• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.113-118
• /
• 2007

In this paper, a new method is proposed for robust proportional- integral - derivative (PID) control that is to ensure specified phase margin and iso - damping property using reduction model. This method is based on the second order plus dead time(SOPDT) reduction model of the high order model. Reduction model used to ensure iso-damping property in the feature frequency. Simulation results gives proof of effectiveness of proposed method.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2011

Six models of operator seat supplied to local tractor manufacturers were tested in the laboratory in accordance with ISO 5007 and 78/764/EEC. No models out of the six met the allowable damping and transmissibility performance criteria of both ISO 5007 and 78/764/EEC. From the ISO criterion standpoint, one model failed in damping performance and 4 models in isolation performance. From the 78/764/EEC criterion standpoint, 4 models failed in damping performance and 4 models in isolation performance. However none of them failed in all of the criteria, either. Each model met the one acceptance criterion but failed in another. This indicated that operator seat must be improved to meet the current ISO 5007 or 78/764/EEC and the exposure limit value that will be enforced in EU tractor market from 2014 by EU Directive 2002/44 EC.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.19-26
• /
• 2016

Floor damping materials used in floating floor system to diminish the floor noise have been made with low density and dynamic stiffness. Owing to this low density and dynamic stiffness, the deflection in these materials under long-term loading and cracking of the floor finishing mortar in the floating floor system may occur. This paper presents the results of long-term loading effects on the deflection of different types of floor damping materials. The experimental program involved the long-term loading tests for 490 days loading period on sixteen specimens. Specimens were classified as DM1(Damping Materials) to DM8, depending upon the four main parameters; types, bottom shapes and densities of floor damping materials and amount of loading. Results indicated that the long-term deflection of all specimens of damping materials remained unchanged after 200 days at all loading amounts, except the specimens made up of Polystrene, in which long-term deflection remained unchanged after 160 days at 250 N load and 100 days 500 N load. In this paper, two types of correlation expressions were shown in the deflection range prior to the range where deflection remained constant; two analyses by ISO 20392 and linear regression. In comparison of two analyses and experimental results on the difference of deflection of 16 specimens, the difference of deflection was below 0.4 mm in those analyses in case of that total deflection was below 10 mm. Restrictively, it was judged that the analysis for the deflection of specimens made up of Polystrene is more appropriate using ISO 20392.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.3
• /
• pp.11-20
• /
• 2008

In this paper, the characteristics of low hardness high damping rubber bearings(HDRB) were studied through various prototype tests. The low hardness HDRB were tested to evaluate vertical stiffness, shear stiffness, equivalent damping ratio, various dependencies of shear properties, ultimate shear properties and other factors. The prototype test was performed according to the specifications of ISO 22762-1, and evaluated according to the specifications of ISO 22762-3. The results of the prototype test showed that shear strain and temperature were the factors that most greatly influenced shear stiffness, and that compressive stress was the factor that most greatly influenced the equivalent damping ratio. The frequency dependence test of shear properties showed that two general tendencies of frequency dependence could be observed. At frequencies over 0.1Hz, the changes in shear properties were small. However, at frequencies under 0.1Hz, the changes in shear properties rapidly decreased. The creep test and the ultimate shear test were also performed, and both of them satisfied the requirements of ISO 22762-3.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.584-589
• /
• 2001

This paper presents the dynamic parameter design optimization of a suspension seat system using the genetic algorithm. At first, an equivalent 1-D.O.F. mass-spring-damper model of a suspension seat system was constructed for the purpose of its vibration analysis. Vertical vibration response and transmissibility of the equivalent model due to base excitations, which are defined in the ISO's seat vibration test codes, were computed. Furthermore, seat vibration test, that is ISO's damping test, was carried out in order to investigate the validity of the equivalent suspension seat model. Both analytical and experimental results showed good agreement each other. For the design optimization, the acceleration transmissibility of the suspension seat model was adopted as an object function. A simple genetic algorithm was used to search the optimum values of the design variables, suspension stiffness and damping coefficient. Finally, vibration ride performance test results showed that the optimum suspension parameters gives the lowest vibration transmissibility. Accordingly the genetic algorithm and the equivalent suspension seat modelling can be successfully adopted in the vibration ride quality optimization of a suspension seat system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.852-860
• /
• 2004

There are many standard methods for measuring vibration damping properties of the beam type material. Among them, three standards ASTM E 756, ISO 6721 and JIS G 0602, are compared. Loss factor and Young's modulus of the steel beam are evaluated by using five different methods and their results are compared. Logarithmic decay method and half-power bandwidth method are used to calculate the loss factor. It was observed that Young’s modulus is agree well, but loss factors are different from test to test. So the same test method must be applied to measure damping properties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.547-557
• /
• 2020

In this study, damping control devices were applied to the suspension system of a capsule train, and the effects were investigated to improve the ride comfort. The superconductor electrodynamic suspension (SC-EDS) method is used for the capsule train levitation. This method has advantages such as no gap control and a large gap. However, the SC-EDS method has disadvantages such as large gap variation and small damping characteristics against outer vibration, which causes degradation of the ride comfort. In this study, the damping control devices in the primary and secondary suspension were considered to improve the ride comfort in the capsule train. Damping control devices in the primary and secondary suspension can reduce the vibration transmission from outer disturbances to the bogie and from the bogie to the car body, respectively. Simulations for dynamic characteristics analyses were conducted based on the capsule train dynamic model to investigate the effects of the damping control devices on the ride comfort. As a result, it was confirmed that the ride comfort requirements according to the ISO standard can be satisfied by applying the damping control in the capsule train suspension.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.213-218
• /
• 2005

It is well known that the loss factor and Young's modulus are fundamental mechanical properties of materials. Recently, the use of complex plastics is increasing for vibration proof. In this study, we evaluated two mechanical values of polycarbonate and acrylonitrile butadiene styrene by using two different standard test methods of ASTM E 756 and ISO 6721. Because damping properties of material generally depend on temperature, test specimen‘s temperature were controlled in the temperature range between - $10^{\circ}C\;and\;60^{\circ}C$. The results shown that the loss factor of polycarbonate gradually increased as increasing temperature, while the Young's modulus decreased. However, the loss factor and the Young's modulus of acrylonitrile butadiene styrene are varied somewhat at $60^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.5
• /
• pp.1-10
• /
• 2007

In this paper, we proposed development of improved model reduction and design of common controller using reduction model. The Algorithm of improved model reduction considered the transient response and the steady-state response in response curve. The generalized controller is designed not only to ensure specified phase margin and iso-damping property also optimized smith-predictor controller about real model using reduction model. Simulation examples are given to show the better performance of the proposed method than convention methods.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.510-516
• /
• 2007

The efficiency of magnetic compass direction sensor and magnetic compass by the laboratory experiment for the apparatus of generating artificial magnetic force and the onboard experiment on the fishing boat of coastal pot at the outside of Pusan Namhang were investigated. The results showed that the bearing angle of magnetic compass direction sensor was coincided with that of magnetic compass. However, the performance of magnetic compasses was unsuitable under the ISO rule by the characteristic experiment of damping curve. Therefore, the use of autopilot system using magnetic compass direction sensor which is based on the magnetic compass needs the sufficient notice.