• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.451-459
• /
• 2006

Color reproduction of small LCD display is quite different from that of standard CRT due to the difference of physical, electrical, and optical characteristics. In this paper, we propose a simple and practical method using gamma and CCT correction for improvement of color reproduction on a small LCD display. First, we investigate characteristics of a small LCD display such as brightness, uniformity, color temperature, white and black balance, and nonlinear gamma. And, we also analyze color reproduction region and CCT trajectory according to LCD's input levels. Finally, the optimum gamma and CCT compensation method using LUT is proposed, and our proposed method was realized at mobile phone without hardware modification. In the experimental results, the result image of proposed algorithm is more close to standard color.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.18-21
• /
• 2005

A new technology for reducing photolithography process from a four step to a three step process in the fabrication of TFT LCD is introduced. The core technology for 3-mask-TFT processes is the lift-off process [1], by which the PAS and PXL layers can be formed simultaneously. A different method of the lift-off process was developed in order to enhance the performance of efficiency with conventional positive and not negative PR which is the generally used in other lift-off process. In addition, the removal capacity of the ITO/PR in lift-off process was evaluated. The evaluation results showed that the new process can be run in conventional TFT production condition. In order to apply this new process in existing TFT process, several tests were conducted to ensure stability of the TFT process. It was found that the outgases from PR on the substrate in ITO sputtering chamber do not raise any problem, and the deposited ITO film beside the PR has conventional ITO qualities. Furthemore, the particles that were produced due to the ITO chips in PR strip bath could be reduced by the existing filtering system of stripper. With the development of total process and design of the structure for TFT using this technology, 3-mask-panels were achieved in TN and IPS modes, which showed the same display performances as those with the conventional 4mask process. The applicability and usefulness of the 3-mask process has already verified in the mass production line and in fact it currently being used for the production of some products.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.592-595
• /
• 2008

This paper presents development of automatic image quality register optimization system using mobile TFT-LCD (Thin Film Transistor-Liquid Crystal Display) driver IC and embedded software. It optimizes automatically gamma adjustment and voltage setting registers in mobile TFT-LCD driver IC to improve gamma correction error, adjusting time, flicker noise and contrast ratio. Developed algorithms and embedded software are generally applicable for most of the TFT-LCD modules. The proposed optimization system contains module-under-test (MUT, TFT-LCD module), control program, multimedia display tester for measuring luminance, flicker noise and contrast ratio, and control board for interface between PC and TFT-LCD module. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU.

• Journal of Information Display
• /
• v.11 no.2
• /
• pp.49-51
• /
• 2010

Nanoimprint lithography (NIL) using ultraviolet (UV) rays is a technique in which unconventional lithographic patterns are formed on a substrate by curing a suitable liquid resist in contact with a transparent patterned mold, then releasing the freshly patterned material. Here, various solutions are introduced to achieve sufficient overlay accuracy and to overcome the technical challenges in resist patterning via UV imprinting. Moreover, resist patterning of all the layers in TFT and of the BM layer in CF was carried out using UV imprinting lithography to come up with a 12.1-inch TFT-LCD panel with a resolution of $1280{\times}800$ lines (125 ppi).

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.63-70
• /
• 2005

We propose a method for evaluating the image quality of color liquid crystal display(LCD) monitors by using the polychromatic modulation transfer function(PMTF), which is calculated from the modulation transfer function(MTF) weighted by the overall color response of the system including the test LCD monitor. We confirm that experimental results using the PMTF agree well with simulated results of the PMTF of a color LCD monitor by using three bar targets with different amplitudes and three elementary colors such as red(R), green(G), and blue(B). As a results, we should choose the PMTF instead of the white color MTF or monochromatic MTF in order to evaluate correctly the image quality of color LCD monitors.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.239-248
• /
• 2019

Purpose: This study aims to enhance the resistance against sulfate attack compared to ordinary Portland cement (OPC) concrete by using liquid crystal display (LCD) as binder. Method: The fundamental properties including compressive strength and porosity of concrete replaced by LCD up to 15% at increments of 5% and in turn, the weight, volume, and strength loss of LCD-mixed concrete was analyzed. Results: For the concrete substituted by 5% of LCD, it showed the highest compressive strength at 28 days of curing, and particular at immersion of $Na_2SO_4$ solution, it was achieved the lowest loss of weight, volume and strength due to an decreased porosity at capillaries. In contrast, there is no distinct difference of the sulfate attack resistance between LCD-mixed concretes under exposure of $MgSO_4$ solution, excepted for OPC concrete. Conclusion: In this study, comparison of resistance to sulfate attack between LCD-mixed concretes, and it would be proposed the possibility of LCD usage as binder through long-term verification with extended replacement ratio and identification of changes of hydrates in the cement matrix.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.109-116
• /
• 2003

In this paper. we Propose an UXGA class LCD controller for controlling the LCD panel. The proposed controller supports the full screen display using GCD between input and output resolutions. The proposed LCD controller includes the motion detector based on median filter which can detect the motion of input image for the enhancement of a image quality. Also, it divides the motion into 3 stages such as still, semi-moving and moving, and uses the different interpolation algorithms according to the degree of motion. In order to evaluate the performance of the proposed interpolation algorithm, we use PSNR method and compare the conventional algorithm by using computer simulation. For the proposed motion detection algorithm, we use a visual verification and the estimation of pixel changes. The proposed LCD controller has been designed and verified by VHDL. It has been synthesized using Xilinx VirtexE FPGA.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.2
• /
• pp.73-83
• /
• 2015

This paper proposes a TFT-LCD defect blob detection algorithm using the sequential defect detection method. First, for every pixel, a defect possibility is determined by the intensity difference and the defect candidates are detected according to the sequential defect detection method. For detected candidate pixels, the defect probability that indicates a potential included in the defect according to the each step. By applying the morphological operation, blobs are comprised of the detected candidates and the defect blobs are detected using the defect possibility of blobs. The validity of the proposed method was demonstrated a simulated image and also then it was tested a real TFT-LCD image. By the experimental results, the proposed method is very effective in TFT-LCD detect detection.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.946-949
• /
• 2005

This paper deals with the algorithm development that inspects defects such as Bright Defect Dots, Dark Defect Dots, and Line Defect caused by the process of LCD(Liquid Crystal Display). While most of LCD production process is automated, the inspection of LCD panel and its appearance depends on manual process. So, the quality of the inspection is affected by the condition of worker. Especially, the more LCD size increases, the more the worker feels fatigued, which causes the probability of miss judgement. So, the automated inspection is required to manage the consistent quality of the product and reduce the production costs. In this paper, to solve these problems, we developed the imaging processing algorithm to inspect the defects in captured image of LCD. Experimental results reveal that we can recognize various types of defect of LCD with good accuracy and high speed.

• Korean Management Science Review
• /
• v.29 no.1
• /
• pp.33-56
• /
• 2012

Domestic LCD TV market is composed of two groups of products produced by major firms and small and medium enterprises. The major companies make the price relatively high, but the other makes lower in the same sizes. The model of the low price products does not make consumers choice when they choose LCD TV. This makes the questions of capability between difference price products. The reason above mentioned, the firms that include group of comparatively lower price, are worried about not increasing sale because of prejudice. This study is to find any interrelationship and evaluate the efficiency between the products using performance, exterior and brand power of product. In order to do this, a hybrid AHP/DEA evaluation model for comparison/valuation of LCD TV products is developed. The proposed process is; first, to derive hierarchy structure of LCD TV evaluation criteria using axiomatic design, second, to calculate the score of each LCD TV product through AHP analysis including weight calculation of evaluation criteria, and last, to evaluate the efficiency of LCD TV product by applying DEA by defining product scores as output and prices as input. It concludes that the high price products shows good efficiency, but there are some products with good exterior and brand power, not performance, also presenting good efficiency.