• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.377-381
• /
• 2009

Tetragonal-NiSi (010)/Si superstructures were calculated for studying the interface structure using density functional theory, The orthorhombic-NiSi was changed to the tetragonal-NiSi to be matched with the Si surface for epitaxy interface. The eight interface models were produced by the type of the Si surfaces, The tetragonal-NiSi (010)/Si (020)[00-1] superstructure was energetically the most favorable, and the interface thickness of this superstructure was the shortest among the tetragonal-NiSi (010)/Si superstructures. However, in the case of tetragonal-NiSi (010)/Si (010)[00-1] superstructure, it was energetically the most unfavorable, and the interface thickness was the longest. The energies and interface thicknesses of tetragonal-NiSi (010)/Si superstructures were influenced by the coordination number of Ni atoms and the bond length between atoms located at the interface.

• 한국통신학회논문지
• /
• 제33권5C호
• /
• pp.361-370
• /
• 2008

여러개의 프로세서와 IP들로 이루어진 MPSoC 시스템은 모듈간 통신을 위해 NoC가 지원되어야 한다. NoC는 스위치의 추가만으로 시스템을 쉽게 확장할 수 있는 장점을 가지고 있으나, 시스템의 복잡도가 증가함에 따라 NoC를 구성하는 스위치의 수가 증가하게 되며, 증가된 스위치로 인해 전체 시스템 면적과 데이터 전송 latency가 증가하게 된다. 본 논문에서는 network interface를 공유하여 시스템에서 요구되는 스위치의 수를 감소시켜 전체 시스템의 면적 및 데이터 전송 latency를 감소시키는 방안을 제시한다. Network interface에 연결된 모듈간 버퍼를 공유하는 방식을 사용하여 network interface의 면적을 감소시켰다. 실험결과 스위치 수 및 network interface의 면적감소로 인해 전체 시스템의 면적은 기존에 비해 평균 46.5% 감소하였으며, 데이터 latency는 평균 17.1% 감소하였다.

• 디자인학연구
• /
• 제19권2호
• /
• pp.183-194
• /
• 2006

본 논문은 인식론적인 측면에서 디지털 인터페이스의 새로운 가능성을 확인하는데 그 목적이 있다. 우선 디지털 인터페이스의 역사를 개관함으로써 현재의 인터페이스가 우연적 계기들의 산물임을 밝히고 있다. 그것이 필연적인 결과가 아니라는 사실은 새로운 디지털 인터페이스가 무한히 존재할 수 있음을 암묵적으로 증언한다. 현실의 제한된 인터페이스는 디지털 기술과 디지털 미디어에 대한 제한적 이해로부터 파생하였다. '블랙박스'라는 은유를 통한 이해가 바로 그것이다. 본 논문은 디지털을 일종의 빛으로 보는 사유를 통해 이러한 이해를 극복하고 있다. 빛으로서의 디지털과 디지털 미디어라는 새로운 인식론은 인터페이스 디자인 활동이 차이를 긍정하고 생성하는 창조적 활동으로 나아가야 한다는 윤리학으로 발전한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.665-668
• /
• 2003

In this paper, we have designed and implemented the RAID controller board which connects to the host computer with serial ATA interface and connects to the disks with parallel ATA interface. Serial ATA interface is proposed to overcome the design limitation of parallel ATA while enabling the storage interface to scale with the slowing media rate demands for PC platforms. Serial ATA is to replace parallel ATA with the compatibility with existing operating systems and drivers, adding performance headroom for years to come. It Moreover, serial ATA provides even faster transfer rate of 150 Mbytes/s which is larger than that of current parallel ATA. The RAID controller board designed in this paper combines up to 4 disks with parallel ATA interface, and connects to PC host computer with serial ATA interface. We have implemented RAID controller using Verilog HDL language with FPGA chip. The RAID controller supports RAID level 0 and 1 functionality. Experimently, the average read/write performance of parallel ATA interface is about 30 Mbytes/s. Therefore, when 4 parallel disks is connected to the RAID controller board, we can get almost full throughput of serial ATA protocol using the RAID level 0 configuration with 4 disks.

• 한국멀티미디어학회논문지
• /
• 제23권12호
• /
• pp.1454-1463
• /
• 2020

An important factor in eye-tracking PC interface for general paralyzed patients is the implementation of the mouse interface, for manipulating the GUI. With a successfully implemented mouse interface, users can generate mouse events exactly at the point of their choosing. However, it is difficult to define this interaction in the eye-tracking interface. This problem has been defined as the Midas touch problem and has been a major focus of eye-tracking research. There have been many attempts to solve this problem using blink, voice input, etc. However, it was not suitable for general paralyzed patients because some of them cannot wink or speak. In this paper, we propose a mouth-pop-up, eye-tracking mouse interface that solves the Midas touch problem as well as becoming a suitable interface for general paralyzed patients using a common RGB camera. The interface presented in this paper implements a mouse interface that detects the opening and closing of the mouth to activate a pop-up menu that the user can select the mouse event. After implementation, a performance experiment was conducted. As a result, we found that the number of malfunctions and the time to perform tasks were reduced compared to the existing method.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.91-98
• /
• 2022

Multi-layered geotextile tubes may have problems on its stability when used as cofferdam. This study presents the shear strength characteristics at the interface between geotextiles and a cementitious binder material to improve the stability of the multi-layered geotextile tubes. In this study, two different types of geotextiles are used. After mixing with a rapid setting cement, fly ash, sand, accelerator, and water, the cementitious binder material is prepared at the interface between two geotextile samples and cured under water for a desired period. The specimen is placed on upper and lower direct shear boxes by using clamping systems. A series of direct shear tests for two different geotextiles are performed along the curing time under three vertical stresses. Experimental results show that the shear strength at the interface between the cementitious binder material and geotextiles is greater than that at the interface between two geotextiles. For two types of geotextiles, apparent cohesion occurs at the interface between the cementitious binder material and geotextiles. In addition, the friction angles for any curing time are improved, compared to the interface between two geotextiles. The cementitious binder material suggested for the interface between two geotextiles may be useful for the reinforcement of multi-layered geotextile tubes.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.663-671
• /
• 2023

Freeze-thaw cycles induce strength loss at the frozen soil-concrete interface and deterioration of bonding, which causes construction engineering problems. To clarify the deterioration characteristics of the interface under the freeze-thaw cycle, a frozen soil-concrete sample was used as the research object, an interface scanning electron microscope test under the freeze-thaw cycle was carried out to identify the micro index information, and an interface shear test was carried out to explore the loss law of interface shear strength under the freeze-thaw cycle. The results showed that the integrity of the interface was destroyed, and the pore number and pore size of the interface increased significantly with the number of freeze-thaw cycles. The connection form gradually deteriorates from surface-to-surface contact to point-to-surface contact and point-to-point contact, and the interfacial shear strength decreases the most at 0-3 freeze-thaw cycles, with small decreases from to 3-8 cycles. After 12 freeze-thaw cycles, the interfacial shear strength tends to be stable, and shear the failure occurs internally in the soil.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.545-551
• /
• 2023

본 논문에서는 인터페이스 속의 가상환경을 현실로 옮겨오는 방법으로 환경인터페이스를 제시하고 실제 환경에서 감각할 수 있는 가상에 대한 경험을 설명하고자 한다. 실제 환경과의 구분 없는 가상을 표현하기 위한 인터페이스의 조건으로 인터페이스의 투명성과 공감각을 확대하는 상호 작용성에 대해 논의하고, 이러한 조건을 충족하는 환경인터페이스의 구성과 필연성에 대한 논의를 정립함으로서 확장된 경험을 유도하는 실제 환경에서 연장되는 인터페이스, 상호작용에 의한 환경으로의 인지 확대, 이 조건들로 인한 환경으로의 몰입을 위한 가상을 현실화하기 위한 도구로서 환경인터페이스에 대해 논의한다.

• 감성과학
• /
• 제12권3호
• /
• pp.325-330
• /
• 2009

신기술의 지속적인 적용으로 휴대폰의 사용 난이도가 높아짐에 따라 user interface의 중요성이 강조되고 있다. User interface 개발 프로세스의 복잡도와 이에 따르는 로드 또한 지속적으로 높아지고 있다. 본 논문에서는 체계화된 휴대폰 user interface의 개발 방법론에 대하여 논의하였다. 기존 휴대폰 개발 프로세스를 검토하고, 이에 따르는 개발상의 이슈사항을 살피고, 4단계의 가이드라인 적용을 통한 user interface 개발 프로세스를 제안하고 있다. 기존 유저 인터페이스와 관련한 연구들은 대부분 개발 대상에 대해 집중되어 있으나 좋은 user interface는 좋은 UI개발 프로세스를 통하여 실현될 수 있으며, 때문에 UI 매니지먼트 레벨의 논의는 제품 UI 개발과는 별도로 다루어질 필요가 있다. 본 논문에서 제시된 4단계 가이드라인은 휴대폰의 UI 개발뿐만 아니라 타제품 및 서비스의 UI개발에도 응용될 수 있을 것으로 사료된다.

• Geomechanics and Engineering
• /
• 제22권3호
• /
• pp.245-254
• /
• 2020

The interaction between the frozen soil and building structures deteriorates with the increasing temperature. A nuclear magnetic resonance (NMR) stratification test was conducted with respect to the unfrozen water content on the interface and a shear test was conducted on the frozen soil-structure interface to explore the shear characteristics of the frozen soil-structure interface and its failure mechanism during the thawing process. The test results showed that the unfrozen water at the interface during the thawing process can be clearly distributed in three stages, i.e., freezing, phase transition, and thawing, and that the shear strength of the interface decreases as the unfrozen water content increases. The internal friction angle and cohesive force display a change law of "as one falls, the other rises," and the minimum internal friction angle and maximum cohesive force can be observed at -1℃. In addition, the change characteristics of the interface strength parameters during the freezing process were compared, and the differences between the interface shear characteristics and failure mechanisms during the frozen soil-structure interface freezing-thawing process were discussed. The shear strength parameters of the interface was subjected to different changes during the freezing-thawing process because of the different interaction mechanisms of the molecular structures of ice and water in case of the ice-water phase transition of the test sample during the freezing-thawing process.