• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.95-97
• /
• 2007

Large area flicker is one of the most annoying image defects, and it is an inherent characteristic of impulsively driven displays such as CRTs. Recently, LCDs have also adopted impulsive driving methods for improved motion picture quality, therefore LCDs can also show large area flicker. Existing metrics do not account for the non-linearity of human brightness perception. This paper presents an improved large area flicker metric to more accurately quantify large area display flicker performance.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.84-87
• /
• 2014

Protection of solar cell surface is important to prevent from dust, pollen, sand, etc. Therefore, development of large area antifouling film is urgent for high performance of solar cells. The surface of silica spheres was modified to fabricate large area antifouling film. The surface of monodisperse silica spheres has been modified with 3-(trimethoxysilyl) propylmethacrylate (TMSPM) to fabricate large area photonic crystal. Although the surface modification of silica spheres with TMSPM has been failed for the base catalyst, the second trial using acid catalyst showed the following results. The FTIR absorption peak at $1721cm^{-1}$ representing C=O stretching vibration indicates that the TMSPM was attached on the surface of silica spheres. The methanol solution comprised of the surface modified silica spheres (average diameter of 380 nm) and a photoinitiator was poured in the patterned silicon wafer with the dimension of 10 cm x 10 cm and irradiated UV-light during the self-assembly process. The result showed large area crack and defect free nanostructures.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.1
• /
• pp.10-14
• /
• 2004

A large area electron beam generator has been developed for industrial applications, for example, waste water cleaning, flue gas treatment, and food pasteurization. The operational principle is based on the emission of secondary electrons from the cathode when ions in the plasma contact the cathode, which are accelerated toward the exit window by the gradient of the electric potential. Conventional electron beam generators require an electron beam scanning mechanism because a small area thermal electron emitter is used. The electron beam of the large area electron beam generator does not need to be scanned over target material because the beam area is considerable. We have fabricated a large area electron beam generator with peak energy of 200keV, and a beam diameter of 200mm. The electron beam current has been investigated as a function of accelerating voltage and distance from the extracting window while its radial distribution in front of the extracting window has been also measured.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.923-926
• /
• 2009

We fabricated large-area OLED lighting device using screen printing. In order to operate full area of large-area OLED uniformly, each cell in OLED panel was designed to work separately. We connected OLED panel with a PCB electrically using jig pins so that each cell could be operated individually. In this presentation, we report a few important issues on the fabrication of large-area OLED for lighting applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1237-1239
• /
• 2008

Imaging Systems Technology is conducting research and development in large area flexible plasma displays. These displays will be used for low cost dynamic signage and billboards. In this paper, IST will report its current progress in achieving very bright full color displays.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.84-87
• /
• 2009

This paper describes a novel method for fabricating large area metallic stamp with high aspect ratio micro intaglio features. Micro machined brass master with pillar and larger width groove patterns were electroformed to form inverse structures on the large area metallic stamp. This enabled large area metallic stamp with fine micro high aspect ratio micro intaglio features which were small width groove patterns and quadrilateral hole patterns that cannot be fabricated by direct micro machining process. Fabricated large area metallic stamp with high aspect ratio micro intaglio features was measured and analyzed.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.53-59
• /
• 2011

Recently there have been considerable attentions on nanoimprint lithography (NIL) by the display device and semiconductor industry due to its potential abilities that enable cost-effective and high-throughput nanofabrication. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper we focused on the deformation of the $2^{nd}$ generation TFT-LCD sized ($370{\times}470mm^2$) large-area soft mold in the UV imprinting process. A mold was fabricated with PDMS(Poly-dimethyl Siloxane) layered glass back plate(t0.5). Besides, the mold includes large surrounding wall type protrusions of 1.9 mm width and the via-hole(7 ${\mu}m$ diameter) patterend area. The large surrounding wall type protrusions cause the proximity effect which severely degrades the uniformity of residual layer in the via-hole patterend area. Therefore the deformation of the mold was calculated by finite element analysis to assess the effect of large surrounding wall type protrusions and the flexiblity of the mold. The deformation of soft mold was verified by the measurements qualitatively.

• Korean Institute of Interior Design Journal
• /
• no.23
• /
• pp.9-16
• /
• 2000

year in Europe and Asia. Therefore the introduction of new ships continues at a great rate. There is a definite trend toward either large ships or smaller, more luxurious vessels in cruise industry. The day to design and build the large cruise vessel is coming to Korean shipyards, sooner or later. The most important thing to design large cruise vessel is to have a correct comprehension about the feature of cruise vessel, especially of the passenger accommodation area in cruise vessel. This paper is on the spatial features of the passenger accommodation area in cruise vessel. General arrangement drawings, deck plans and technical data of the newest large cruise ships are analysed to understand the spatial features and induce the direction of space planning of passenger accommodation area for the large cruise ship of tomorrow.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.115-118
• /
• 2005

A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, real-time measurement and compensation is required to guarantee the form accuracy of micro features while machining a workpiece with a large surface area. In this study, a method is suggested for real-time measurement of geometric error for the micro grooving of a large flat surface using a laser displacement sensor. The measurements are demonstrated for the workpieces with large surface areas and the experimental results show that the waviness and form error are well detected.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.365-380
• /
• 1999

In this thesis the legal systems related to real estate and sea area utilization are studied in order to improve them for construction of Very Large Floating Structure. Main research subjects are as follows: 1) Whether can Very Large Floating Structure be accepted or not as real estate like house and land\ulcorner 2) How can the sea area which is occupied by Very Large Floating Structure be utilized\ulcorner As the conclusion, the Very Large Floating Structure can be registered as real estate even though it is not specified by Korean law for the present. The design concept of Very Large Floating Structure can be interpreted as satisfying enough necessary conditions and factors for Very Large Floating Structure to become real estate. In the near future, we have to make improvement on the laws related with the construction of Very Large Floating Structures so that private sectors can joint the construction. In additions, a new law for various floating structures should be made as soon as possible.