• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.7-12
• /
• 2003

• 산업경영시스템학회지
• /
• 제21권47호
• /
• pp.113-124
• /
• 1998

Manufacturing systems are becoming intelligent, decentralized, autonomous, which is so called as Intelligent Manufacturing Systems(IMS). In this paper, a method for efficient resource management in Holonic Manufacturing System which is one alternative of IMS, was developed. The developed method was evaluated with the current possible method and the results are shown.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1564-1569
• /
• 1991

In this paper we describe Flexible Manufacturing Systems (FMS) using Petri nets, since Petri nets provide a powerful tool for modeling dynamical behavior of discrete concurrent processes. We deal with off-Line and on-Line rule-based scheduling of FMS. The role of the rule-base is to generate appropriate priority rule for resolving conflicts, that is, for selecting one of enabled transitions to be fired in a conflict set of the Petri nets. This corresponds to select a part type to be processed in the FMS. Towards developing more Intelligent Manufacturing Systems (IMS) we propose a conceptual framework of a futuristic intelligent scheduling system.

• 한국정밀공학회지
• /
• 제25권10호
• /
• pp.99-106
• /
• 2008

5kWh FESS(Flywheel Energy Storage System) using AMB(Active Magnetic Bearing) has been under development and 1st trial system has been finished and run the operating test. Unfortunately, the test result was not satisfactory because FESS could increase the rotational speed up to 9,000 rpm only although the target rotational speed is 18,000rpm. It's because 1st bending mode frequency of flywheel shaft was too low and imbalance response was too big. To achieve the target speed, 1st bending mode and imbalance response must be improved and the whole FESS needed to be designed again. This paper presents the newly designed FESS and what has been changed from the 1st trial FESS to improve 1st bending mode and imbalance response. The experimental results to see how much 1st bending mode frequency was improved are presented, too.

• 한국시뮬레이션학회논문지
• /
• 제5권1호
• /
• pp.67-79
• /
• 1996

This paper proposes an intelligent simulation generator, called INSIMS, for manufacturing systems. The INSIMS provides an interactive dialogue interactive dialogue interface and code generation tools for modeling and code genration of manufacturing systems. The interactive dialogue interface helps non-expert simulation modeler specify manufacturing systems with ease. After completing the model construction processes, the modeling specifications are automatically converted into SLAM II codes by code generation tools. To validate the usefulness of INSIMS and to illustrate the modeling processes, an example system has been presented.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.467-470
• /
• 2004

MANPro-based control is a novel control paradigm aimed at intelligent manufacturing systems on the basis of mobile agent-based negotiation process (MANPro). MANPro is a negotiation mechanism based on the agent-based control architecture and, especially, it adapts a mobile agent system called N-agent for the negotiation process. N-agent travels around the network of distributed manufacturing systems to acquire information, and it makes a decision for system control according to the obtained information. MANPro includes communication architecture and information architecture for intelligent shop floor control. MANPro also considers the following issues: (1) negotiation mechanism, (2) single-agent internal strategic policies, and (3) information model. Communication architecture concerns the first issue of the negotiation mechanism. It provides information exchanging mechanism with functional modules. In specific, N-agent is equipped with an intelligent reasoning engine with a built-in knowledge base. This reasoning engine is closely related to the single-agent internal strategic policies of the second issue. Finally, ontology-based information architecture addresses information models and provides a framework for information modeling on negotiation. In this paper, these three issues are addressed in detail and a framework of MANPro-based control is also proposed.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.39-47
• /
• 2015

Globalization, unpredictable markets, increased products customization and frequent changes in products, production technologies and machining systems have become a complexity in today's manufacturing environment. One key strategy for coping with the evolution of this situation is to develop or apply an enable technology such as intelligent manufacturing. Intelligent manufacturing system (IMS) is characterized by decentralized, distributed, networked compositions of heterogeneous and autonomous systems. The model of IMS is inherited from the organization of the living systems in biology and nature so that the manufacturing system has the advanced characteristics inspired from biology such as self-adaptation, self-diagnosis, and selfhealing. To prove this concept, an innovative system with applying the advanced information and communication technology such as internet of things, cognitive agent are proposed to integrate, organize and allocate the machining resources. Innovative system is essential for modern machining system to flexibly and quickly adapt to new challenges of manufacturing environment.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.79-86
• /
• 2009

Recently PMSM(Permanent magnet synchronous motor) are used for the various direct drive applications such as index table, telescope system and so on. Because the position/speed control performance of direct drive PMSM is directly affected by the torque ripple, there are lots of studies to reduce the cogging torque in the motor design stage. In order to verify the motor design, the reliable cogging torque measurement system is essentially required. The measured motor must be rotated in the constant speed under 1deg/sec so that the cogging torque profile is measured correctly. In this study, the cogging torque measurement system which uses the direct drive PMSM and the speed controller to rotate the measured motor in 0.1rpm(0.6deg/sec) has been developed. Simulink/xPC target was used for the controller and data acquisition system. Based on PI controller, DOB and AFC have been applied to eliminate the low frequency disturbances and the periodic speed ripple. The experimental results show the good performance of the speed regulation for the reference speed 0.1rpm and the reliable profile of the measured cogging torque by the developed speed controller.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.187-190
• /
• 2003

Many manufacturing companies consider the integrated and concurrent scheduling because they need the global optimization technology that could manufacture various products more responsive to customer needs. In this paper, we propose an advanced scheduling model to generate the schedules considering resource constraints and precedence constraints in make-to-order (MTO) manufacturing environments. Precedence of work- in-process(WIP) and resources constraints have recently emerged as one of the main constraints in advanced scheduling problems. The advanced scheduling problems is formulated as a multiobjective mathematical model for generating operation schedules which are obeyed resources constraints, alternative workstations of operations and the precedence constraints of WIP in MTO manufacturing. For effectively solving the advanced scheduling problem, the multi-objective hybrid genetic algorithm (m-hGA) is proposed in this paper. The m-hGA is to minimize the makespan, total flow time of order, and maximum tardiness for each order, simultaneously. The m-hGA approach with local search-based mutation through swap mutation is developed to solve the advanced scheduling problem. Numerical example is tested and presented for advanced scheduling problems with various orders to describe the performance of the proposed m-hGA.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.223-226
• /
• 1996

One of the consideration issue in implementation and maintanence of CIM(Computer Integrated Manufacturing) database is exchange and sharing of information between heterogeneous databases. For efficient operating of SIM systems, it must be able to organize and to manage the information. In this paper, we propose method that can make enhance the efficiency of CIM database, classfying the data in database using self organize neural network to each database systems, and computing between classfied heterogeneous database using extended operator that is defined.