• Journal of Preventive Medicine and Public Health
• /
• v.45 no.6
• /
• pp.344-352
• /
• 2012

Mercury is a toxic and non-essential metal in the human body. Mercury is ubiquitously distributed in the environment, present in natural products, and exists extensively in items encountered in daily life. There are three forms of mercury, i.e., elemental (or metallic) mercury, inorganic mercury compounds, and organic mercury compounds. This review examines the toxicity of elemental mercury and inorganic mercury compounds. Inorganic mercury compounds are water soluble with a bioavailability of 7% to 15% after ingestion; they are also irritants and cause gastrointestinal symptoms. Upon entering the body, inorganic mercury compounds are accumulated mainly in the kidneys and produce kidney damage. In contrast, human exposure to elemental mercury is mainly by inhalation, followed by rapid absorption and distribution in all major organs. Elemental mercury from ingestion is poorly absorbed with a bioavailability of less than 0.01%. The primary target organs of elemental mercury are the brain and kidney. Elemental mercury is lipid soluble and can cross the blood-brain barrier, while inorganic mercury compounds are not lipid soluble, rendering them unable to cross the blood-brain barrier. Elemental mercury may also enter the brain from the nasal cavity through the olfactory pathway. The blood mercury is a useful biomarker after short-term and high-level exposure, whereas the urine mercury is the ideal biomarker for long-term exposure to both elemental and inorganic mercury, and also as a good indicator of body burden. This review discusses the common sources of mercury exposure, skin lightening products containing mercury and mercury release from dental amalgam filling, two issues that happen in daily life, bear significant public health importance, and yet undergo extensive debate on their safety.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.23-28
• /
• 2008

Functional hanji was manufactured using the bast fiber of Broussonetia kazinoki and various inorganic compounds such as kaolin, talc, elvan, and ocher, and the physical and optical properties were investigated. The residual percentages of kaolin, talc, elvan and ocher in the functional hanji were above 50%. The density of the hanji increased with the increase of the content of inorganic compounds. The hanji manufactured using ocher showed the highest density. The breaking length and burst factor decreased with the increase of inorganic materials, indicating that physical properties of hanji were not improved by adding inorganic materials. The emission rates of far-infrared radiation increased in the hanji manufactured using inorganic materials. The higher emission rates were observed in the hanji with elvan or ocher. Addition of inorganic compounds to hanji showed the flame retardative effect. The colorfastness to light of the hanji with elvan or ocher was the degree of 4, which explained by the characteristic color of the inorganics.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.138-143
• /
• 2011

EPDM compounds and vulcanizates containing inorganic filler such as talc, calcium carbonate, or clay as well as carbon black were prepared, and the influence of inorganic filler on properties of the EPDM compounds and vulcanizates were investigated. The bound rubber contents did not significantly increase even though the inorganic filler was added. There were big aggregates in the EPDM samples with high loading inorganic filler. By adding the inorganic filler, the cure times tended to increase and the delta torque decreased. The modulus were on the whole decreased, whereas the elongation at break, tensile strength, and tear strength were increased by adding the inorganic filler. The decreased modulus and increased elongation at break can be explained with the decreased delta torque, the increases of tensile strength and tear strength can be explained with the increased elongation at break. By adding the inorganic filler, level of reinforcing in the EPDM compounds did not increase and the crosslink density decreased.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.55-62
• /
• 2021

This study aims to reduce the rancid odor generated during the fermentation process of kimchi by inserting zinc oxide (ZnO) into an inorganic porous material with a high surface area to decompose or adsorb the fermentation odor. ZnO activated by the presence of moisture exhibits decomposition of rancid odors. Mixed with Titanium dioxide (TiO₂), a photocatalyst. To manufacture the packaging liner used in this study, NaOH, ZnCl₂, and TiO₂ powder were placed in a tank with diatomite and water. The sludge obtained via a hydrothermal ultrasonication synthesis was sintered in an oven. After being pin-milled and melt-blended, the powders were mixed with linear low-density polyethylene (L-LDPE) to make a masterbatch (M/B), which was further used to manufacture liners. A gas detector (GasTiger 2000) was used to investigate the total amount of sulfur compounds during fermentation and determine the reduction rate of the odor-causing compounds. The packaging liner cross-section and surface were investigated using a scanning electron microscope-energy dispersive X-ray spectrometer (SEM-EDS) to observe the adsorption of sulfur compounds. A variety of sulfur compounds associated with the perceived unpleasant odor of kimchi were analyzed using gas chromatography-mass spectrometry (GC-MS). For the analyses, kimchi was homogenized at room temperature and divided into several sample dishes. The performance of the liner was evaluated by comparing the total area of the GC-MS signals of major off-flavor sulfur compounds during the five days of fermentation at 20℃. As a result, Nano-grade inorganic compound liners reduced the sulfur content by 67 % on average, compared to ordinary polyethylene (PE) foam liners. Afterwards SEM-EDS was used to analyze the sulfur content adsorbed by the liners. The findings of this study strongly suggest that decomposition and adsorption of the odor-generating compounds occur more effectively in the newly-developed inorganic nanocomposite liners.

• Journal of the Korean Chemical Society
• /
• v.52 no.4
• /
• pp.394-403
• /
• 2008

• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4449-4459
• /
• 2022

In this study, an NF₃ plasma etching reaction with a cobalt oxide (Co₃O₄) films grown on the surface of inorganic compounds using granite was investigated. Experimental results showed that the etching rate can be up to 1.604 mm/min at 380 ℃ under 150 W of RF power. EDS and XPS analysis showed that main reaction product is CoF₂, which is generated by fluorination in NF₃ plasma. The etching rate of cobalt oxide films grown on inorganic compounds in this study was affected by surface roughness and etch selectivity. This study demonstrates that the plasma surface decontamination can effectively and efficiently remove contaminated nuclides such as cobalt attached to aggregate in concrete generated when decommissioning of nuclear power plants.

• The Korean Journal of Mycology
• /
• v.18 no.2
• /
• pp.109-114
• /
• 1990

The effect of different carbon and nitrogen compounds on the growth and sporula­tion of Curvularia clavata Alcorn (Herberium No. IMI264075) has been studied. All the carbon sources tried were well utilized by the pathogen though glucose, and sucrose supported the best growth while glucose, maltose and sucrose the sporulation of the fungus. Of the nine nitrogen compounds, L-glutamic acid supported the best growth while aspartic acid and L-glutamic acid the sporulation of the fungus. Growth and sporulation were generally better with organic than inorganic nitrogen sources. Ammonium sulphate was the best inorganic source. A sudden drop of pH value of the culture media after 4 days of incubation did not favour good growth of the fungus.

• Korean Journal of Microbiology
• /
• v.20 no.1
• /
• pp.27-40
• /
• 1982

The effects of heavy metals on the growth rate and phosphate metabolism of Chlorella elliposidea cells were investigated. Chlorella cells were cultured in the media treated with Hg(0.3, 0.7, 0.9 ppm), Cd(1, 5, 15ppm), and Zn(1, 5, 50ppm) for 6days. Aliquots cells were taken out at the inoculation and at intervals during the culture, and measured packed cell vlolume and optical density. The inhibitions of heavy metals on the growth rate and chlorophyll contents were traced. Also after 6 days culture, the amounts of inorganic phosphate and organic compounds of various fractions in Chlorella cells were observed. The turbid effects of heavy metals on the growth rate and chlorphyll contents of Chlorella cells were in order of Hg>Cd>Zn. Because heavy metals depressed the biosynthesis of inorganic polyphosphates and nucleic acids and turn over of inorganic phosphates, the amounts of various phosphate compounds were decreased. The inhibitory effect of photosynthesis by heavy metals resulted in lower contents of carbohydrate. Due to the turbidity of biosynthesis of amino acids by heavy metals, contents of protein were reduced in comparison with those of control. It is suggested conciusively that the minimum concentrations affected by heavy metals on the growth rate and phosphate metabolism of Chlorella cells were 0.7 ppm Hg, 15ppm Cd, 50ppm Zn.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.84-88
• /
• 1999

A method to analyze additives in a polyester resin has been studied by utilizing a centrifuge and a thin layer chromatography. Identification of the separated organic and inorganic compounds were carried out by spectrophotometers, such as NMR, UV-VIS, IR and XRD. For the polyester resin studied in this research contained organic and inorganic compounds which were found to be a dimer form of 2-phenylbenzoazole and an anatase form of $TiO_2$, respectively.

• Nuclear Engineering and Technology
• /
• v.5 no.1
• /
• pp.44-54
• /
• 1973

In order to clarify an effective procedure of labelling organic chloro compounds by $^{38}$ Cl, phenyl chloro derivatives(7 kinds), chloro nitrobenzenes(6 kinds), chloro anisoles(2 kinds), chloro anilines(3 kinds), chloro toluenes(3 kinds), benzyl cholorides(4 kinds), and other comparing samples(3 kinds) were irradiated in the TRIGA Mark-II research reactor and the inorganic $^{38}$ Cl yields were compared with the irradiation times after extracting the inorganic portion with an aqueous solution of alkali. It was found that the relative change between the inorganic $^{38}$ Cl yield and the irradiadiation time depends a great deal on the state of the sample, and a solid sample gave a lower and steady inorganic yield. The inorganic $^{38}$ Cl yield was decreased in the order of phenyl chloro derivatives < chloro tol uene$^{38}$ Cl yield of homo functional compounds and the number of chlorine atoms on the benzene ring. Generally, poly chloro substituted derivatives could give a higher yield than those of less chloro substituted. The results were discussed and the feasibility of these results for labelling purpose was criticized.