• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.195-198
• /
• 2012

Numerical simulation is performed to evaluate the conditional moment closure (CMC) models for spray development, ignition, and turbulent combustion for the Engine Combustion Network (ECN) test cases. The CMC model is implemented in the open source code, OpenFOAM, to provide conditional flame structures through the solution of Eulerian as well as Lagrangian conditional transport equations. In spite of more accurate treatment of the convective term, Eulerian CMC provides similar ignition delays and lift-off lengths with Lagrangian CMC.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2006

This study summarizes advantages and disadvantages of numerical methods and compares ELLAM and LEZOOMPC to develop an efficient numerical modeling technique on contaminant transport. Eulerian-Lagrangian method and Eulerian method are commonly used numerical techniques. However Eulerian-Lagrangian method does not conserve mass globally and fails to treat boundary in a straightforward manner. Also, Eulerian method has restrictions on the size of Courant number and mesh Peclet number because of time truncation error. ELLAM (Eulerian Lagrangian Localized Adjoint Method) which has been popularly used for past 10 years in numerical modeling, is known for overcoming these numerical problems of Eulerian-Lagrangian method and Eulerian method. However, this study investigates advantages and disadvantages of ELLAM and suggests a change for the better. To figure out the disadvantages of ELLAM, the results of ELLAM, LEZOOMPC (Lagrangian-Eulerian ZOOMing Peak and valley Capturing), and visual MODFLOW are compared for four examples having different mesh Peclet numbers. The result of ELLAM generates numerical oscillation at infinite of mesh Peclet number, but that of LEZOOMPC yields accurate simulations. The simulation results suggest that the numerical error of ELLAM could be alleviated by adopting some schemes in LEZOOMPC. In other words, the numerical model which combines ELLAM with backward particle tracking, forward particle tracking, adaptively local zooming, and peak/valley capturing of LEZOOMPC can be developed for not only overcoming the numerical error of ELLAM, but also keeping the numerical advantage of ELLAM.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.17-23
• /
• 2020

In this study, the behaviors of a vessel and the ground during the vessel impacting an underwater slope that is part of an artificial protective island are analyzed using the coupled Eulerian-Lagrangian scheme. To consider the large deformation including the shear failure of soil, the Eulerian domain is used to model the ground and water, while the impacting objects are modeled as the Lagrangian domain. For efficiency, the mass scaling scheme is applied to the modeling of the impacting objects, and the ground is modeled by setting the Eulerian volume fraction values. To verify the applicability of the constructed model, a dynamic penetration anchor problem is analyzed. The impacting vessel is modeled using solid elements following the external shape of a container ship, and an analysis of a collision on the slope is performed. As a result, collision behaviors such as displacement, velocity, and dissipation energy are estimated, and the necessity of a parametric study as further research is established.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.47-54
• /
• 2006

In this paper, numerical algorithms applied in two-step eulerian scheme are investigated and implemented. Element quantities are advected with donor or van Leer algorithm. Nodal quantities are advected with Simplifed ALE [SALE] algorithm. Material interfaces are determined with Simple Line Interface Calculation [SLIC] algorithm. Practical aspects considered for code development are addressed in detail. The results of developed two-step Eulerian code are verified by comparing with those from pure lagrangian scheme and commercial code.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.69-78
• /
• 1995

The arbitrary Lagrangian-Eulerian(ALE) finite element analysis is applied to the axisymmetric hot extrusion through continuous dies. In order to simulate hot forming problems, an ALE scheme for temperature analysis is proposed. The computed results are compared with experimental results as with those by pure Lagrangian method. In the present study mesh control is accomplished by the use of isoparametric mapping of quadrilaterals.

• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.907-914
• /
• 2002

Various Eulerian-Lagrangian models for the one-dimensional longitudinal dispersion equation in nonuniform flow were studied comparatively. In the models studied, the transport equation was decoupled into two component parts by the operator-splitting approach; one part is governing advection and the other is governing dispersion. The advection equation has been solved by using the method of characteristics following fluid particles along the characteristic line and the results were interpolated onto an Eulerian grid on which the dispersion equation was solved by Crank-Nicholson type finite difference method. In the solution of the advection equation, Lagrange fifth, cubic spline, Hermite third and fifth interpolating polynomials were tested by numerical experiment and theoretical error analysis. Among these, Hermite interpolating polynomials are generally superior to Lagrange and cubic spline interpolating polynomials in reducing both dissipation and dispersion errors.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.748-751
• /
• 2011

일반적으로 물체의 거동을 해석하기 위해 고체영역에서는 Lagrangian 기법이 유체영역에서는 Eulerian 기법이 수치해석에 적용된다. Lagranian 기법은 서로 다른 물질의 경계와 자유표면에 대한 거동을 쉽게 추적할 수 있는 반면 물체의 대변형시 해석의 정확성이 떨어지는 단점이 있다. 또한 Eulerian 기법은 물질이동만을 고려하여 변형의 제한이 없는 장점을 가지고 있지만 이동하는 경계에 대해서 조건을 변화 시켜야하는 어려움이 있다. 따라서 이 두기법의 장단점을 서로 보안하기 위해 ALE(Arbitrary Lagrangian Eulerian)기법이 제안되었으며 이를 적용한 유체-구조물의 상호작용 해석에 대하여 많은 연구가 진행되고 있다. 본 논문에서는 이러한 ALE기법을 이용한 자유경계면에 대한 새로운 알고리즘이 제안된다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.235-242
• /
• 2003

The solids and the fluids in porous media have a relative velocity to each other. Due to physically and chemically different material properties and their relative velocity, the behavior of saturated porous media is extremely complicated. Thus, in order to describe and clarify the deformation behavior of saturated porous media, constitutive models for deformation of porous media coupling several effects such as flow of the fluids or thermodynanical change need to be developed in frame of Arbitrary Lagrangian Eulerian (ALE) description. The aim of ALE formulations is to maximize the advantages of Lagrangian and Eulerian elements, and to minimize the disadvantages. Therefore, this method is appropriate for the analysis of porous media that are considered for the behavior of the solids and the fluids. In this work, governing equations of porous media based on ALE description are obtained from governing equations in frame of updated Lagrangian description. Then, weak forms of these equations are derived using arbitrary weighting functions.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.381-388
• /
• 2006

A porous medium is composed of solids, fluids, and gas which have different physical and chemical properties. In addition, these constituents have a relative velocity between each other. So far, in order to analyze porous media using finite element method, Lagrangian or Eulerian method has been used. However, the numerical analyses for porous media have a defect that the methods do not describe the movements of constituents. In this paper, numerical analysis for unsaturated porous media was performed in frame of ALE method which has advantages of Lagrangian and Eulerian. Namely, the Lagrangian description was used in solid phase, and the Eulerian description was used in fluid or gas phase in a porous medium Then the relationship between each other was controlled by the convective term in ALE method. Finally, the numerical results of ALE were compared with tile results of Lagrangian analysis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.173-181
• /
• 1993

An improved two-dimensional Eulerian-Lagrangian convection-dispersion model was established after comparing several models. To simulate long term release of discontinuous suspended solid source from coastal dike construction, source was represented by Fourier transformation. It was concluded that this model can effectively simulate long term coastal dispersion problems.