• Title/Summary/Keyword: LFTS

Search Result 19, Processing Time 0.029 seconds

Design and Testing of a Long Stroke Fast Tool Servo for Ultra-precision Free-form Machining (초정밀 자유곡면 가공용 long stroke fast tool servo의 설계 및 특성 평가)

  • Kim, Ho-Sang;Lee, Kwang-Il
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.26 no.2
    • /
    • pp.35-44
    • /
    • 2009
  • Long stroke Fast Tool Servo (LFTS) with maximum stroke of $432{\mu}m$ is designed, manufactured and tested for fabrication of optical free-form surfaces. The large amount of stroke in LFTS has been realized by utilizing the hinge and lever mechanisms which enable the displacement amplification ratio of 4.3. In this mechanism the peculiar shape was devised for maximizing the displacement of end tip in LFTS and special mechanical spring has been mounted to provide the sufficient preload to the piezoelectric actuator. Also, its longitudinal motion of tool tip can be measured by capacitive type displacement sensor and closed-loop controlled to overcome the nonlinear hysteresis. In order to verify the static and dynamic characteristics of designed LFTS, several features including step response, frequency response and cut-off frequency in closed-loop mode were experimentally examined. Also, basic machining result shows that the proposed LFTS is capable of generating the optical free-form surface as an additional axis in diamond turning machine.

선형대향타겟 스퍼터를 이용하여 성막시킨 InSnTiO 박막의 특성 연구

  • Sin, Hae-In;Kim, Han-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.245-245
    • /
    • 2016
  • 본 연구에서는 선형 대향 타겟 스퍼터 (Linear Facing Target Sputtering: LFTS) 시스템을 이용하여 ITO와 Ti doped $In_2O_3$ (TIO) 타겟을 Co-sputtering한 InSnTiO 투명 전극의 전기적, 광학적 특성을 연구하였다. InSnTiO 투명전극의 전기/광학적 및 구조적 특성은 Hall measurement, UV/Vis spectrometry, X-ray Diffraciton 분석법을 통해 최적화 하였고, DC power, substrate to target distance (TSD), target to target distance (TTD), ambient treatment 변수 조절을 통해 최적화된 LFTS InSnTiO 투명전극을 제작하였다. LFTS 공정을 이용한 InSnTiO 투명전극의 성막 공정 중 DC파워와 공정압력 변화에 따른 구조적, 표면적 특성 변화는 Field-Emission Scanning Electron Microscopy (FE-SEM) 과 X-ray Diffractometer (XRD) 분석을 통해 관찰하였다. 이렇게 증착된 InSnTiO 투명전극은 급속열처리 시스템으로 (Rapid Thermal Annealing system) 후열처리를 진행하여 투과도의 향상과 면저항의 감소를 확인하였다. 본 연구에서는 다양한 분석을 통해 Co-sputtering한 InSnTiO 박막의 특성과 다양한 장점을 소개한다.

  • PDF

Effects of the Obesity Therapy with Korean Herbal Medicine on Liver Function: Case Series (한방비만치료가 비만환자의 간기능에 미치는 영향 증례보고)

  • Lee, Ji-Hyeon;Jeon, Woo-Hyeon
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.17 no.1
    • /
    • pp.54-60
    • /
    • 2017
  • Many obesity patients were affected by depressed liver function including hepatosteatosis. The aim of this study was to investigate the clinical effect of the obesity therapy with Korean herbal medicine (KHM) on obese patient with abnormal liver function. This is a retrospective observational study performed on obesity patients with abnormal liver function. All subjects have taken serum liver function tests (LFTs) before treatment. Ten patients showed abnormal LFTs. They were treated with KHM at least 15 days. During this treatment, LFTs were evaluated afterwards. Body weight and body mass index of the patients were decreased during treatments. Five of 10 subjects recovered normal levels of LFTs. While other subjects remained at abnormal level but their levels were decreased. This study shows that the obesity therapy including KHM could be effective to improve liver function on obese patient. Additional large scale studies are necessary for more evidences.

Linear facing target sputtering을 이용하여 PET 기판위에 성막한 AZO 박막의 특성 연구

  • Sin, Hyeon-Su;Jeong, Jin-A;Kim, Han-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.223-223
    • /
    • 2010
  • 본 연구에서는 Al-doped ZnO (AZO) 박막을 linear facing target sputter (LFTS) 시스템을 이용하여 성막 하였고 박막의 특성을 분석하였다. LFTS 시스템은 마주보는 두 AZO 타겟 사이에 고밀도의 플라즈마를 구속시켜 플라즈마 데미지 없이 산화물 박막을 성막 시킬 수 있는 장치이다. LFTS로 성막된 AZO 박막의 인가된 DC 파워에 따른 전기적 특성을 분석하기 위해 four-point probe와 Hall measurement 장비를 이용하여 분석을 진행 하였으며, 광학적 특성 분석을 위해 UV/Vis spectrometer 장비를 이용하여 분석하였다. AZO 박막의 구조적, 표면적 특성을 분석하기 위해 X-ray diffraction(XRD) 및 scanning electron microscope(SEM)을 사용하여 상온에서 성막된 AZO 박막의 특성을 관찰 하였다. 또한 AZO 박막의 PET 기판과의 접합성 및 구부림 시의 안정성을 평가하기 위해 bending test를 진행 하였다. 최적화된 AZO 박막으로부터 기판에 성막 중 열처리공정이나 후 열처리 공정의 진행 없이 35 ohm/square의 낮은 면저항과 약 80 % 이상의 투과율을 얻을 수 있었다. LFTS 시스템을 이용하여 낮은 공정온도에서 AZO 박막을 성막 하였음에도 불구하고 낮은 저항과 높은 투과도 특성을 나타내고 있어 기존의 투명 박막을 대체 할 수 있는 가능성을 제시하였다

  • PDF

선형 대향 타겟 스퍼터 시스템을 이용하여 성막한 Ti-doped $In_2O_3$ 박막의 전기적, 광학적, 구조적 특성 연구

  • Lee, Ju-Hyeon;Sin, Hyeon-Su;Kim, Han-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.325-325
    • /
    • 2013
  • 본 연구에서는 선형 대향 타겟 스퍼터(Linear Facing Target Sputtering: LFTS) 시스템을 이용하여 성막한 Ti-doped In2O3 (TIO) 투명 전극의 전기적, 광학적 특성을 연구하였다. LFTS 시스템을 이용하여 유리기판 위에 TIO 박막을 증착시킬 때, 타겟과 기판 사이의 거리(Target-to-Substrate Distance)를 30 mm, 타겟과 타겟 사이의 거리(Target-to-Target Distance)를 65 mm, Ar/$O_2$ 가스의 비율 100:1로 각각 고정한 후, TIO 타겟에 인가되는 DC 파워와 공정압력을 변수로 TIO 박막을 하였다. LFTS 공정을 이용한 TIO 투명전극의 성막 공정 중 DC파워와 공정압력 변화에 따른 구조적, 표면적 특성 변화는 field-effect scanning electron microscopy (FE-SEM) 과 x-ray diffractometry (XRD) 분석을 통해 관찰되었다. 이렇게 증착된 200 nm 두께의 TIO 투명전극은 급속열처리 시스템으로 700도에서 후 열처리를 진행하였으며 상온에서 217.5 ohm/sq의 면저항을 나타내는 TIO박막이 열처리후 35 ohm/sq로 면저항이 급격히 감소됨을 확인하였다. 뿐만 아니라 열처리후 가시광선 영역 (400~800 nm)에서의 TIO 박막의 평균 투과율이 81.02%에서 83.4%로 향상됨을 UV/visible spectrometry 분석을 통해 확인하였다. 본 연구에서는 다양한 분석을 통해 TIO 박막의 특성과 ITO와 구별되는 다양한 장점을 소개한다.

  • PDF

Influence of Prescribed Gamitaeeumjowi-tang on Liver Function : Prospective Single-center Pilot Study (가미 태음조위탕 복용이 간기능에 미치는 영향 : 전향적 단일기관 예비연구)

  • Jin, Yong-Huei;Kim, Kang-Sik;Han, In-Yeop;Lee, Hyun-Bae
    • Journal of Korean Medicine for Obesity Research
    • /
    • v.10 no.1
    • /
    • pp.29-40
    • /
    • 2010
  • Objective The aim of this study was to evaluate the influence of Gamitaeeumjowi-tang(GTT) prescribed by doctors of korean(KMD) medicine on liver function. Methods For this single-center, prospective, observational study, we enrolled patients who wished to take GTT prescribed by KMD for losing weight. sixty(60) patients took GTT for 33.8 days and completed questionnaires. Liver function tests(LFTs) were performed bofore(first test) and after each GTT treatment(finish test). For LFT, T-bil, ALP, AST, ALT were measured. Result There were no significant changes in LFT data between the first and finish tests. At first test, levels of test seven(7) patients were more than twice of normal range of upper limit, levels of eight(8) patients were more than normal range of upper limit, less than twice of normal range of upper limit. At last test, levels of nine(9) patients were more than normal range of upper limit, less than twice of normal range of upper limit. Conclusion The current study showed that ingestion of GTT prescribed by KMD did not increase the frequency of abnormal LFTs, at least in the short term.

Effect of Rapid Thermal Annealing on the Ti doped In2O3 Films Grown by Linear Facing Target Sputtering

  • Seo, Ki-Won;Kim, Han-Ki
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.342.1-342.1
    • /
    • 2014
  • The electrical, optical and structural properties of Ti doped $In_2O_3$ (TIO) ohmic contacts to p-type GaN were investigated using linear facing target sputtering (LFTS) system. Sheet resistance and resistivity of TIO films are decreased with increasing rapid thermal annealing (RTA) temperature. Although the $400^{\circ}C$ and $500^{\circ}C$ annealed samples showed rectifying behavior, the $600^{\circ}C$ and $700^{\circ}C$ annealed samples showed linear I-V characteristics indicative of the formation of an ohmic contact between TIO and p-GaN. The annealing of the contact at $700^{\circ}C$ resulted in the lowest specific contact resistivity of $9.5{\times}10^{-4}{\Omega}cm^2$. Based on XPS depth profiling and synchrotron X-ray scattering analysis, we suggested a possible mechanism to explain the annealing dependence of the properties of TIO layer on rapid thermal annealing temperature.

  • PDF

The Evaluation of Potential Hepatotoxicity by Calcium Channel Blockers, Renin-Angiotensin System Blockade and Diuretics (칼슘채널차단제, 레닌-안지오텐신시스템 차단제, 이뇨제의 잠재적 간독성 평가)

  • Kim, Jae Yun;Lee, Ok Sang;Jung, Sun Hoi;Lee, Hye-Suk;Lee, Chang Ho;Kim, Sang Geon;Lim, Sung Cil
    • Korean Journal of Clinical Pharmacy
    • /
    • v.22 no.4
    • /
    • pp.330-339
    • /
    • 2012
  • Background : Hypertension is treated with both lifestyle modification and pharmacotherapy. The Seventh Report of the Joint National Committee on Detection, Evaluation, and Treatment of High Blood Pressure (JNC-7), published in 2003, provides a streamlined management approach to hypertension for the primary care physician. The JNC-7 is the gold standard also in Korea. According to the JNC-7, special therapeutic considerations are recommended for high-risk individuals with compelling indications. The presence of compelling indications in any given patient should be considered when selecting specific pharmacotherapy to treat hypertension. However, in patients with compelling indications, it is unknown that hepatotoxicity is caused by Calcium Channel Blocker (CCB), one of 1st anti-hypertensive drugs. Now, the CCB is the most used 1st anti-hypertensive drug in Korea Therefore, we evaluated the changes in blood liver function parameters (ALT, AST, Total bilirubin, serum albumin) for the study group. Methods : We randomly collected and retrospectively analyzed Electronic Medical Record data (n=28,788) of patients, and who took calcium channel blockers(non-dihydropyridines; diltiazem, verapamil, dihydropyridines; amlodipine, barnidipine, benidipine, clinidipine, efonidipine, felodipine, isradipine, lacidipine, lercanidipine, nicardipine, nifedipine, nimodipine), with having liver function tests (LFTs) from July 1st 2009 to June 30th 2010 at the Seoul National University Hospital in Korea. Control groups are two antihypertensive agents: RAS blockade (ARB; candesartan, irbesartan, losartan, olmesartan, telmisartan, valsartan, ACE-I; cilazapril, enalapril, fosinopril, imidapril, perindopril, ramipril) and, Diuretics (loop; furosemide, torsemide, thiazide; hydrochlorothiazide[HCTZ], indapamide). Patients not having LFT results at these three standard points of time(baseline, during, medication, and after finishing medication) were excluded. The collected data were analyzed by using the SPSS (Version12.0) and Microsoft Excel (Version2007). Results : 711 patients who were treated CCB (297), RAS blockade (232) or Diuretics (182) monotherapy were selected for the study. In selected patients, liver damage degree(changes of each LFTs value) was higher in diuretics group than other groups, followed by RAS blockade and CCB. In diuretics group's was loop-diuretics group was higher than thiazide-diuretics group. In CCB group, Nondihydropyridine-CCB's damage degree was higher than Dihydropyrine-CCB's that. Conclusions : Despite the limitations due to the retrospective study, among patients with abnormal LFTs, the use of CCBs led to a less liver damage than other 1st anti-hypertensive agents. It can be recommended CCBs as one of the initial treatments of hypertension in patients with liver disease.

고효율 플렉서블 유기태양전지를 위한 IZTO/PEDOT: PSS 다층 투명 전극의 전기적, 광학적, 구조적 특성 연구

  • Lee, Ju-Hyeon;Sin, Hyeon-Su;Na, Seok-In;Kim, Han-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.571-571
    • /
    • 2013
  • 본 연구에서는 유연 유기태양전지용 플렉시블 InZnSnO (IZTO)/PEDOT:PSS 투명전극을 제작하고 그 특성을 연구하였다. 이를 위해 선형 대향 타겟 스퍼터(Linear Facing Target Sputtering: LFTS) 시스템을 이용하여 그라비아 프린팅된 PEDOT:PSS/PET 매우 얇은 IZTO 투명전극을 성막하였다. 일반적으로 PEDOT:PSS 전극은 수분/산소에 약하지만 매우 얇은 IZTO passivation 층을 코팅함으로써 PEDOT:PSS의 안정성을 향상시키는 동시에 전기적 특성을 향상시킬 수 있다. 이러한 PEDOT:PSS 기반 하이브리드 투명 전극을 제작하기 위해 IZTO 두께를 5 nm에서 40 nm 까지 조절하여 IZTO/PEDOT:PSS 다층 투명전극을 제작하였으며, 이때 IZTO 두께 변수에 따라 제작된 하이브리드 IZTO/PEDOT:PSS 투명전극의 전기적, 광학적 특성을 분석하였다. 최적화된 20 nm의 IZTO의 두께에서 IZTO/PEDOT:PSS 하이브리드 투명전극은 PEDOT:PSS 단일층으로 제작된 플렉서블 투명전극과 동일한 우수한 유연성을 가짐과 동시에 PEDOT:PSS 단일층보다 현저히 낮은 면저항 값(353.6 ohm/sq.)과 높은 광투과율(83.09%)을 나타내었다. 최적화된 IZTO/PEDOT:PSS 투명전극으로부터 제작된 플렉서블 유기태양전지는 IZTO의 passivation 특성으로 인해 PEDOT:PSS 단일막을 이용하여 제작된 플렉시블 투명전극보다 우수한 소자효율을(FF: 59.04%, Voc: 0.588 V, Jsc: 7.554 mA/cm2, PCE: 2.622%) 나타내었다. 이러한 결과들은 LFTS 공법으로 PEDOT:PSS위에 성막된 IZTO passivation 층이 PEDOT:PSS의 특성을 향상시킬 뿐만 아니라, PEDOT:PSS의 안정성도 향상시킬 수 있기 때문에 기존 PEDOT:PSS 기반 투명 전극의 문제점을 해결할 수 있는 해결책으로 적용이 가능하다.

  • PDF

선형 대향 타겟 스퍼터 시스템으로 성장시킨 GaN-LED용 Ga-doped ZnO 박막 특성 연구

  • Sin, Hyeon-Su;Lee, Ju-Hyeon;Kim, Han-Gi
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.572-572
    • /
    • 2013
  • 본 연구에서는 Plasma damage-free 선형 대향 타겟 스퍼터(Linear Facing Target sputtering: LFTS) 시스템을 이용하여 성막시킨 GaN-LED의 투명전극용 Ga-doped ZnO (GZO) 박막의 특성을 연구하였다. LFTS 시스템을 이용한 GZO 성막 공정 중 LED소자의 플라즈마 노출에 의한 데미지를 최소화 하기 위해 일정한 타겟간 거리(Target-to-Target distance: 65 mm)에서 타겟과 기판간 거리(Target-to-Substrate distance)를 50 mm에서 120 mm로 변화시키며 GZO 투명 전극을 성막해 박막의 특성과 소자의 특성을 동시에 분석하였다. LFTS에서 플라즈마는 GZO 타겟 사이에 형성된 일방향의 자장에 의해 효과적으로 구속되기 때문에 기판과 타겟 거리를 최적화 할 경우 플라즈마 데미지를 최소화하며 GaN-LED의 제작이 가능하다. 기판과 타겟 사이의 거리가 120 mm에서 최적화된 200 nm 두께의 GZO 투명 전극은 DC 파워 250 W, 공정 압력 0.3 mTorr, Ar 20 sccm 실험 조건하에서 LED 소자 위해 성막되었으며, 이후 $600^{\circ}C$ 수소 분위기에서 1분간 급속 열처리하였고 면저항(37 Ohm/sq.)과 450 nm 파장에서의 투과도(83%)를 나타냄을 확인할 수 있었다. LED 소자와 타겟 사이의 거리가 50 mm에서 120 mm로 증가할수록 성막공정 중 LED 소자에 미치는 플라즈마 데미지의 감소로 인해 GaN-LED 소자의 turn on voltage가 8.2 V에서 3.4 V로 감소한 것을 확인하였으며, 또한 radiant intensity는 20 mA의 전류를 인가하였을 시 0.02 mW/sr에서 8 mW/sr로 400배 향상되었다. 이러한 소자 특성은 대향 타겟 스퍼터 시스템으로 성장시킨 GZO 투명전극이 LED 소자의 투명 전극 층(Transparent Conductive Layer: TCL)에 적용될 수 있음을 말해준다.

  • PDF