• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.161-166
• /
• 2013

Thermal degradation behavior of chlorine cure-site ACM and carboxylic cure-site ACM rubbers was studied by non-isothermal TGA thermal analysis. Carboxylic cure-site ACM rubber exhibited comparatively more thermally stable than chlorine cure-site ACM, showing higher peak temperature, at which maximum reaction rate occurred. Activation energies from Kissinger method were calculated as 118.6 kJ/mol for the chlorine cure-site ACM and 105.5 kJ/mol for the carboxylic cure-site ACM, showing similar values from Flynn-Wall-Ozawa analysis over the conversion range of 0.1~0.2. From the analysis of the reaction order change, both samples seemed thermally decomposed through the multiple reaction mechanism as is the common rubber materials.

• Fire Science and Engineering
• /
• v.18 no.3
• /
• pp.45-50
• /
• 2004

Thermal degradation of PVC which used for insulator of 600V vinyl insulated wire has been studied by thermo gravimetry analysis and accelerated thermal aging test. The activation energy using thermo gravimetry analysis was determined by the kinetic methods, such as Kissinger and Flynn-Wall-Ozawa. The activation energy was determined to from 89.29 kJ/mol to 111.39 kJ/mol in 600V PVC insulated wire and from 97.80 kJ/mol to 119.25 kJ/mol in 600v heat-resistant PVC insulated wire. And also, the activation energy through a long-term thermal aging test was calculated by using Arrhenius equation In the low temperature of 8$0^{\circ}C$, 9$0^{\circ}C$, 10$0^{\circ}C$. The results showed that 600V PVC insulated wire was 92.16 kJ/mol, and 600v heat-resistant PVC insulated wire was 97.52 kJ/mol. Consequently, the activation energy of 600V heat-resistant PVC insulated wire is larger than 600V PVC insulated wire. Therefore, it can be predicted that 600V heat-resistant PVC insulated wire has a long-term stability relatively.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.326-333
• /
• 2003

Even though many studies have been reported about rubber vulcanization, it is still remained difficult to find a quantitative relationship between the final states of vulcanized rubber and initial formulation or processing conditions. Dynamic differential scanning calorimetry (DSC) method is known as a comparatively easy method to research for the rubber vulcanization in both experimental and analysis. In the present research, a study on the vulcanization reaction of NR/CB composites modified by isoprene(IR) and chloroprene(CR) rubbers is carried out using dynamic DSC method. Thermograms with several different heating rates were obtained and analyzed using the Kissinger method. Analysis showed that the vulcanization reaction was progressed through the first order reaction mechanism. In addition, the reaction temperature was severely influenced by the kinds or rubber modifiers, in this case, more influenced by CR than by IR. Those effects were clearly verified in the values of activation energy. Kinds of carbon blacks, however, could hardly influence on the reaction mechanism.

• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.281-288
• /
• 2016

After analyzing of heating value of four kinds of RDF, the RDF-D has the highest heating value, was chosen to be mixed with carbonized sludge by different ratio. The 85%:15% ratio, which has the highest efficiency, was analyzed with thermogravimetric and pyrolysis kinetics. Applying of Kissinger method, activation energy was obtained from slope which is calculated from relation of ln(${\beta}/T^2{_m}$) and $1/T_m$. The kinetic parameters obtained from Kissinger method were 46.06 kJ/mol of RDF, 55.99 kJ/mol of carbonized sludge and 40.68 kJ/mol of mixture of RDF and carbonized sludge. The mixture of RDF and carbonized sludge has the lowest activation energy and frequency factor, during thermal decomposition reaction it has the slowest reaction rate and needs the lowest energy. Although activation energy with pyrolysis of RDF was irregularly scattered, it showed that activation energy was stabilized by co-pyrolysis of RDF and additives(Carbonized Sludge).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1125-1129
• /
• 2008

Polypropylene (PP)/corn starch master batch(starch-MB) blends with different PP compositions of 90, 80, 70, and 60 wt% were prepared by melt compounding at $200^{\circ}C$, using lab scale Brabender mixer. The chemical structures, thermal properties and non-isothermal crystallization behavior of the PP/starch-MB blends were investigated by FT-infrared spectrometry (FT-IR), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The fabrication of the PP/starch-MB blend was confirmed by the existence of hydroxy group in FT-IR spectrum. There was no district change in melting temperature and melting enthalpy, and TGA curve indicates a decrease in degradation temperature with starch-MB content. The non-isothermal crystallization process was analyzed using by Avrami equation. The Avrami exponents were in the range of 2.71-3.97 for PP and 1.48-1.99 for PP/starch-MB blonds. The activation energies calculated by Kissinger method were 233 kJ/mol for PP, 484 kJ/mol for PP90, 541 kJ/mol for PP80, 553 kJ/mol for PP70, and 422 kJ/mol for PP60.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.904-909
• /
• 1994

Cure kinetics of DGEBA(diglycidyl ether of bisphenol A)/MDA(4,4'-methylene dianiline)/GN(glutaronitrile) system with and without HQ(hydroquinone) as a catalyst was studied by Kissinger equation and Fractional life method. The activation energy of the system with HQ was somewhat lower and the pre-exponential factor of that was higher by about 30% than those of the system without HQ. As 1.25phr of HQ was added, reaction rates increased about 1.8 times.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.475-478
• /
• 1999

The thermal properties of epoxy resin/siloxane for the electrical insulation were investigated by using dynamic DSC run method. As the heating rate increased, the peak temperature on dynamic DSC curve increased. From the linear relation on the Kissinger plot the curing reaction activation energy and pre-exponential factor could be obtained. The curing activation energy from the straight line of the Kissinger plot was 46.72 kJ/mol.

• Elastomers and Composites
• /
• v.39 no.4
• /
• pp.281-285
• /
• 2004

In this paper, the simple way to evaluate the value of the activation energy for the overall rate of free radical polymerization by using DSC thermograms was studied using free radical polymerization or butylacrylate as a model. Activation ehergies were determined at heating rates of 1, 2, 5, and $10^{\circ}C/min$ by applying the multiple scanning-rate methods of Kissinger, Osawa, and half-width methods as well as the single rate method of Barrett. The value of the overall activation energy measured was closely matched with the values calculated from individual data. This work also demonstrated that the use of the isoconversional method was a simple and effective way to estimate the activation energy for the overall free radical polymerization.

• Elastomers and Composites
• /
• v.42 no.1
• /
• pp.47-54
• /
• 2007

Reaction kinetics of polyurethane elastomers (PU) were studied using dynamic DSC and TGA for three PU samples of general purpose (Sample A), high temperature cross-likable CASE purpose with MOCA (Sample B), and RT cross-likable CASE purpose grade (Sample C). From DSC results, sample with MOCA(Sample B) showed lower shift of peak temperature, while showing broader thermograms than those of general purpose grade (Sample A). On the other hand, RT cross-linkable PU grade (Sample C) showed an interesting double mode reaction patterns, i.e., a lower temperature reaction at about $70\;^{\circ}C$, and a higher temperature reaction in the range of $140{\sim}170\;^{\circ}C$, indicating that it requires 2-step reaction process in order to complete the reaction. Once the cross-linking reaction completed, however, TGA results showed that all the samples would be considered to have similar chemical structures, showing similar decomposition processes. Sample C, especially, had showed decomposition properties of both Sample A and Sample B. Formation activation energies calculated from Kissinger method showed 10.39, 65.85, 36.52(Low $T_p$) and 18.21(High $T_p$) kcal/mol, while decomposition activation energies were 31.94, 30.84, 24.16 kcal/mol, respectively.

• Korean Journal of Materials Research
• /
• v.2 no.4
• /
• pp.257-262
• /
• 1992

The cure kinetics of a diglycidyl ether of bisphenol A (DGEBA) with 4, 4'-methylene dianiline (MDA) added succinonitrile was studied through the dynamic run method by applying the data to the Kissinger equation which analyses the effect of the heating rate on the temperature at maximum reaction rate using Differential Scanning Calorimetry (DSC) analyzer in the range of 3$0^{\circ}C$-35$0^{\circ}C$. In the DGEBA/MDA system with SN, the activation energy ($E_a$) and the pre-exponential factor (A) were calculated. From these results, the rate constants (k) were obtained according to the different SN contents.