• Journal of the Speleological Society of Korea
• /
• no.77
• /
• pp.21-30
• /
• 2007

Photo-lithography lies in the middle of the wafer fabrication process. It is often considered as the most critical step in the IC process. We use a mask in exposure steps of the photo-lithography. Typically, 20 to 25 different levels of masks are required to complete an IC device. That means, if a photo process can be developed with the use of only one photo mask, we can reduce more process cost. To satisfy this, we plan to develop an alternative photo mask. For this reason, we chose to use a LCD. We expect to develop a LCD panel that can be changed by electrical control. This is the main idea about the adjustive photo mask. The Photo mask made of LCD panel will replace the former one.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1114-1117
• /
• 2004

We investigated the liquid crystal (LC) alignment phenomena using hydrogenated amorphous carbon (a-C:H) thin films. For LC alignment, the surface of a-C:H thin films is treated with low energy ion beam. We investigated the relationship between the properties of a-C:H thin films and LC alignment phenomena.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1111-1113
• /
• 2004

n+ etching process is investigated in the fabrication of TFF-LCD using low resistance data line of Mo/Al/Mo. Problems of consumption of upper Mo layer and contamination of channel area are resolved. Either of HCl or $Cl_2$ can be selected as a main etchant gas, and either of $SF_6$ or $CF_4$ can be selected as an additive. Plasma treatment after n+ etching process can reduce the off-current high problem.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.395-398
• /
• 2004

We developed an a-Si TFT-LCD panel with integrated gate driver circuit using a standard 5-MASK process. To minimize the effect of the a-Si TFT current and LC's capacitance variation with temperature, we developed a new a-Si TFT circuit structure and minimized coupling capacitance by changing vertical architecture above gate driver circuit. Integration of gate driver circuit on glass substrate enables single chip and 3-side free panel structure in a-Si TFT-LCD of QVGA(240$^{\ast}$320) resolution. And using double ASG structure the dead space of TFT-LCD panel could be further decreased.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.1-7
• /
• 2006

A light guided plate coupled with the micro Fresnel lens array(MFTA) is designed to improve the efficiency of the LCD backlight unit. Blazed Frenel lens and binary multi-level Fresnel lens are adapted for the MFLA. This type of MFLA can replace the prism sheet and diffuser sheet which are used for the conventional type of the LCD backlight unit. The luminance and uniformity are calculated to verify the performance of the MFLA type LCD backlight unit.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.17-18
• /
• 2006

Flat Panel Displays (FPDs) have made a revolution in the display industry. TFT-LCD (Thin Film Transistor Liquid Crystal Display) has been the main player of FPD for last two decades. As the industry continuously develops the technology for better performance with lower cost is constantly demanded where several post LCD technologies are being developed. One of the prime candidates of post LCD technology is AMOLED (Active Matrix Organic Light Emitting Diode) that is considered to be an ideal FPD due to its extraordinary display performance and potentially low cost display structure. This technology has been accepted to small size display applications, such as cellular phone, PDA and PMP, etc. In this paper it is discussed that how this technology can be extended to large size display applications, such as TV. The technical issues and solutions of TFT backplane and color patterning of OLED materials are discussed and proposed

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.17-19
• /
• 2008

An advanced TFT-LCD structure was proposed to increase aperture ratio (AR). In this structure, metal layers formed below the data lines are used as light-blocking layers, achieving higher AR ratio than that of a conventional structure. Since average misalignment between the metal light-blocking layers and pixel electrodes is smaller than that of black matrixes on color filter glass, substantially less light-blocking areas are needed to achieve misalignment margin. The AR of the LCD panel fabricated by using proposed structure was enhanced by 18.7 % over that of the conventionally structured panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.681-684
• /
• 2008

Motion interpolation is adopted and has been spread widely into market since it is effective in reducing motion blur, which is considered as weak characteristic due to slow response time of liquid crystal and hold-type display. 120Hz driving using interpolated frames achieves better moving picture quality with less motion blur and less motion judder. However, errors in the interpolated frames can cause visual artifacts such as static text breakup, halos, and occlusions. This paper focuses on categorizing characteristics of visual artifacts and on reducing side-effects by using information from original frames in special cases.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.299-301
• /
• 2008

We suggest a new method to evaluate the anti-smudge performance of LCD panels. The anti-smudge performance is characterized by oleic acid contact angle. This method shows accurate and reproducible result and overcomes the difficulty of quantitative evaluation for the anti-smudge characteristic and low reliability in several proposed measurements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.235-238
• /
• 2008

We report the improvement in brightness through the optimization of the organic passivation process for fabricating a TFT substrate for LCD-TV panel. In conclusion, the optimization of organic passivation was accomplished with improving over $10\;cd/m^2$ in brightness than that of a conventional organic passivation process.