• 제목/요약/키워드: LQ Feedback Controller

검색결과 41건 처리시간 0.023초

Fuzzy Modeling and Control of Wheeled Mobile Robot

  • Kang, Jin-Shik
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제3권1호
    • /
    • pp.58-65
    • /
    • 2003
  • In this paper, a new model, which is a Takagi-Sugeno fuzzy model, for mobile robot is presented. A controller, consisting of two loops the one of which is the inner state feedback loop designed for stability and the outer loop is a PI controller designed for tracking the reference input, is suggested. Because the robot dynamics is nonlinear, it requires the controller to be insensitive to the nonlinear term. To achieve this objective, the model is developed by well known T-S fuzzy model. The design algorithm of inner state-feedback loop is regional pole-placement. In this paper, regions, for which poles of the inner state feedback loop are lie in, are formulated by LMI's. By solving these LMI's, we can obtain the state feedback gains for T-S fuzzy system. And this paper shows that the PI controller is equivalent to the state feedback and the cost function for reference tracking is equivalent to the LQ(linear quadratic) cost. By using these properties, it is also shown in this paper that the PI controller can be obtained by solving the LQ problem.

LQ-servo를 이용한 강인한 PI제어기 설계 (Robust PI controller design using LQ-servo)

  • 이동영;윤성오;서병설
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.577-580
    • /
    • 1996
  • LQ-servo is a stability-robustness guaranteed multivariable controller design method based on the LQR structure to improve command following performance with output feedback. In this paper, a new type of PI controller based on LQ-servo is introduced. Then, Command following performance is improved using the limiting behavior of the control gain and weighting factors on the low frequency part of design parameter Q that is the state weighting matrix in the cost function.

  • PDF

$H_{\infty}$ CONTROLLER DESIGN VIA LQ GAME PROBLEM FOR DISRETE TIME SYSTEM

  • Kwon, Wook-Hyun;Lee, Joon-Hwa;Kim, Won-Chul
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.864-867
    • /
    • 1990
  • In this paper, a state space solution to the discete time H$_{\infty}$ control problem is presented. It is shown that there exist LQ game problem corresponding to H$_{\infty}$ control problems and the H$_{\infty}$ controller can be obtained by solving the LQ game problem. Explicit state space formulae are given for the state feedback H$_{\infty}$ controller and output feedback H$_{\infty}$ controllers.lers. state feedback $H_{\infty}$ controller and output feedback $H_{\infty}$ controllers.

  • PDF

최적화 기법에 의한 회전형 역진자 시스템의 LQ-Servo 제어기 설계 및 구현 (Design and Implementation of LG-Servo Controller for Rotational Inverted Pendulum System Using Optimization Method)

  • 이강민;양지훈;서병설
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.79-81
    • /
    • 2004
  • LQ-Servo controller inherits the stability-robustness from rational LQR structure and also, satisfies performance-robustness that is lacking in LQR structure by importing partial output feedback. In this paper, LQ-Servo controller is suggested for strengthening the performance-robustness. For this, Several executings are effectively performed by implementing to the rotational inverted pendulum system.

  • PDF

롤편심을 포함한 냉간 압연시스템의 두께제어 (Thickness Control of Cold-Rolling Mills with Roll Eccentricity)

  • 김승수;김종식;황이철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.248-254
    • /
    • 1996
  • A disturbance rejection controller using eccentricity filtering and LQ control techniques is proposed to alleviate significantly the effect of roll eccentricity in multivariable cold-rolling processes. Fundamental problems such as process time delay inherent in exit thickness measurement and non-stationary characteristics of roll eccentricity signals can be overcome by the proposed control method. The filtered instantaneous estimate of roll eccentricity may be exploited to improve instantaneous estimate of the exit thickness variation based on roll force and roll gap mearsurements, and a feedforward compensator is augmented as a reference for a gaugemeter thickness estimator. And, LQ feedback controller is combined with eccentricity filter for the attenuation of the exit thickness variation due to the entry thickness variation. The simulation results show that eccentricity components have been significantly eliminated and simultaneously other distrubances also have been attenuated.

  • PDF

가중치를 이용한 LQ-Servo형 PI 제어기 설계 (Design of LQ-servo PI controller considering Weight)

  • 서병설
    • 한국통신학회논문지
    • /
    • 제25권3B호
    • /
    • pp.570-576
    • /
    • 2000
  • 본 논문은 LQ-서보구조를 부분적 상태 피드백을 갖고 있는 PI제어기로 해석하여 LQ-서보형 PI 제어기를 제안하고 이를 설계하기 위하여서 종전의 LQ-servo 설계 기법의 설계 매개 변수에 가중치를 도입하여 설계 앨고리즘을 보다 유연성 있게 개발하는데 있다. 제안된 앨고리즘은 설계 루프 전달 함수의 최대 및 최소 특이값을 저주파와 고주파에서의 일치를 향상시킬수 있을 뿐만 아니라 성능 향상을 위해 루프 형상을 유연성 있게 설계할 수 있었다.

  • PDF

유도전동기의 속도 제어를 위한 LQ-PID 제어기 설계 (LQ-PID Controller Design for Speed Control of Induction Motor)

  • 이충우;서병설
    • 전자공학회논문지SC
    • /
    • 제41권3호
    • /
    • pp.1-8
    • /
    • 2004
  • 유도전동기의 속도제어시 속도의 지연이나 과도한 오버슈트가 발생하는 문제점을 해결하고 급제동 혹은 제동시 입력 속도와 출력 속도의 오차를 줄이기 위해서 LQ-PID제어기를 제안한다. LQ제어기는 극점들을 상태궤환에 의해 오버슈트와 정착시간등과 같은 설계사양을 만족하는 위치에 배치하는 방법이다. 그러나 폐루프 전달함수에 영점이 존재할때는 설계사양 오버슈트에 영향을 주므로 s-평면에서 기존의 LQ설계 방법으로는 이를 만족시킬 수 없다. 본 연구에서는 이와 같은 문제점을 해결하기 위해서 LQ제어기 설계시 폐루프 전달함수의 영점이 오버슈트에 미치는 영향을 제거할 수 있는 해석적인 방안을 포함하는 새로운 LQ-PID제어기 설계 방법을 제안하고자 한다.

최적 FIR 필터를 사용한 강인제어기 (Robust Controller with Optimal FIR Filter)

  • 김명준;권오규;이준화;권욱현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 A
    • /
    • pp.323-325
    • /
    • 1993
  • In this paper, an output feedback controller is proposed for continuous time-invariant linear systems. The proposed controller, LQ-FIR consists of an LQ control gain and an optimal FIR filter. The LQ-FIR controller is derived, and the stability of the closed loop system is proved. The bounds of parameter variations guaranteeing the closed loop stability are obtained, when the LQ-FIR controller is applied to the system with model uncertainties.

  • PDF

도시 철도 차량의 자동주행을 위한 LQ-서보 제어기의 설계 (LQ-Servo Design for Automatic Train Control of Urban Rail Vehicle)

  • 김창현;김용;이주;이형우
    • 전기학회논문지
    • /
    • 제63권11호
    • /
    • pp.1594-1601
    • /
    • 2014
  • In this paper, we propose the LQ servo control method for the automatic train control of urban rail vehicle. Structures of the conventional PID control and LQ servo controller are compared in order to demonstrate the simplicity of the proposed controller which doesn't have zeros of the closed loop systems. The energy consumption is dealt with as an object function to be minimized, which consists of the quadratic performance indices for optimal control with the input of the feedback linearization. The effectiveness of the proposed method is shown by the practical example, compared with the conventional PD controller.

7 자유도 차량 모델과 출력 되먹임을 이용한 자동차 능동 현가장치 설계에 관한 연구 (Output feedback, decentralized controller design for an active suspension system using 7 DOF full car model)

  • 노태수;정길도;홍동표
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.871-875
    • /
    • 1996
  • The Output feedback linear quadratic regulator control is applied to the design of active suspension system using 7 DOF full car model. The performance index reflects the vehicle vertical movement, pitch and roll motion, and minimization of suspension stroke displacements in the rattle space. The elements of gain matrix are approximately decoupled so that each suspension requires only local information to generate the control force. The simulation results indicates that the output feedback LQ controller is more effective than purely passive or full state feedback active LQ controllers in following the road profile at the low frequency range and suppressing the road disturbance at the high frequency ranges.

  • PDF