• 반도체디스플레이기술학회지
• /
• 제9권4호
• /
• pp.31-37
• /
• 2010

In this paper, optical deflection of laser scattering has been investigated based on Rayleigh criterion for crystalline silicon wafer in solar cell. A laser scattering mechanism is newly designed using light scattering properties in silicon wafer. Intensity distributions of laser scattering are different, depending on the incident angle of laser computed from Rayleigh criterion. In case of the incident angle satisfied with the criterion, they are asymmetric. Also, their specular reflection angle is shifted to unpredicted ones. These phenomena are in accordance with previous theories of laser scattering. The optical deflection of laser scattering is experimentally identified with the designed laser scattering mechanism. Its mathematical model is presented from the geometric relationship of laser scattering. It is shown that the optical deflection of laser scattering agree with the presented model, exclusive of grazing angles which is satisfied with Rayleigh criterion.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• 한국정밀공학회지
• /
• 제26권7호
• /
• pp.58-64
• /
• 2009

In this paper, an inspection mechanism based on laser scattering has been developed for the surface evaluation of infrared cut-off filters, and optimum conditions of laser scattering are determined using the design of experiment. First of all, attributes and influence factors of laser scattering are investigated and then a laser scattering inspection mechanism is newly designed based on analyses of laser scattering parameters. Also, Taguchi method, one of experimental designs, is used for the optimum condition selection of laser scattering parameters and the optimum condition is determined in order to maximize the detection capability of surface defects. Experiments show that the proposed method is useful in a consistent and effective defect detection and can be applied to surface evaluation processes in manufacturing.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.7-12
• /
• 2011

In this paper, a laser scattering mechanism are designed to detect micro defects such as dent, scratch, pinhole, etc. Its influential parameters are experimentally selected and scattering patterns of micro defects have been analyzed for silicon wafer in solar cell. As a result of experiments, scattered lights are rather increased in wafer surface with micro defects, in comparison to no micro ones. Scattering parameters are optimally selected for obtaining robust and high quality laser scattering images of micro defects. It is shown that scattered light components are linearly increased according to the increase of micro defect sizes, and the depth of micro-defects give a large influence on optical deflection.

• 한국레이저가공학회지
• /
• 제15권4호
• /
• pp.6-11
• /
• 2012

Laser beam can be either absorbed or scattered in porous ceramic material and its optical characteristics need to be understood. Electro-magnetic multiphysics software was used to simulate and understand the actual scattering phenomena in porous materials. 785nm femtosecond laser was irradiated on the surface of ceramic material and strong scattering occurred in drilling process. The computer results showed the scattering and absorption phenomena of Aluminum oxide were a mixture of dielectric and metallic material. The computer simulation showed the laser beam was almost extinct at the aspect rate of 5 approximately.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.169-173
• /
• 2007

During laser irradiation, mechanically deformed cartilage undergoes a temperature dependent phase transformation resulting in accelerated stress relaxation. Clinically, laser-assisted cartilage reshaping may be used to recreate the underlying cartilaginous framework in structures such as ear, larynx, trachea, and nose. Therefore, research and identification of the biophysical transformations in cartilage accompanying laser heating are valuable to identify critical laser dosimetry and phase transformation of cartilage for many clinical applications. quasi-elastic light scattering was investigated using Ho : YAG laser $(\lambda=2.12{\mu}m\;;\;t_p\sim450{\mu}s)$ and Nd:YAG Laser $(\lambda=1.32{\mu}m\;;\;t_p\sim700{\mu}s)$ for heating sources and He : Ne $(\lambda=632.8nm)$ laser, high-power diode pumped laser $(\lambda=532nm)$, and Ti : $Al_2O_3$ femtosecond laser $(\lambda=850nm)$ for light scattering sources. A spectrometer and infrared radiometric sensor were used to monitor the backscattered light spectrum and transient temperature changes from cartilage following laser irradiation. Analysis of the optical, thermal, and quasi-elastic light scattering properties may indicate internal dynamics of proteoglycan movement within the cartilage framework during laser irradiation.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.35-41
• /
• 2010

본 논문에서는 레이저 산란 영상을 이용하여 표면거칠기를 실험적으로 규명하였다. 우선, 레이저 산란 매개변수들과 표면형상에 따라 나타나는 광로의 편향성에 대해 고찰하였고, 이를 이용하여 레이저 산란 검사 시스템을 구성하였다. 연삭표면에서 획득한 레이저 산란 영상을 분석한 결과 영상에서 수직방향으로 나타나는 산란광 분포영역이 증가와 감소를 반복하는 특징이 나타났다. 이러한 차별적 특징을 표현하는 레이저 산란 영상을 획득하기 위해 실험계획법을 이용하여 레이저 산란변수들의 최적조건을 선정하였고, 연삭표면에서 표면거칠기가 증가함에 따라 레이저 산란 영상 내에서 수직방향으로 나타나는 산란광 분포 영역이 선형적으로 증가함을 알 수 있었다. 이러한 정보는 마이크로 표면의 평가 및 거칠기 측정 시 주요한 인자로 사용될 수 있을 것이다.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.76-83
• /
• 2007

The dark-field laser scattering system has been developed to inspect surface defects in infrared cut-off filters and then laser scattering characteristics against the defects are investigated. The qualitative analysis for the reliable and accurate detection performance is described through the correlation between incident angles of a laser and viewing ones of a camera. In this paper, reliable and important information with laser scattering is given for the surface defect inspection of IR filters. Its performance has been verified through various experiments.

• 한국가시화정보학회지
• /
• 제2권1호
• /
• pp.52-56
• /
• 2004

Several visualization techniques of laser diagnostics are presented for combustion phenomena, including Mie scattering for flow, Rayleigh and Raman scattering spectroscopy for major species, laser-induced fluorescence for minor species, and laser-induced incandescence for soot. These techniques have been applied to understand the various combustion phenomena more clearly, including buoyancy-dominant flow system, diffusion flam oscillation, laminar and turbulent lifted flames, flame propagation along a vortex ring, and soot zone characteristics. The usefulness of laser diagnostics on a better understanding of physical mechanism is demonstrated.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.107-114
• /
• 2011

본 논문에서는 나노 래핑 표면의 형상과 레이저산란 패턴 사이의 실험적 모델링에 관한 연구를 하였다. 우선, 반사표면에서 나타나는 산란광 속성들을 고찰하여 암시야 기반의 레이저산란 검사 메커니즘을 구성하였다. 이 메커니즘을 이용한 레이저산란 패턴 분석의 경우, 나노 래핑 표면 형상으로부터 산란된 레이저산란 성분은 불규칙하게 사선형태로 교차됨을 알 수 있다. 또한, 실험 계획법을 기반으로 도출된 매개변수로 적용된 최적의 레이저산란 영상에서 나노 래핑 표면 거칠기와 레이저산란 성분 사이의 상관관계를 회귀분석법을 이용하여 수학적 모델링을 시도 하였다. 이 모델의 검증을 위해 나노 래핑 표면 3 종류의 거칠기에 대해 50 번의 반복실험을 수행한 결과, 제시된 수학적 모델은 실제 거칠기 값에 근접하게 추정할 수 있음을 보였다.