• KIEAE Journal
• /
• 제13권2호
• /
• pp.47-52
• /
• 2013

The problems of light pollution first became an issue in the 1970s when astronomers identified the degradation of the night sky due to the increase in lighting associated with development and growth. As more impacts to the environment by lighting have been identified, many attempts have been made for reducing light pollutions. To prevent light pollution and increase energy efficiency, Seoul Metropolitan Government(SMG) replaced metal halide road lighting to LED luminaire in four arterial highway in Seoul. The present study compared the lighting characteristics of metal halide and LED luminaire in terms of Korea Standard for road lighting(KS A 3701) and BUG rating from Illuminating Engineering Society of North America(IESNA). The results showed that LED luminaire increased road surface luminance up to 2 times in average compared to the metal halide environment. Also, LED luminaire reduced the glare value by 2 times and luminous flux over 50% than the metal halide luminaire. In comparison with the BUG ratings, LED luminaire rated 1 degree lower for the backlight ratings and 3-4 degrees lower for the uplight ratings. The measured values testified that the LED luminaire is effective for roadway lighting and light pollution reduction.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.778-784
• /
• 2013

In order to develop a LED luminaire for naval-submarines which can replace a conventional one with two-compact fluorescent lamp (CFL) of 18 W, we analyzed the electrical and optical performance of the conventional luminaire. A LED luminaire was fabricated as compact as possible based on the analyzed data. The weight of the prototype LED luminaire is 1.8 kg, reducing up to 58% of the conventional one. The use of LED package for the submarine luminaire could reduce the power consumption from 38 W to 14.5 W with the same optical performance. The reason is that the optical efficacy of the LED luminaire improved by 2.47 times as 61.9 lm/W, compared to 25.1 lm/W for the conventional one.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.25-34
• /
• 2017

Offshore plants should be managed at a high level of safety condition. Because the offshore plant has cramped space and has difficult access when a fire occurred, a fire can be critical to the plants. LED lighting can reduce the risk of fire by its lower energy consume suitable to intrinsic safety and lower heat radiation that can reduce the possibility of ignition. Also LED has a long lifetime. Though LED luminaire has various advantages for offshore plants, an international standard for the luminaire has not provided because it is new technology. Because there is no international and domestic standard specially provided for the LED luminaire, a guideline is required for developing the LED light and for the future establishment of an international standard. This study was conducted to develop the guideline for LED luminaire for offshore plants. Firstly, relevant standards were analyzed for the guideline. Then we found that there are editorial differences between international standards and domestic standards. So the guideline was developed based on international version and the differences between the domestic and international standard were provided to let Korean developers recognize the differences.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.23-30
• /
• 2009

LED조명장치는 자동차분야, 항공, 디스플레이, 전송장치 그리고 특수조명등의 응용장치로의 활용이 증가하고 있다. 일반적으로 고출력 RGB 멀티칩 LED는 표시용이나 경관조명용 또는 감성조명용으로 적용되고 백색 LED는 표시용 조명에서 최근 들어 일반조명용으로 적용되고 있으며, 고출력 백색 LED의 출시와 광효율의 증가는 이를 더욱 가속화하고 있다. 본 논문에서는 백색 LED와 RGB 멀티칩 LED 조명장치를 동일한 사양으로 제작하여 물리적, 전기적, 광학적 조명특성을 분석하여 향후 LED조명시스템의 제작에 정량적 데이터를 제공하고자 한다. 이를 위해 LED의 주요한 물리적 특성인 방열특성에 대한 성능분석, 전기적 특성의 분석을 위한 전력 및 드라이브 효율에 대한 성능분석을 수행하였고 조명특성을 위한 연색성, 배광특성, 광효율을 측정하였다. 백색 LED와 RGB 멀티칩 LED 조명장치를 활용한 응용장치의 적용방법을 확립하고 나아가 다양한 조명시스템에 LED 조명장치를 적용하는데 참고가 되는 기초 데이터를 제시하고자 한다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.134-137
• /
• 2010

An LED sensor luminaire for visual function improvement necessitates the control algorithm for light level adjustment and the appropriate lens design. The control algorithm adapts to surround lighting condition, and thus has the advantages of energy saving and glare reduction. The multi-cell lens design improves color temperature uniformity and spatial light distribution of the luminaire. Experimental and simulated results show that this approach contributes noticeably to energy saving and color temperature uniformity of the LED sensor luminaire.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.20-26
• /
• 2004

본 논문에서는 조명용 고휘도(HB, high brightness) 백색 LED(light emitting diode)램프의 배열 및 여러 가지 등기구 글로브(globe)의 형태에 따른 광도(luminous intensity)값과 기구효율(luminaire efficiency)을 컴퓨터 시뮬레이션으로 수행하여 비교분석 하였다. 즉, LED의 배열은 가로${\times}$세로(7개${\times}$7개)가 정사각형 형태로 49개를 배열하고, LED 간격은 LED의 발광면 중심부로부터 8.2[mm], 10.0[mm], 15.0[mm]로 각각 3가지로 하였으며, 등기구의 글로브는 LED발광면 중심부에서 30[mm], 50[mm] 떨어진 거리로 구분하였다. 또한 등기구 글로브가 없을 때와 있을때로 구분하여 있을 때에는 글로브 형태를 볼록 원형과 엠보(embossing)형태로 구분하고 엠보는 8.2[mm], 5.0[mm]의 크기에 따른 선택으로 시뮬레이션 27가지로 수행하여 등기구의 글로브 형태에 따른 광도 및 기구효율을 고찰해 봄으로써 앞으로 21세기 디지털조명이라고 일컫는 LED를 사용한 LED 광원(light source) 및 등기구 개발에 많은 도움이 되고자 하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.182-182
• /
• 2011

This paper dealt with a design guide of LED luminaire standard for naval vessels. Several standards such as Korean Industrial Standard (KS), Korea Defence Standard (KDS) and US Military Standard (MIL) were compared in terms of safety and performance of lighting fixtures. The electrical and optical characteristics of the FL fixtures were experimentally analyzed to acquire design rules for LED luminaires. Based on the study results, we proposed the concept of a LED luminaire standard.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.66-72
• /
• 2016

LED 조명 제어 시스템은 LED 조명의 효율적인 관리와 에너지 절감을 위하여 IT 기술과 LED 조명을 결합한 형태로 발전되고 있다. 따라서 본 논문에서는 Bluetooth 무선통신, 센서 기술 및 스마트폰을 이용하여 LED 등기구 상태 확인 및 제어할 수 있는 시스템을 제안하였다. 제안된 LED 조명 제어 회로는 퍼지 정전류 제어 회로에 온도센서, 조도센서 및 Bluetooth 모듈을 장착할 수 있도록 설계하였다. LED 방열판의 발열 온도 $70^{\circ}C$를 기준으로 LED 등기구 공급 전류를 최적화하여 LED 손상 방지 및 수명을 연장하고 LED 등기구 주위의 조도에 따라 자동으로 ON/OFF 되도록 하였다. 그리고 Bluetooth 무선통신과 안드로이드 기반의 어플을 개발하여 스마트폰으로 손쉽게 LED 등기구 상태 확인 및 디밍제어등 관리의 효율성을 높이고 에너지 절감 효과를 얻을 수 있도록 하였고, 실험을 통하여 개발된 LED 조명 제어 시스템이 정상적으로 동작함을 확인하였다.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.60-66
• /
• 2011

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1880-1885
• /
• 2016

This study aims to design a zonal lumen for parking garage LED lightings of a slim appearance and 20 W/2,000 lm capacity and to fabricate a lighting luminaire accordingly. The frame is of a one-dimensional bar type with a reverse V-shaped section, with LED chips arranged along both sides. To maximize the $60^{\circ}$ to $80^{\circ}$ zonal lumen, the geometric structure was designed with the apex of the reverse V-shaped section at $40^{\circ}$ and both sides at $70^{\circ}$. As for the LED light source, focusing lenses with narrower full-width half-maximum (FWHM) in luminous intensity were used. A ray-tracing simulation method was utilized for the zonal lumen simulation of the given structure. An actual hardware of luminaire based on the simulation results was fabricated and characterized. The suggested model is meant to develop LED lightings with a proper level of zonal lumen required in parking garages.