• Applied Science and Convergence Technology
• /
• 제27권3호
• /
• pp.47-51
• /
• 2018

We fabricated an anode-type ion beam source and studied its driving characteristics of the initial extraction of ions using two driving mechanisms: a diffusion phenomenon and a charge repulsion phenomenon. For specimen exposed to the ion beam in two methods, the surface impurity element was investigated by using X-ray photoelectron spectroscopy. Upon Ar gas injection for plasma generation the ion beam source was operated for 48 hours. We found a Fe 2p peak 5.4 at. % in the initial ions by the diffusion mechanism while no indication of Fe in the ions released in the charge repulsion mechanism. As for a long operation of 200 min, the temperature of ion beam sources was measured to increase at the rate of ${\sim}0.1^{\circ}C/min$ and kept at the initial value of $27^{\circ}C$ for driving by diffusion and charge repulsion mechanism, respectively. In this study, we confirmed that the ion beam source driven by the charge repulsion mechanism was very efficient for a long operation as proved by little electrode damage and thermal stability.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.743-748
• /
• 2022

The initial operation stability of hydrogen-fueled, solid oxide fuel cell with Ni thin-film anode fabricated by direct current sputtering was evaluated in terms of electrochemical properties such as peak power density, open circuit voltage, overpotential, and alternating current impedance at 500℃. Hydrogen and air were used as anode fuel and cathode fuel, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1455-1458
• /
• 2008

Amorphous silicon (a-Si:H) thin-film transistors (TFTs) are fabricated on flexible organic polymer foil substrates. As-fabricated performance, electrical bias-stability at elevated temperatures, electrical response under mechanical flexing, and prolonged mechanical stability of the TFTs are studied. TFTs made on plastic at ultra low process temperatures of $150^{\circ}C$ show initial electrical performance like TFTs made on glass but large gate-bias stress instability. An abnormal saturation of the instability against operation temperature is observed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2002

A 765kV Transmission line system plays an important role in delivering the electric power produced at mid-western in Korea. This system will be constructed and operated normally on 2002. By doing the number of test operation in a given time, the reliability on the operation of 765kV transmission system could be secured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.227-230
• /
• 2002

A 765kV Transmission line system plays an important role in delivering the electric power produced at mid-western in Korea. This system will be constructed and operated normally on 2002. By doing the number of test operation in a given time, the reliability on the operation of 765kV transmission system could be secured.

• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.1-9
• /
• 1990

발전기-무한모선 계통에 대한 동적특성을 상세한 모델로 표현했을 때 A행열 원소들간의 상호 연관성을 전류모델 및 자속쇄교수모델에 대하여 규명하였다. A행열은 초기동작점과 관련있는 부분행열과 관련없는 부분행열로 분할할 수 있으며 여러개의 서로 다른 초기동작점에 대한 안정도 계산시 관련있는 부분행열만 열연산(Column Operation)으로 할 수 있음을 보였다. 이들 원소들을 발전기제작회사에서 제공하는 데이터로부터 직접적으로 계산할 수 있으며 초기상태변수값은 실효치를 그래도 시용할 수 있도록 하여, 상세한 모델의 A행열의 우너소계산을 간단히 할 수 있다.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.321-327
• /
• 2009

This paper studied the influences of the main design parameter-the expansion angle and the material properties of the self-expansion anterior cruciate ligament fixation device on the contact condition with the bone and the initial stability of the device. Using finite element analysis, the stress distributions of the ring part of the device and the wall of the bone tunnel were calculated. And the micro-migration of the device by the pull-out force was calculated. From the analysis results, it was found that when designing the self-expansion type anterior cruciate ligament fixation device, it is desirable to use the material having higher Young's modulus and to design the fixation device that all wedges uniformly maintain contact with bone to obtain initial stability after operation.

• 신재생에너지
• /
• 제3권1호
• /
• pp.60-67
• /
• 2007

Catalyst coated membrane [CCM] type and catalyst coated substrate [CCS] type of membrane electrode assembly [MEA] were manufactured and evaluated their performance. Degradation test were conducted to find the difference of long term stability in two types of MEA and the factor for performance degradation problem occurred. Performance degradation test of single cell in two different types of MEA were carried out when current density was $200mA/cm^{2}$. The degradation test had proceeded for 230 hours and performance degradation was checked by I-V curve and impedance measurement at regular intervals. Also, MEA before/after operation and changes of catalyst layer were characterized by SEM, TEM, and XRD. Maximum power density of CCM type was higher than that of CCS type. Meanwhile, an increase of particle size of catalyst and an increase of impedance resistance after long term operation were observed. In the case of using CCM type MEA, the performance was deteriorated 38% of initial performance. In the case of using CCS type MEA, the performance was deteriorated 43% of initial performance. In consideration of difference of initial performance, performance of CCM type is higher than that of CCS type but both types had similar problems during degradation test.

• Wind and Structures
• /
• 제32권2호
• /
• pp.169-177
• /
• 2021

This study investigates the effects of blade configuration and solidity of Darrieus wind turbine on the starting torque characteristics. Generally, the configuration of Darrieus wind turbine is divided into Troposkien, parabola, Catenary, Sandia, modified-parabola and straight types. A numerical analysis has been carried out using Multiple Stream Tube (MST) method to investigate the effect of blade configuration and solidity of Darrieus wind turbine on the starting torque under the initial low range of rotational speed. The simulation results show that the starting torque of Darrieus wind turbine varies considerably depending on the blade configuration. The initial starting torque was larger with Troposkien, Parabola, Catenary, and Sandia configurations than with modified parabola or straight types. The increase in solidity with increasing number of blades raised the starting torque and improved the dynamic stability during the initial operational speed of Darrieus wind turbine. Additionally, these torque results represent basic data for fluid-structure interaction (FSI) simulation of the steady-dynamic operation of the turbine.

• Journal of Yeungnam Medical Science
• /
• 제18권1호
• /
• pp.101-111
• /
• 2001

후방 십자 인대 손상에서 일차 복원술이 가능한 대퇴 부착부 파열과 경골 부착부 견열 골절환자를 대상으로 손상 부위와 동반 인대 손상 유무에 따른 후방 안정성과 주관적, 객관적 기능의 평가에서 Lysholm 기능 평가상 대퇴 부착부 손상군(85.3점)이 경골 부착부 견열 골절군(96.3점)에 비해 결과가 불량하였다(p<0.05). 그러나 단독 후방 십자 인대 손상군(91.1점)은 복합 인대 손상군(86.6점)에 비해 양호하였으나 통계적인 유의성은 없었다. 후방 십자 인대의 불안정성 정도는 후방 긴장성 사진과 KT 2000 슬관절계 검사상 대퇴 부착부 손상군보다 경골 견열 골절 손상군에서 나은 경향을 보이나 통계적인 유의성은 없었다. 또한 olecranization 시행은 후방 안정성에서 시행한 군이 나은 경향을 보여 심한 후방 불안정성이 있는 경우 수술 후 초기에 일시적인 후방 안정성에 도움을 줄 수 있을 것으로 생각된다.