• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1281-1292
• /
• 2014

Photovoltaic (PV) solar systems with series-connected module integrated converters (MICs) are receiving increased attention because of their ability to create high output voltage while performing local maximum power point tracking (MPPT) control for individual solar panels, which is a solution for partial shading effects in PV systems at panel level. To eliminate the partial shading effects in PV system more effectively, sub-MICs are utilized at the cell level or grouped cell level within a PV solar panel. This study presents the results of a series-output-connection MPPT (SOC-MPPT) controller for sub-MIC architecture using a single sensor at the output and a single digital MPPT controller (sub-MIC SOC-MPPT controller and architecture). The sub-MIC SOC-MPPT controller and architecture are investigated based on boost type sub-MICs. Experimental results under steady-state and transient conditions are presented to verify the performance of the controller and the effectiveness of the architecture.

• 항공우주시스템공학회지
• /
• 제16권1호
• /
• pp.86-96
• /
• 2022

제트 전투기의 항공전자 시스템 아키텍처 개발 경향은 서브 시스템 구성요소 기능의 디지털화, RF 센서 공유의 증가, 광섬유 채널 네트워크, 그리고 모듈화된 통합 구조이다. 5세대 제트 전투기(F-22, F-35)의 항공전자 시스템 아키텍처는 컴퓨팅 기능 통합과 RF 통합 센서 시스템 기반인 통합 모듈형 항공전자 시스템으로 발전했다. 제트 전투기의 통합 항공전자 시스템은 전투기의 전투력 향상, 내결함성 및 제어 용이성을 제공해야한다. 이를 위해 본 논문에서는 5세대 제트 전투기의 항공전자 시스템 아키텍처 분석을 통해 차세대 제트 전투기의 항공전자 시스템 아키텍처의 방향과 요구사항을 제시한다. 차세대 통합 모듈화 항공전자 시스템 아키텍처 요구사항들의 핵심 과제는 주요 구성 장치와 센서들을 항공기에 통합하는 플랫폼을 구축하는 것이라 할 수 있다. 즉, 차세대 전투기의 아키텍처는 시스템의 표준화와 개방형 인터페이스를 통한 각 서브 시스템의 센서통합, 기능요소 통합, 네트워크 통합이며 조종사와 전투기의 일체화로 고자율적 대응 및 제어능력 향상에 있다.

• Architectural research
• /
• 제14권4호
• /
• pp.117-124
• /
• 2012

High rise office buildings represent one of the most energy-intensive architectural typologies. The growth of urban population necessitates sustainable high rise towers that lessen environmental impacts and energy consumption. Among various sustainable strategies, the integrated design is long known to be an important process that has great impact on building's sustainability. The framework for this paper is based on the case study of integrated towers that are located in different climate zones. The paper specifically addresses to what extent climate conditions influence the design of a high rise building and what kinds of the climate integrated design has been implemented. Qualitative case studies were carried out using published data and architectural drawing set. The technical work presented in the paper is based on computer simulation that examines the insolation analysis using hourly recorded weather data. The analysis results revealed that the site and building envelope integration and the site and building service systems have shown the most frequently employed in the integrated towers through the implementation of renewable resource integration, high performance envelopes and sustainable building service systems. Internal comfort and further energy saving in the integrated towers are offered through an automatic building management system. Due to the dynamic climate conditions, integration of building systems requires a sophisticated approach to building sustainability.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제19권1호
• /
• pp.35-46
• /
• 2013

Purpose: Health is one of the most important interests in current and future human society. Various efforts, which to maintain and promote their good health conditions, continue to be tried in future urban and architectural environment. The purpose of this study is to establish an integrated framework of research approaches for healthy urban and architectural environment that continuously promotes health according to people's entire life course. Methods: This was done by literature reviews, which is related to interdisciplinary researches for the determinants of health and healthy environment. Results: As a result of this study, an integrated research model, as a methodology, was proposed. This explains the concept of integrated research approaches for urban and architectural environment in the respect of people's health. Integrated health concept includes not only the area of health care environment to have recovery and treatment but also the daily living environment for people who have potential of being ill, and finally the city environment for entire people as health supporting elements including safety and primary prevention. Implications: Under the basis of this model, according to the life course, various researches on sustainable healthy urban and architectural environment should be followed from now on. The model should also be continuously complemented and developed into a standard of healthy environment.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.130-140
• /
• 2016

Floating floor is most commonly used at apartment houses in Korea for thermal insulation and reducing impact noise. But it in proven that the floating floor is not effective for reducing the floor impact noise in low frequency range. In most cases, impact sound pressure level under 63 Hz frequency band were actually increased by the resonance of resilient material, lightweight concrete and the finishing mortar installed on it. In this paper, an integrated floor system consist of 70 mm light weight concrete and 40 mm finishing mortar successively installed on the concrete slab was suggested to avoid the resonance. Integrated floor system increases total flexural stiffness and mass per unit area. The natural frequencies of first and second vibration mode were increased and acceleration response and floor impact sound level was decreased in all measurement range.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제8권3호
• /
• pp.97-108
• /
• 2019

디지털 콘텐츠 재화가 증가됨에 따라 이를 관리하기 위한 콘텐츠 관리 시스템에 새로운 콘텐츠 서비스를 추가하거나 기존 콘텐츠 관리 시스템 간에 통합하는 경우가 빈번하게 발생한다. 효율적인 시스템 통합을 위해 본 논문에서는 이 기종으로 구성된 두개의 콘텐츠 관리 시스템을 마이크로서비스 아키텍처 기반으로 통합 콘텐츠 관리 시스템을 설계하여 개발 간 기존 시스템의 중단 없이 재활용이 가능하고, 효율적으로 통합이 가능하며, 확장성을 가진 시스템을 구현하였다. 이를 통해 구현된 시스템의 소요되는 자원 사용량을 측정하고, 기존 미들웨어를 사용한 시스템 통합을 방식 간의 차이점을 분석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.367-375
• /
• 2020

This paper presents an integrated analysis about dynamic performance of a Floating Offshore Wind Turbine (FOWT) OC4 DeepCwind with semi-submersible platform under real sea environment. The emphasis of this paper is to investigate how the wave mean drift force and slow-drift wave excitation load (Quadratic transfer function, namely QTF) influence the platform motions, mooring line tension and tower base bending moments. Second order potential theory is being used for computing linear and nonlinear wave effects, including first order wave force, mean drift force and slow-drift excitation loads. Morison model is utilized to account the viscous effect from fluid. This approach considers floating wind turbine as an integrated coupled system. Two time-domain solvers, SIMA (SIMO/RIFLEX/AERODYN) and FAST are being chosen to analyze the global response of the integrated coupled system under small, moderate and severe sea condition. Results show that second order mean drift force and slow-drift force will drift the floater away along wave propagation direction. At the same time, slow-drift force has larger effect than mean drift force. Also tension of the mooring line at fairlead and tower base loads are increased accordingly in all sea conditions under investigation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 추계학술대회
• /
• pp.165-172
• /
• 2009

Integrated management model (SNMP/SMI) for lubiquitous egacy remote communication network or service make possible combination of various architecture. However, legacy management system cannot be applied some problems such as inefficient, complexly, implement and large network by reason of integration of voice and data, wired and wireless, and service area between service provider. For improve this, supplied JMX(Java Management eXtensions) on network management technology from SUN. JMX is integrated architecture for existing network management and monitoring. In this paper, we design and implement for integrated network management through multi-protocol agent using JMX.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.17-24
• /
• 2006

The application of photovoltaics into building as integrated building components has been paid more attention worldwide. Photovoltaics or solar electric modules are solid state devices, directly converting solar radiation into electricity; the process does not require fuel and any moving parts, and produce no pollutants. And the prefab building method is very effective because the pre- manufactured building components is simply assembled to making up buildings in the construction fields especially the sandwich panel. Architecture considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully refelected from the early stage of BIPV module design. Trial product of BIPV module are manufactured and sample construction details for demonstration building are purposed. Therefore, this paper intends to advanced its practical use by proposing how to get integrated PV system which can be applied to prefab building material, and how to apply it.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.343-350
• /
• 1999

This study introduce how distributed object technology can be applied effectively to use in a integrated structural design systems environment with the rapid increasement in the use of network technology. The architecture and management models of the developed systems are described by the CORBA(Com mon Object Request Broke Architecture) distribution standard and objects in Java language. The proposed system can be used for communicating with data between remote designers, regardless of the H/W or S/W platforms they use. Introduction of distributed objects methodologies to a Integrated structural design systems provide advanced levels of integration in structural design environment.