• Title/Summary/Keyword: LIDS

Search Result 42, Processing Time 0.023 seconds

Apply Low Impact Development for the reduction of runoff using SWMM model (SWMM 모형을 이용한 서암동지구에서의 유출수 저감을 위한 저영향개발기법 적용)

  • Woo, Won Hee;Lee, Tae Woo;Park, Youn Shik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.218-218
    • /
    • 2017
  • Urbanization increases impervious area and decreases the water quantity infiltrating into soil layers. This leads to lack of ground water, it could be possibly problematic for agricultural water for crop growth in lower basins, reducing not only ground water but also streamflow quantities. One such approach to minimize the impact of urbanization is to apply low impact developments (LIDs). LIDs are to decrease the percentage of impervious area so that infiltration rate is increased, there is a need to simulate the LIDs prior to the construction. LIDs in Storm Water Management Model (SWMM) are limited to be seven types, however it is often required to simulate LIDs more than seven types. Therefore an approach to apply eleven LIDs is provided in the study, updating the model parameters. A scenario containing eleven LIDs was given by the environmental decision makers, the effect of LIDs were simulated with the expected annual costs considering establishment and maintenance costs.

  • PDF

Preparation of koji for Red pepper paste by using Stainless Steel Trays Covered with Lids (유개상자를 이용한 고추장국의 조제에 관한 연구)

  • 배정설;이석건;유해열
    • Microbiology and Biotechnology Letters
    • /
    • v.8 no.4
    • /
    • pp.247-253
    • /
    • 1980
  • This experiment was carried out to improve the method of koji preparation by using stainless steel frays which were specially designed and covered with lids. To elucidate changes in chemical composition and formation of enzymes during the preparation of koji with glutinous rice for red pepper paste. professes, amylases, reducing sugars, nitrogens, and microbial contaminations were determined and compared with the case of using trays without lids. The results obtained were as follows. 1. The activities of protease and amylases (both liquefying and saccharifying activities) during the koji preparation were found to be higher incase of using the trays with lids than that without lids. 2. The contents of moisture, soluble nitrogen, amino nitrogen, and reducing sugar were also higher in case of using the trays with lids. 3. Contamination by yeasts and bacteria were markedly low in the trays with lids. 4. Temperature of koji was higher in the trays with lids, however the level of moisture loss was 1ower.

  • PDF

The Effects of Top and Bottom Lids on the Natural Convection Heat Transfer inside Vertical Cylinders (수직 원형관 내부에서 발생하는 자연대류 열전달에서 상·하단 마개의 영향)

  • Kang, Gyeong-Uk;Chung, Bum-Jin
    • Journal of Energy Engineering
    • /
    • v.20 no.3
    • /
    • pp.242-251
    • /
    • 2011
  • The effects of top and bottom lids on the natural convection heat transfer phenomena inside vertical cylinders were investigated experimentally for $Ra_{Lw}$ from $9.26{\times}10^9$ to $7.74{\times}10^{12}$. Using the concept of analogy between heat and mass transfer, a cupric acid-copper sulfate electroplating system was employed as mass transfer experiments replacing heat transfer experiments. The natural convection heat transfer of both-open cylinders in laminar and turbulent flows was in good agreement with the existing heat transfer correlations developed for vertical plates. The effects of top and bottom lids on the heat transfer rates were very similar to the studies of Krysa et al. and Sedahmed et al. and Chung et al. With the copper lids, the bottom-closed cavity showed the highest heat transfer rates and then followed both-closed, top-closed, both-open ones in both laminar and turbulent flows. However with the acryl lids, the similar trends were observed except that the heat transfer rates for both-open were higher than top-closed one. The use of the copper lids increased the heat transfer rates compared to the acryl lids due to the hydrodynamic interaction of the flows developed for the different heated faces. This study extended the ranges of flow conditions of the existing literatures and proposed the empirical correlations.

Reordering Scheme of Location Identifiers for Indexing RFID Tags (RFID 태그의 색인을 위한 위치 식별자 재순서 기법)

  • Ahn, Sung-Woo;Hong, Bong-Hee
    • Journal of KIISE:Databases
    • /
    • v.36 no.3
    • /
    • pp.198-214
    • /
    • 2009
  • Trajectories of RFID tags can be modeled as a line, denoted by tag interval, captured by an RFID reader and indexed in a three-dimensional domain, with the axes being the tag identifier (TID), the location identifier (LID), and the time (TIME). Distribution of tag intervals in the domain space is an important factor for efficient processing of a query for tracing tags and is changed according to arranging coordinates of each domain. Particularly, the arrangement of LIDs in the domain has an effect on the performance of queries retrieving the traces of tags as times goes by because it provides the location information of tags. Therefore, it is necessary to determine the optimal ordering of LIDs in order to perform queries efficiently for retrieving tag intervals from the index. To do this, we propose LID proximity for reordering previously assigned LIDs to new LIDs and define the LID proximity function for storing tag intervals accessed together closely in index nodes when a query is processed. To determine the sequence of LIDs in the domain, we also propose a reordering scheme of LIDs based on LID proximity. Our experiments show that the proposed reordering scheme considerably improves the performance of Queries for tracing tag locations comparing with the previous method of assigning LIDs.

Design and Implementation of an Enhanced Secure Android-Based Smartphone using LIDS

  • Lee, Sang Hun
    • Journal of Korea Society of Digital Industry and Information Management
    • /
    • v.8 no.3
    • /
    • pp.49-55
    • /
    • 2012
  • Recently, with the rapid development of android-based smartphones, it is becomes a major security issue that the case of Android platform is an open platform. so it is easy to be a target of mobile virus penetration and hacking. Even there are a variety of security mechanisms to prevent the vulnerable points of the Android platform but the reason of most of the security mechanisms were designed at application-level that highly vulnerable to the attacks directly to the operating system or attacks using the disadvantages of an application's. It is necessary that the complementary of the android platform kernel blocks the kernel vulnerability and the application vulnerability. In this paper, we proposed a secure system using linux-based android kernel applied to LIDS(Linux Intrusion Detection and Defense System) and applied a smart phone with s5pc110 chip. As a result, the unauthorized alteration of the application was prevented with a proposed secure system.

Linux System Security Using LIDS (LIDS를 이용한 리눅스 시스템 보안)

  • 정수진;김정녀;박승규;최경희;정기현
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2000.10a
    • /
    • pp.644-646
    • /
    • 2000
  • 리눅스의 활용 범위가 임베디드 시스템 혹은 웹 서버 등 다방면으로 넓어져 가면서 보안 문제도 이와함께 중요한 연구 및 개발 과제로 떠오르고 있다. Huagang은 Linux의 침입 감지 및 방어를 위하여 LIDS(Linux Intrusion Detection and Defense System)을 개발/발표하였다. LIDS는 시스템의 침입 감지 및 방어에 중점을 둔 시스템으로서 사용자별 파일을 보호하기 위한 개념이나 시스템 관리자를 비롯해 일반 사용자에 이르기까지 전체적인 보안을 만족시키기에는 여러 가지 부족한 면을 가지고 있다. 본 논문에서는 이러한 LIDS의 불편한 점을 보완하여 LIDS의 활용 가능성을 높이었다.

  • PDF

Reduction of Flow-Induced Noise in an Expansion Muffler with Lids (삽입관이 있는 확장형 소음기에서의 기류음 감소)

  • Kang, Woong;Kim, Hyung-Jin;Sung, Hyung-Jin
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.33 no.2
    • /
    • pp.79-84
    • /
    • 2009
  • Turbocharger has been widely used in many passenger cars in application with diesel engines because of high power and fuel efficiency. However, flow-induced noise (whoosh or hissing noise) which is generated within a compressor during its operation at marginal surge line can deteriorate noise characteristics. Hissing noise excitation is associated with the generation of turbulence within the turbocharger compressor and radiated through the transmission path in a turbocharger system. In this study, a expansion muffler with lids is devised and installed in the transmission path to reduce the hissing noise. Acoustic and fluid dynamic characteristics for the muffler are investigated which are related to the unsteadiness of turbulence and pressure in the turbocharger system. A transfer matrix method is used to analyze the transmission loss of the muffler. A simple expansion muffler with lids is proposed for the reduction of high frequency component noise. Turbulence simulation is carried out by a standard k - ${\varepsilon}$ model. An optimal design condition of the muffler is obtained by extensive acoustic and fluid dynamic analysis on the engine dynamometer with anechoic chamber. A significant reduction of the hissing noise is achieved at the optimal design of the muffler as compared with the conventional muffler.

Studies on the aeration improvement of inner bottle culture system during the mycelial culture of Flammulina velutipes (팽나무버섯의 균사배양 중 배양기 내부 통기성 개선)

  • Shim, Kyu-Kwang;Yoo, Young-Jin;Koo, Chang-Duck;Kim, Young-Seok;Kim, Myung-Koon
    • Journal of Mushroom
    • /
    • v.10 no.1
    • /
    • pp.15-20
    • /
    • 2012
  • Ventilation effects of bottles($1,100m{\ell}$) for culturing Flammulina velutipes on its mycelial growth and mushroom production were investigated. The degree of ventilation were controlled with hole positions, upper and under, and hole sizes in the bottle lids. The ventilation effects were measured with the contents of carbon dioxide, free sugars, chitin, moisture in the bottles and with the amount of produced mushrooms from the bottles. Carbon dioxide concentrations within the culturing bottles at exponential mycelial growth period vertex were relatively high in the bottles with lids without both a sponge and an aeration hole, and in those with a smaller hole. Free sugar contents in the mycelia were the highest in those with a 47mm hole on both sides, and in those with 26~33mm holes only underside. Chitin content was the highest in those with a 26mm hole only underside. On the other hand, the lids with 42mm~47mm holes on the both sides greatly lost water and decreased the mushroom production. In conclusion, the most efficient ventilation hole sizes on the lids for bottle($1,100m{\ell}$) cultivation of Flammulina velutipes using $1,100m{\ell}$ polypropylene bottle were 19mm on both sides of the lid and 26mm on only underside. They produced more mushrooms than the control by 6~9 %.

Design and Evaluation of an Adaptive Distributed Dynamic Location Management Algorithm for Wireless Mobile Networks (무선 이동망을 위한 적응적 분산 동적 위치 관리 알고리즘의 설계 및 평가)

  • Chun, Sung-Kwang;Bae, Ihn-Han
    • The KIPS Transactions:PartC
    • /
    • v.9C no.6
    • /
    • pp.911-918
    • /
    • 2002
  • An important issue in the design of future Personal Communication Service (PCS) networks is the efficient management of location information. In this paper, we propose an adaptive distributed dynamic location management algorithm that stores the position of the mobile terminal in k of the n location information databases (LIDs). The proposed algorithm chooses adaptively k. replication factor according to both the space locality of LIDs in wireless mobile networks and the location query popularity to local mobile terminal from remote mobile terminals. The performance of proposed algorithm is evaluated by both an analytical model and a simulation. Based on the results of performance evaluation, we know that the performance of the proposed algorithm is better than that of Krishnamurthi's algorithm regardless of call-mobility ratio.