused industrial facilities that was reconstructed into the exhibition space in Beijing and Shanghai, china since 2006 is the object and scope of this study. The purpose of this study is to analyze the methods and characteristics of application methods for revitalization according to each component of the facade design in the idle industrial facility and to expect it to become basic data in the future design plan of unused industrial facilities.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.65-65
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.32-38
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.455-467
• /
• 2015

Objective: The present study suggested practical measures for successful patent registration based on a review of success and failure cases of patent application filed based on inventions obtained from physical ergonomics research. Background: The protection of intellectual property (IP) contributes to economic growth and competitiveness and facilitates innovation and creativity. IP rights are pursued on research findings for effective technology transfer and commercialization; however, a patent application can be rejected if patentability requirements such as patent eligible subject matter, utility for industrial application, novelty, or non-obviousness are not satisfied. Method: Three successful and three failed cases of patent applications based on physical ergonomics research were reviewed, critical reasons for their successes and failures were examined, and measures were proposed to avoid failures in patent registration. Results: The following measures were identified based on the patent application case review. First, abstract ideas including logical procedures and/or mathematical formulas need to include use of tangible apparatus and methods in idea realization. Second, the provision of grace period inventor disclosure exception needs to be properly followed in case an invention is disclosed before filing of patent application. Lastly, a comprehensive analysis of prior art published or publicly known anywhere in the world and a claim preparation of distinguished, non-trivial features compared to prior art solutions are needed to avoid possible violation of novelty and non-obviousness. Application: The proposed measures can help to prepare a patent application with patent eligibility.