• Korea-Australia Rheology Journal
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2006

High internal phase emulsions are highly concentrated emulsion systems consisting of a large volume of dispersed phase above 0.74. The rheological properties of high internal phase water-in-oil emulsions were measured conducting steady shear, oscillatory shear and creep/recovery experiments. It was found that the yield stress is inversely proportional to the drop size with the exponent of values between 1 and 2. Since the oil phase contains monomeric species, microcellular foams can easily be prepared from high internal phase emulsions. In this study, the microcellular foams combining a couple of thickeners into the conventional formulation of styrene and water system were investigated to understand the effect of viscosity ratio on cell size. Cell size variation on thickener concentration could be explained by a dimensional analysis between the capillary number and the viscosity ratio. Compression properties of foam are important end use properties in many practical applications. Crush strength and Young's modulus of microcellular foams polymerized from high internal phase emulsions were measured and compared from compression tests. Of the foams tested in this study, the foam prepared from the organoclay having reactive group as an oil phase thickener showed outstanding compression properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.1-7
• /
• 2007

Internal fibrillation of pulp fiber is an important factor affecting paper properties. Internal fibrillation of pulp fiber is usually introduced with several kinds of modifications of fiber by the mechanical treatment such as refining, high shear and/or high consistency mixing, etc. Unfortunately there are no standardized methods that can characterize the extent of internal fibrillation and its contribution on the paper properties. The purpose of this study is to try and find the potential methods that can characterize the internal fibrillation of pulp fiber quantitatively. Softwood bleached kraft pulp was treated with Hobart mixer to introduce the internal fibrillation without the significant fiber damage and external fibrillation. The extent of internal fibrillation was increased with the increase of mechanical treatment consistency. Several fiber properties were measured to find the potential means that could characterize and quantity the internal fibrillation. Laminated area could not be used as a means for quantifying the internal fibrillation because of the effect of swelling and the different internal fibrillation behavior at different mechanical treatment consistency. Micro and macro internal fibrillation models were proposed for describing the different behavior for the mechanical treatment at low and high consistencies of pulp. The Internal fibrillation showed good correlation with swelling of fiber wall. This trend was confirmed through the measurement of wall thickness and/or cross section area of fiber. Therefore the internal fibrillation possibly can be described as the indices indicating the change of wall thickness and/or cross section area.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2003

This study was carried out to investigate the effect of internal fibrillation on the pulp and paper properties. The internal fibrillation was introduced into the SwBKP and recycled SwBKP by the mechanical treatment with Hobart mixer. WRV and physical properties of SwBKP were improved by the internal fibrillation. However the mechanical treatment of recycled SwBKP resulted in the decrease of strength properties of paper except for the tear index, although it was observed that WRV was somewhat increased by the mechanical treatment. The decrease of strength properties of recycled SwBKP might be caused by the hornification of fiber and the decrease of fiber strength.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.199-216
• /
• 2017

Purpose: This study reviewed the major nondestructive measurement techniques used to assess internal properties of agricultural materials that significantly influence the quality, safety, and value of the products in markets. Methods: Imaging technologies are powerful nondestructive analytical tools that possess specific advantages in revealing the internal properties of products. Results: This review was exploring the application of various imaging techniques, specifically, hyperspectral imaging (HSI), magnetic resonance imaging (MRI), soft X-ray, X-ray computed tomography (XRI-CT), thermal imaging (TI), and ultrasound imaging (UI), to investigate the internal properties of agricultural commodities. Conclusions: The basic instruments used in these techniques are discussed in the initial part of the review. In the context of an investigation of the internal properties of agricultural products, including crops, fruits, vegetables, poultry, meat, fish, and seeds, various extant studies are examined to understand the potential of these imaging technologies. Future trends for these imaging techniques are also presented.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.89-100
• /
• 1998

The study was carried to investigate the change of internal stress and physical properties of paper by the mutiplying of paper structuring that is an useful means to maximize the performance and use of the fiber raw material. The effects of recycled fiber on the physical properties of multiplied paper also were studied. The beating increased the internal stress of single layered paper, while filler loading decreased the internal stress. Multiplying the structure of paper decreased the internal stress and the most of physical properties except for tear index. It was found that the properties of paper could be changed by the pulp type, beating and the combination of raw materials. The introduction of filler in the middle and/or outer layer could improved the internal stress, tensile index, tear index and burst index. The addition of recycled fiber increased the opacity and stiffness of paper in both single layered and multiplied paper. Multiplying the structure of paper improved the air permeability and stiffness, while decreased burst index.

• Journal of Korean Society for Quality Management
• /
• v.34 no.2
• /
• pp.77-97
• /
• 2006

Internal marketing has been suggested as the approach for service organizations to be service-and customer-oriented; and the issues of internal service quality has been one of topics widely discussed in the internal marketing literature. While previous studies have attempted to develop the instrument assessing the internal service quality, ISQB(internal service Quality battery) developed by Kang et al.(2002), compared to other instruments have received some attention given its rigorous approach to measure the internal service quality. However, it has been noted that the validity of ISQB does not appear to be thoroughly examined while the reliability of the instrument seems to be secured. The current study attempts to readdress the psychometric properties of ISQB through the replication of the instrument. The empirical testing including confirmatory factor analysis and correlational analyses show that the instrument is reliable and valid in terms of its discriminant and nomological validity.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.6-12
• /
• 2005

Fiber surface morphologies and associated internal structures are closely related to its properties. Unlike other fibers including cotton, bast fibers possess transverse nodes and fissures in cross-sectional and longitudinal directions. Their morphologies and associated internal structures were anatomically examined under the scanning electron microscope. The results showed that the morphologies of the nodes and the fissures of bast fibers varied depending on the construction of the inner fibril cellular layers. The transverse nodes and fissures were formed by the folding and spiralling of the cellular layers during plant growth. The dimensions of nodes and fissures were determined by the dislocations of the cellular layers. There were also many longitudinal fissures in bast fibers. Some deep longitudinal fissures even opened the fiber lumen for a short way along the fiber. In addition, the lumen channel of the bast fibers could be disturbed or disrupted by the nodes and the spi­rals of the internal cellular layers. The existence of the transverse nodes and fissures in the bast fibers could degrade the fiber mechanical properties, whereas the longitudinal fissures may contribute to the very rapid moisture absorption and desorption.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.12
• /
• pp.836-842
• /
• 2011

It has been shown that the air-conditioning system with slab cooling storage is effective in cutting peak load and utilizing nighttime electric power. The stochastic properties of internal heat generation which has great influence on the cooling load are examined in this paper. Based on the measured cooling load and electric power consumption in an office building with slab cooling storage, stochastic time series models to simulate these random processes are investigated. Furthermore, a calculated result by an optimal control method of thermal analysis taking into account the internal heat is compared with the measured cooling load.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.161-165
• /
• 2012

The electrical properties of pig internal organs including lung, liver, heart, kidney, blood, stomach, and small intestine are measured using an open-ended coaxial probe and an improved virtual transmission-line model. The measured complex permittivities of the pig organs are compared with the given values of the corresponding human organs. A similarity between these values is confirmed. For organs such as lung, liver, heart, and kidney that have regular texture and contents, the complex permittivities are almost identical to those of the corresponding human organs. The complex permittivities of human and pig blood are also very close in value. However, relatively large deviations are observed for the cases of stomach and small intestine because the internal contents of these organs significantly affect the measured electrical properties.

• Korean Journal of Acupuncture
• /
• v.31 no.4
• /
• pp.208-217
• /
• 2014

Objectives and Methods : This study is to understand the properties and functions of twelve meridians. It aims to understand the meaning of the meridian names, and to study the properties of the six qi and the method of movement of the meridians by analyzing the six qi of the three yin and three yang from a meteorological perspective. The functions of twelve meridians based on the relationship between the operation of the internal organs and the meridians are then examined. Results and Conclusions : (1) The three yin and three yang includes the properties of six qi at the meridians. (2) The fundamental qi at reverting yin meridian lesser yin meridian and greater yin meridian has the properties of wind, heat and dampness, respectively, which are yang qi, while the fundamental qi at lesser yang meridian, yang brightness meridian and greater yang meridian has the properties of ministerial fire, dryness and cold, respectively, which are yin qi. (3) In the circulation of meridian qi, yang qi ascends at yin meridians while yin qi descends at yang meridians. (4) Three yin meridians belonging to the viscera help the function of intestines, which saves essence qi and then makes it go upward, while three yang meridians belonging to the bowels help the function of converting foodstuff and making it go downward. (5) In the human body, the internal organs play the primary role, and the meridians serve as helpers of the functioning of the internal organs by controlling the six qi.