• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.763-766
• /
• 2002

A BEM is highly efficient method in the sense of economic computation. However, boundary integration is not easy for the complex and moving surface e.g. in a rotating blade. Thus, Kirchhoff surface is designed in an effort to overcome the difficulty resulting from complex boundary conditions. A Kirchhoff surface is a fictitious surface which envelopes acoustic sources of main concern. Acoustic sources may be distributed on each Kirchhoff surface element depending on its acoustic characteristics. In this study, an axial fan is assumed to have loading noise as a dominant source. Dipole sources can be computed based on the FW-H equation. Acoustic field is then computed by changing Kirchhoff surface on which near-field is implemented, to analyze the effect of Kirchhoff surface on it.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.772-777
• /
• 2002

A BEM is highly efficient method in the sense of economic computation. However, boundary integration is not easy for the complex and moving surface e.g. in a rotating blade. Thus, Kirchhoff surface is designed in an effort to overcome the difficulty resulting from complex boundary conditions. A Kirchhoff surface is a fictitious surface which envelopes acoustic sources of main concern. Acoustic sources may be distributed on each Kirchhoff surface element depending on its acoustic characteristics. In this study, an axial fan is assumed to have loading noise as a dominant source. Dipole sources can be computed based on the FW-H equation. Acoustic field is then computed by changing Kirchhoff surfaces on which near-field is implemented, to analyze the effect of Kirchhoff surface on it.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.701-713
• /
• 2003

The BEM is a highly efficient method in the sense of economical computation. However, boundary integration is not easy for the complex geometry and moving surface, e.g. a rotating blade. Thus, Kirchhoff surface is designed in an effort to overcome the difficulty resulting from complex boundary conditions. A Kirchhoff surface is a fictitious surface which envelopes acoustic sources of main concern. Acoustic sources may be distributed on each Kirchhoff surface element according to their acoustic characteristics. In this study, an axial fan is assumed to have unsteady loading noise as a dominant source. Dipole sources can be modeled to solve the FW-H equation. Acoustic field is then computed by determining Kirchhoff surface on which near-field is implemented, to analyze the effect of Kirchhoff surface on it. The optimal shape and the location of Kirchhoff surface are discussed by comparing with experimental data acquired in an anechoic chamber.

• 소음진동
• /
• 제6권5호
• /
• pp.607-616
• /
• 1996

A combined computational fluid dynamics(CFD)-Kirchhoff method is presented for predicting high-speed impulsive noise generated by a hovering blade. Two types of Kirchhoff integral formula are used; one for the classical linear Kirchhoff formulation and the other for the nonlinear Kirchhoff formulation. An Euler finite difference solver is solved first to obtain the flow field close to the blade, and then this flow field is used as an input to a Kirchhoff formulation to predict the acoustic far-field. These formulas are used at Mach numbers of 0.90 and 0.95 to investigate the effectiveness of the linear and nonlinear Kirchhoff formulas for delocalized flow. During these calculiations, the retarded time equation is also carefully examined, in particular, for the cases of the control surface located outside of the sonic cylinder, where multiple roots are obtained. Predicted results of acoustic far-field pressure with the linear Kirchhoff formulation agree well with experimental data when the control surface is at the certain location(R=1.46), but the correlation is getting worse before or after this specific location of the control surface due to the delocalized nonlinear aerodynamic flow field. Calculations based on the nonlinear Kirchhoff equation using a linear sonic cylinder as a control surface show a reasonable agreement with experimental data in negative amplitudes for both tip Mach numbers of 0.90 and 0.95, except some computational integration problems over a shock. This concliudes that a nonlinear formulation is necessary if the control surface is close to the blade and the flow is delocalized.

• 한국음향학회지
• /
• 제28권3호
• /
• pp.174-186
• /
• 2009

경계면이 존재하는 해양에서의 수중 음파 전달 모델링 시 일반적으로 평평한 경계면을 가정하고 Rayleigh가 제안했던 반사계수를 이용해 반사파를 계산할 수 있다. 하지만 해수면이나 해저면과 같은 실제 해양의 경계면은 불규칙적인 거칠기를 가진다. 이러한 경계면에서의 반사 손실은 실험식이나 산란 이론에 기반한 간섭 반사 계수를 계산하여 구할 수 있다. 본 논문에서는 섭동 이론, Kirchhoff 근사법, 작은 가지 근사법과 같은 산란 이론을 이용하여 유체-유체 경계면에 대한 간섭 반사 계수를 각각 유도한다. 이를 이용하여 임의의 거칠기를 가지는 해수면과 해저면에 대한 각 산란 이론의 간섭 반사계수를 계산하며, 이 결과를 Rayleigh 반사 계수와 비교하여 경계면의 거칠기에 따른 반사 손실을 분석한다. 또한, 섭동 이론과 Kirchhoff 근사법의 결과를 일반적으로 적용 범위가 넓은 작은 기울기 근사법의 결과와 비교하여 각 이론의 유효범위에 대해 고찰한다.

• 한국음향학회지
• /
• 제20권4호
• /
• pp.81-86
• /
• 2001

126-kHz양상태 해수면 음파산란 측정을 강원도 삼척시 연안에서 수행하였다. 수평입사각을38％, 52％로 고정시킨 상태에서 트랜스듀서와 청음기의 거리를 변화시키면서 산란각의 변화에 따른 전방산란 신호의 변화를 관찰하였다. 해저면 산란신호와는 달리 해수면 산란신호는 해수면 유동성에 의해서 도달시간 변이와 진폭의 변이를 나타내었으며 신호간의 상관관계도 불규칙적인 경향을 나타내었다. 전방산란강도를 계산하여 Kirchhoff approximation (KA)과 small slope approximation (SSA)을 비교한 결과 두 모델 모두 실측치와 잘 일치하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1062-1073
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. In developing a TS equation, it is assumed that the radiated pressure is known and the re-radiated intensity is unknown. This research provides a TS equation for polygonal plates, which is applicable to near field acoustics. In this research, Helmholtz-Kirchhoff formula is used as the primary equation for solving the re-radiated pressure field; the primary equation contains a surface (double) integral representation. The double integral representation can be reduced to a closed form, which involves only a line (single) integral representation of the boundary of the surface area by applying Stoke's theorem. Use of such line integral representations can reduce the cost of numerical calculation. Also Kirchhoff approximation is used to solve the surface values such as pressure and particle velocity. Finally, a generalized definition of Sonar Cross Section (SCS) that is applicable to near field is suggested. The TS equation for polygonal plates in near field is developed using the three prescribed statements; the redection to line integral representation, Kirchhoff approximation and a generalized definition of SCS. The equation developed in this research is applicable to near field, and therefore, no approximations are allowed except the Kirchhoff approximation. However, examinations with various types of models for reliability show that the equation has good performance in its applications. To analyze a general shape of model, a submarine type model was selected and successfully analyzed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.89-93
• /
• 2004

To numerically construct the sound fields by a plenum fan mostly found in Air-Handling Unit (AHU), the Kirchhoff-BEM approach was applied to the near-field data of a turbo fan. The scattering effects were found to be significant by the plenum box structure for high-frequency components of source. The directivity petterns and sound pressure levels were also dependent upon the helmholts number which must be considered of the design stage for sound reduction program.

• 지구물리와물리탐사
• /
• 제1권1호
• /
• pp.8-18
• /
• 1998

키르히호프 주시 쌍곡선은 탄성파 탐사에서 반사파 자료를 구조보정 하는데 널리 쓰여져 왔다. 그러나 이는 중합전 혹은 중합후 구조보정을 위한 적용에 있어 그 수학적인 기반이 그다지 명확하게 이해되어 오지 않아왔다. Exploding reflector 모델을 생각할 때 지하 산란체로부터 지표 수신기까지의 주시는 지하 산란체 위치에 송신원을 둔 경우 Green함수를 이용한 주시와 동일하다. 따라서 송신원에서 exploding reflector, 또 여기서 수신기까지의 주시의 합은 관측자료에 속도 및 밀도에 대한 편미분을 취함으로써 얻어지는 편미분 파동장의 주시와 개념적으로 일치한다. 키르히호프의 주시 쌍곡선을 따라 반사파 탄성파자료의 합은 편미분장과 관측된 자료의 내적과 동일한 것으로 간주될 수 있다. 또한 굴절 주시 직선을 이용한 굴절자료의 중합은 편미분장의 초동과 현장자료의 내적과 개념적으로 같음을 알 수 있다. 지하의 구조내의 속도나 밀도에 대한 편미분장의 관점에서 보면 굴절파자료에 대해서는 직선에 대한 중합, 반사파자료에 대해서는 키르히호프 쌍곡선으로 지하의 구조를 영상화 할 수 있는 연산자임을 확인하였다. 이러한 타당성 검증은 일반적인 키르히호프 구조보정에 대한 기본 이론을 구성할 수 있었고 또한굴절 주시 직선을 굴절파자료의 영상화에 있어서 연산자의 기본 지식을 확보할 수 있었다.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.528-533
• /
• 2005

A mono-static high frequency acoustic target strength analysis scheme was developed for underwater targets, based on the far-field Kirchhoff approximation. Au adaptive triangular beam method and a concept of virtual surface were adopted for considering the effect of hidden surfaces and multiple reflections of an underwater target, respectively. A test of a simple target showed that the suggested hidden surface removal scheme is valid. Then some numerical analyses, for several underwater targets, were carried out; (1) for several simple underwater targets, like sphere, square plate, cylinder, trihedral corner reflector, and (2) for a generic submarine model, The former was exactly coincident with the theoretical results including beam patterns versus azimuth angles, and the latter suggested that multiple reflections have to be considered to estimate more accurate target strength of underwater targets.