• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1006-1025
• /
• 2012

Improving the quality of service in IP networks is a major challenge for real-time voice communications. In particular, packet arrival-delay variation, so-called "jitter," is one of the main factors that degrade the quality of voice in mobile devices with the voice-over Internet protocol (VoIP). To resolve this issue, a receiver-based enhanced timing recovery algorithm combined with active jitter estimation is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. Extensive simulations have shown that the proposed algorithm delivers high voice quality by pursuing an optimal trade-off between average buffering delay and packet loss rate.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.93-99
• /
• 2011

This paper proposes a novel network jitter estimation algorithm for robust VoIP communication system. The proposed method computes the current network environment mode using the differences of arrival time and generation time from sequential received packets. According to the current network environment mode, the jitter variance weights is adjusted to minimize the error for estimating the network jitter. The jitter average and variance are calculated by the autoregressive estimated algorithm, and then the network jitter is estimated by applying the jitter variance weights.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.133-138
• /
• 2014

Packet arrival-delay variation, so-called 'jitter' is one of the main factors that degrade the quality of voice in mobile devices at the Voice over Internet Protocol (VoIP). To resolve this issue, a playout scheduling based on adaptive jitter estimation for enhancing VoIP speech quality is proposed. The proposed algorithm copes with the effect of transmission jitter by expanding or compressing each packet according to the predicted network delay and variations. Additionally, the active network jitter estimation incorporates rapid detection of delay spikes and reacts to changes in network conditions. The experimental results have shown that the proposed algorithm delivers high voice quality in unstable network environment.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.722-737
• /
• 2011

In this paper, we propose an estimation of network jitter that occurs when transmitting TCP packets containing MPEG-2 TS in progressive streaming service over wired or wireless Internet networks. Based on the estimated network jitter size, we can calculate required de-jitter buffering time to absorb the network jitter at the receiver side. For this purpose, by exploiting the PCR timestamp existing in the TS packet header, we create a new timestamp information that is marked in the optional field of TCP packet header to estimate the network jitter. By using the proposed de-jitter buffering scheme, it is possible to employ the conventional T-STD buffer model without any modification in the progressive streaming service over IP networks. The proposed method can be applicable to the recently developed international standard, MPEG DASH (dynamic adaptive streaming over HTTP) technology.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.182-191
• /
• 2004

In this paper, performances of different ultra-wideband (UWB) modulation schemes in the presence of timing jitter are evaluated and compared. Static and Rayleigh fading channels are considered. For fading channels, Oat and dispersive channels are assumed. First, bit error rate (BER) performances for each case are derived for a fixed value of timing jitter. Later, a uniform distribution of jitter is assumed to evaluate the performance of the system, and the theoretical results are verified by computer simulations. Finger estimation error is treated as timing jitter and an appropriate model is generated. Furthermore, a worst case distribution that provides an upper bound on the system performance is presented and compared with other distributions. Effects of timing jitter on systems employing different pulse shapes are analyzed to show the dependency of UWB performance on pulse shape. Although our analysis assumes uniform timing jitter, our framework can be used to evaluate the BER performance for any given probability distribution function of the jitter.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.237-242
• /
• 2022

Acquiring high-quality images in control and measurement systems is one of the important factors. Among image acquisition technologies, SFF (Shape from Focus) is a technology for recovering a 3D shape by acquiring 2D images with different focus levels by moving an object at a predetermined step size along the optical axis. For SFF, when an object is moved at a constant step size, mechanical vibration, referred as jitter noise, occurs in each step along the optical axis. In this paper, a new state estimation filter is designed and applied for reducing the jitter noise. For the application of the proposed method, the jitter noise and focus curves are modeled as Gaussian function. Experimental results demonstrate the effectiveness of proposed method.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.275-281
• /
• 2006

A very simple and efficient scheme for jitter reduction is proposed for a carrier frequency recovery loop using phase differential frequency estimation, which estimates the current frequency offset based on the difference of the average phases of two successive intervals. Analytical and numerical results presented in this paper show that by simply overlapping the observation intervals by half for frequency offset estimations, both the steady-state and transient performances can be improved. The proposed scheme does not require any additional hardware circuitry, but results in improved performance even with reduced complexity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.877-879
• /
• 2011

Bowel sounds (BS) are produced by the movement of the intestinal contents in the lumen of the gastro-intestinal tract during peristalsis and thus, it can be used clinically as useful indicators of bowel motility. We devised an estimation algorithm of bowel motility based on the regression modeling of the jitter and shimmer of BS signals measured by auscultation. Ten healthy males ($23.5\pm2.1$ years) were examined. Consequently, the correlation coefficient, coefficient of determination and standard error between the colon transit times (CTT) measured by a conventional radiograph and the values estimated by our algorithm were 0.98, 0.96 and 2.86, respectively. Also, through k-fold cross validation, the average value of the absolute differences between them was $5.0\pm2.5$ hours. This method could be used as a complementary tool for the non-invasive measurement of bowel motility.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.512-517
• /
• 2018

Improving voice quality is a major concern in telecommunications. In this paper, we propose a robust speech quality enhancement against background noise and packet loss at VoIP (Voice-over-IP) receiver. The proposed method combines network jitter estimation based on hybrid Markov chain, adaptive playout scheduling using the estimated jitter, and speech enhancement based on restoration of amplitude and phase to enhance the quality of the speech signal arriving at the VoIP receiver over IP network. The experimental results show that the proposed method removes the background noise added to the speech signal before encoding at the sender side and provides the enhanced speech quality in an unstable network environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.429-438
• /
• 2004

In this paper, a decision-feedback coherent code tracking loop is designed for WCDMA systems and its performance is analyzed in terms of jitter variance considering the effect of phase and symbol estimation errors for both AWGN and fading environments. An analytical closed-form formula for jitter variance is Int derived for AWGN environments as a function of a pulse-shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth while involving the phase estimation error and bit error rate, and the upper bound of jitter variance is derived for fading environments. Finally a second-order coherent code tracking loop is designed with the DPCH frame format #13 of the WCDHA forward link selected as a target system, and its performance is evaluated by the closed-form formula and compared with the simulation results for both AWGN and Rayleigh fading environments.