• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.9-12
• /
• 2008

For the large-sized and post-ultra definition TFT-LCD, improved drivability is prerequisite not only for the integration of driving circuit on glass but also for the chargeability of each pixel. In order to meet required drivability, currently adopted process architecture and materials are modified for the RC delay reduction, including the drastic increase of gate bus thickness and its related solution for step coverage. We present new process architecture and material selection for the next generation TFT-LCD devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.352-354
• /
• 2008

A 15.4" WXGA TFT-LCD, featuring integrated a-Si:H gate driver circuits and reduced data driver ICs, has been developed. To reduce number of data lines into 1/2 of conventional structure, the pixel array has been re-mapped with re-organized data signal. Unintended artificial effects such as flicker were removed by adopting the novel pixel array having a 'zigzag' map. To minimize the power consumption, a column inversion method was incorporated in the zigzag pixel array (Fig.1) without modifying the polarity map of conventional dot inversion method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.784-787
• /
• 2006

We have developed a RGB polymer dispersed liquid crystal film (RGB PDLC). To obtain the color display, color pigments are mixed in the prepolymer. We have presented an electro-optical performance of our cell and analyzed the electro optical properties for varying LC/ pre-polymer ratio and polymer type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.987-989
• /
• 2006

1.52" $130(RGB){\times}130$ full color PM OLED device with $70\;{\mu}m{\times}210\;{\mu}m$ of sub-pixel pitch was fabricated using shadow mask method for metal cathode deposition. Instead of conventional patterning process to form cathode separator via photolithography, regularly patterned shadow mask was applied to deposit metal cathode in this OLED display. Metal cathode was patterned via 2-step evaporation using shadow mask with shape of rectangular stripe and its alignment margin is $2.5\;{\mu}m$. Technical advantages of this method include reduction of process time according to skipping over photolithographic process for cathode separator and minimizing pixel shrinkage caused by PR cathode separator as well as improving lifetime of OLED device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.290-293
• /
• 2006

We designed the H-IPS that has similar aperture ratio to the AS-IPS with organic insulator. To improve the aperture ratio without organic insulator, we positioned the pixel electrode over the preceding gate on the base of the H-IPS structure, and minimized the width of pixel and common electrodes. Without the additional process, we could obtain the similar brightness with that of AS-IPS in 15inch SXGA+ Panel.

• Information Display
• /
• v.6 no.4
• /
• pp.11-21
• /
• 2005

평판 디스플레이 장치가 LCD-TV에 사용되는 경우 시야각 특성과 동화상 성능은 보다 중요한 성능이 된다. 전반적인 LCD의 화질 특성은 시야각 특성과 동화상 응답 속도를 제외한 모든 부문에서 경쟁 기술보다 우세하다. 이러한 디스플레이의 시야각 특성을 개선하기 위해 LCD업계에서는 IPS, MVA, PVA 등 시야각 특성이 개선된 광시야각 액정 Mode를 개발하여 사용하고 있지만 여전히 LCD는 자발광 디스플레이에 비하여 측면 시인성 측면으로 열세에 있었다. 최근에는 LCD의 측면 시인성을 획기적으로 개선 할 수 있는 기술이 개발되어 더 이상 LCD-TV 응용에서 문제가 되지 않을 수준이 되고 있다. 본 논문에서는 여러가지 광시야각 액정모드 LCD의 측면 시인성 향상 기술에 대한 개략적인 사항을 알아보고, 그 중 Super PVA 액정 기술의 기본원리와 동작 방법에 대하여 상세히 기술하기로 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1038-1040
• /
• 2005

Linear kink effect (LKE) induced mainly by selfheating on the reliability of divided channel poly-Si TFTs has been studied. The LKE was enhanced for compact designed structure to achieve narrow bezel, which was explained by the difference in heat dissipation capability, thus self-heating immunity in TFT.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1503-1506
• /
• 2005

This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.661-663
• /
• 2003

In this paper, production of TFT-LCD adopting Cu electrode, in spite of low resistivity, which was not commercially applied to TFT LCD products because of processibility, reliability problems etc. was mentioned. Based on the test result of etch and strip process of Cu electrode, the TFT device using Cu material shows the same characteristics as the conventional TFT devices. We describe the realization of a 20.1" UXGA model which was firstly applied to Cu electrode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.673-674
• /
• 2003

The reliability of TFT, crystallized by sequential lateral solidification (SLS) technology, has been studied High current damage is characterized by high gate bias (-20V) and drain bias (-10V). It is found that performance of SLS TFTs is enhanced by high current stress up to 300 sec of stress time for 20/8 (W/L) N-TFT. After that, TFT performance is degraded with the increase of the stress time. It is speculated from the experimental data that SLS TFTs initially contain a number of unstable defect states. Then, the defect states seem to be cured by high current stress.