• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.501-502
• /
• 2010

• 정보저장시스템학회논문집
• /
• 제7권1호
• /
• pp.36-41
• /
• 2011

The micro laser module was designed and prepared to deliver the light to the HAMR head. It consists of laser diode, photo diode and actuator to realize stable light delivery even though the head is fluctuated during the disk rotation. The optical evaluation was carried out with the actual distance between the light source and HAMR head with a range of reflectivity and it was found that the incident angle could be controlled within ${\pm}0.125^{\circ}$ to maintain same intensity into the HAMR head. It was also confirmed that the designed micro laser module is thermally stable without any severe effect on the magnetic head.

• Medical Lasers
• /
• 제9권1호
• /
• pp.6-11
• /
• 2020

Hydrogels have been developed and used in tissue engineering and regenerative medicine to deliver therapeutics to injured or diseased tissue because of their versatility and properties that can be tailored to match the natural extracellular matrix. Hydrogels can be made with a variety of physical and chemical properties combined with light responsiveness ideal for applications in different fields of medicine that require the spatiotemporal control of therapeutics. Light, as a stimulus, is relatively inexpensive, contact-free, noninvasive with high spatial resolution and temporal control, convenient and easy to use, and allows deep tissue penetration that is relatively harmless. Photoresponsive hydrogels are ideal candidates for on-demand drug delivery systems that are capable of sustained and controlled drug release, minimizing the side effects, and ensuring the activity and efficient delivery of drugs to the target tissue.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.68-69
• /
• 2009

Heat Assisted Magnetic Recording (HAMR) is one of the most promising candidates for high density magnetic storages over 1 Tb/$in^2$ areal density. Since the precise light delivery to the head is a key factor to realize HAMR application, it is required to establish the light delivery using micro laser module and micro actuator. For the careful control of micro actuator, a laser module was designed including laser diode, optical fiber, collimating lens, and fabricated V-groove substrate. In addition, the basic aligning method between the laser module and HAMR head was studied by the detection of current change in photo diode due to the amount of reflected light from the head.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.386-391
• /
• 2016

A traffic message delivery system using visible light communication(VLC) link has been demonstrated. The system is proposed to deliver simple traffic messages between cars at low speed. The message set is programmed in an FPGA-based digital board and one of the messages is sent to the other car. Considering the outdoor and indoor environments, the effects of sunlight and fluorescent lamps on received signal waveforms are described. The delivered message is successfully recovered over 2 meter. The link for message delivery can be concatenated.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.117-121
• /
• 2006

Generally, micro-stereolithography technology uses laser and complex optical system as light source and light delivery system, respectively. In this research, a novel micro-stereolithography technology that uses UV lamp that is more economical than UV laser as light source and optical fiber that is simpler than previous light delivery system has been developed. Furthermore, precise control system that is composed of 3-axis linear stage and shutter has been used to fabricate truly three dimensional micro-structure. For confirming the feasibility of developed micro-stereolithography apparatus, the solidification experiments were conducted. The solidification widths and depths datum of photopolymer as varying scanning speed of the UV light have been obtained. Using developed apparatus, some micro structures were fabricated successfully.

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.12-17
• /
• 2010

Thermally-assisted magnetic recording (TAMR) is a potentially promising approach to increase the storage density of hard disk drive (HDD). However, TAMR has some issues such as temperature effects, media problems, thermal deformation and light delivery. In this research, we focused on light delivery. One of the powerful methods to deliver the light from laser diode to recording medium is the use of an optical fiber and a specially designed prism. However, the TAMR with optical fiber may have some flyability problems induced by the mounted optical fiber and prism. Also, the TAMR suspension using an optical fiber has high vertical and pitch stiffness. Therefore, p-torque is greatly increased by the optical fiber. Also, flying height (FH) of the slider with TAMR suspension can be largely changed by p-torque. Therefore, in this paper, we focus on the pitch static attitude (PSA) tolerance and the FH by PSA of the TAMR suspension. The FH is investigated using various errors and the PSA tolerance for TAMR suspension is proposed.

• ETRI Journal
• /
• 제45권2호
• /
• pp.329-337
• /
• 2023

For safe last-mile autonomous robot delivery services in complex environments, rapid and accurate collision prediction and detection is vital. This study proposes a suitable neural network model that relies on multiple navigation sensors. A light detection and ranging technique is used to measure the relative distances to potential collision obstacles along the robot's path of motion, and an accelerometer is used to detect impacts. The proposed method tightly couples relative distance and acceleration time-series data in a complementary fashion to minimize errors. A long short-term memory, fully connected layer, and SoftMax function are integrated to train and classify the rapidly changing collision countermeasure state during robot motion. Simulation results show that the proposed method effectively performs collision prediction and detection for various obstacles.

• 한국멀티미디어학회논문지
• /
• 제14권6호
• /
• pp.752-758
• /
• 2011

본 논문의 연구내용은 차량간 통신에 응용이 가능한 조명용 LED 광통신 링크의 링크전송성공율 분석에 관한 연구로서, 가시광통신에 기반한 차량간 메시지 전달 시스템을 모델링 하고, 광수신 파워를 통해 신호대 잡음비 (signal-to-noise ratio)를 계산하고, 이에 따른 링크 전송성공확률을 계산함으로써, 가시광통신에 기반한 차량간 무선통신이 가능함을 검증하는 것이다. 저속이동 또는 정지 중인 차량의 후미등을 광송신기로 사용하고 후방차량의 전방에 장착된 광수신기를 이용하는 메시지 전달시스템에 있어, 각 차량의 위치가 정규확률분포를 따를 때, 광송신기 및 광수신기의 물리적 특성에 따른 링크전송성공확률을 계산한다. 먼저, 정규확률분포에 따라 차량의 위치를 랜덤하게 생성한 후, 각각의 광링크에 해당하는 BER을 계산하였다. 이를 통해, 전체 링크 중 $BER{\leq}10^{-6}$을 만족하는 링크의 비율을 링크전송성공율로 정의한 결과, 송신 광파워가 400mW이고 광송신기의 semi-angle at half power가 30도인 최적화되지 않은 차량간 광링크의 경우, 링크 전송성공율 90% 이상이 가능함을 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.201-204
• /
• 2012

Combustion characteristics of boiler fuels made of bio-oil and light-oil were experimentally investigated. Bio-oil was obtained by fast pyrolysis of woody biomass. Emulsion fuel made by mixing bio-oil (up to 30wt%) with light-oil and surfactant was completely burnt, resulting in the formation of combusted gas containing CO concentration less than 10ppm. Simple mixtures of bio-oil and light-oil with separate delivery lines also gave nice combustion characteristics.