• 제목/요약/키워드: Liquid crystal

검색결과 2,542건 처리시간 0.034초

이중 주파수 액정을 적용한 액정 셔터의 고속 응답 특성 (Enhanced Electro-optical Characteristics of Liquid Crystal Shutter with a Dual Frequency Liquid Crystal Material)

  • 김대수;한승환;배건;전철규
    • 한국전기전자재료학회논문지
    • /
    • 제27권5호
    • /
    • pp.303-306
    • /
    • 2014
  • In this paper, by using a dual frequency liquid crystal material, we propose a liquid crystal device with a fast response characteristics. The dual frequency liquid crystal material has a positive dielectric anisotropy value at a low frequency. With a high frequency, the dielectric anisotropy becomes negative. Therefore, the relaxation process is governed by not only the elastic deformation, but also the dielectric interaction. The measured decay time and rise time were 0.88 ms and 0.33 ms, respectively.

포스파티딜콜린의 액정형성을 이용한 로즈마린산 포집 효율연구 (A Study on Entrapment Efficiency of Rosmarinic Acid Using Liquid Crystal Phosphatidylcholin)

  • 강기춘
    • 공업화학
    • /
    • 제24권2호
    • /
    • pp.132-137
    • /
    • 2013
  • 포스파티딜콜린이 다량 함유된 수첨레시틴을 이용한 실험에서 액정구조가 잘 형성됨을 알 수 있었다. 액정구조를 형성하는 물질로는 포스포리피드, 에탄올, 물로 이루어짐을 알 수 있었고 로즈마린산을 지표물질로 캡슐화하였다. 액정의 평균입자크기는 480 nm ~ $3{\mu}m$로 이는 액의 구성물질과 물리적인 힘에 따라 다양한 크기의 형태로 존재하였다. 리포좀과 비교했을 때 액정구조는 매우 높은 캡슐화 효율을 보였다. 수첨레시틴의 함량이 증가하면 많은 액정을 형성하였고, 수첨레시틴의 함량이 적으면 액정의 양도 적게 나타났다. 로즈마린산을 함유한 액정구조의 방출실험결과 리포좀으로 형성된 베지클보다 훨씬 적은 양이 방출됨을 알 수 있었다.

Modeling an e-Beam Addressed Liquid Crystal Projection Display

  • Yang, Deng-Ke;Zhou, Fushan;Molitor, R.J.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.930-932
    • /
    • 2002
  • We have carried a theoretical study on e-beam addressed liquid crystal projection display in which the liquid crystal is switched by the electric field of the charge, produced by an electron beam, on the surface of the display. We calculated the electric field produced by the surface charge, the liquid crystal director configuration and the profile of the transmitted light. We studied the factors affecting the resolution of the display. We also studied the effect of pretilt angle on the performance of the display. The e-beam addressed liquid crystal projection display potentially has the advantages of high resolution and high brightness.

  • PDF

Advanced Liquid Crystal Materials for Monitor and TV Applications Introduction of New Technical Centre for Liquid Crystals in Korea

  • Lee, S.E.;Jacob, T.;Klasen-Memmer, M.;Tarumi, K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.921-923
    • /
    • 2002
  • Vertically Aligned (VA) technology is an advanced technology for TFT-LCDs, which is mainly used in larger size displays like monitors for desktop computers and even for TVs. We will review our recent developments of Liquid Crystal (LC) mixtures for VA display modes.

  • PDF

Fabrication and electro optical properties of stressed liquid crystal cell

  • Lee, Jung-Min;Park, Jin-Seol;Kang, Dae-Seung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.681-682
    • /
    • 2009
  • We fabricated a stressed liquid crystal cell by mixing liquid crystal with a photo-polymer. By carefully choosing the mixing ratio between liquid crystal and the polymer, and by suitable mechanical shearing of the substrates, we demonstrated feasible electro optical properties for displays.

  • PDF

Liquid crystal alignment on the inkjet printed polyimide by using new alignment method

  • Hwang, J.Y.;Wonderly, H.;Chien, L.C.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.506-508
    • /
    • 2007
  • We studied the nematic liquid crystal (NLC) alignment capability with a new alignment method utilizing an inkjet printed polyimide (PI) layer. A good, uniform LC alignment was achieved by the good PI printing using a new alignment method. The pretilt angle generated on the printed PI layer using the alignment method was almost the same as that on printed PI layer using rubbing alignment method. In addition, the good electro-optical performances of the new aligned twisted nematic (TN) cell with printed PI surface was obtained

  • PDF

액정핏치 형성에 관한연구 (Effect on Formation of Liquid Crystal Pitch)

  • 권영배;류해일
    • 한국기계연구소 소보
    • /
    • 통권13호
    • /
    • pp.15-25
    • /
    • 1984
  • The infrared spectra were determined to discover the characteristics and properties of poff-, PV-, and cc-samples, and studied influence on the formation of mesophase or liquid crystal. The experimental results were as follows; a) Samples with long aliphatic side chain appear cracking texture on temperature forming liquid crystal. b) The fine isotropic microstructure appears in a heterogeneous material containing sulfur, 7.18 w%. c) In the size of molecular weight the lighter than 500 form liquid crystal. d) When poff-sample was treated at $400^{\circ}C$ aliphatic hydrocabon compounds decrease, presented well-oriented bulk liquid crystal.

  • PDF

Wavelength Divided Trans-reflective Liquid crystal Displays

  • Yang, D.K.;Zhou, F.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.309-310
    • /
    • 2003
  • We have designed novel transreflective liquid crystal displays which utilize dielectric mirrors. The reflective and transmissive modes are operated in different wavelength regions. The displays have the advantages: (1) the brightness as a function of applied voltage is the same for both modes, (2) the backlight and ambient light are utilized efficiently.

  • PDF

저전력 휴대용 통신단말을 위한 Solution Process를 이용한 고 유전율 Strontium Oxide 배향막의 특성 연구 (Study of Properties of High-K Strontium Oxide Alignment Layer Using Solution Process for Low Power Mobile Information Device)

  • 한정민;김원배
    • 한국위성정보통신학회논문지
    • /
    • 제10권2호
    • /
    • pp.90-94
    • /
    • 2015
  • 본 연구에서는 Solution Process를 적용한 Strontium Oxide를 배향막으로 사용한 경우의 액정배향 특성에 대해서 연구하였다. Stronium Oxide 는 High K 물질로 배향막으로 사용할 경우 임계치 전압을 효율적으로 조절할 수 있는 장점이 있으나, 액정분자와의 배향에 관한 상호관계에 대해서는 많은 연구가 진행되지 않았었다. 0.1~0.4 Mol 롤 농도를 조절한 Strontium Oxide를 Solution Process 로 배향막으로서 제조함으로써, 보다 생산성이 좋은 방법을 제시할 수 있었으며, 재료가 갖는 우수한 특성을 반영한 액정디스플레이의 제조가 가능하였다. 샘플 측정결과 1.447~1.613V 의 임계치 전압특성을 보여주어 기존의 방법으로 제조된 액정디스플레 이와 동등 혹은 우월한 특성을 갖고 있음을 알 수 있었다.

Recent Progress in Advanced LC Mixture Development for TFT LCD

  • Lee, Seung-Eun;Song, Dong-Mee;Kim, Eun-Young;Jacob, Thomas;Czanta, Markus;Manabe, Atsutake;Tarumi, Kazuaki;Wittek, Michael;Hirschmann, Harald;Rieger, Bernhard
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.159-162
    • /
    • 2006
  • We reviewed our recent advances in LC mixture development identifying the new classes of materials to yield LC mixtures with faster switching times and better reliability

  • PDF