• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.147-148
• /
• 1997

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.194-213
• /
• 2022

This study comprehensively reviewed four types of integrated-optic electric-field sensors based on titanium diffused lithium-niobate waveguides: symmetric and asymmetric Mach-Zehnder interferometers, 1×2 directional couplers, and Y-fed balanced-bridge Mach-Zehnder interferometers. First, we briefly explain the crystal properties and electro-optic effect of lithium niobate and the waveguide fabrication process. We theoretically analyzed the key parameters and operating principles of each sensor and antennas. We also describe and compare the design, simulation, implementation, and performance tests: dc and ac characteristics, frequency response, dynamic range, and sensitivity. The experimental results revealed that the sensitivity of the sensor based on the Y-fed balanced bridge Mach-Zehnder interferometer (YBB-MZI) was higher than that of the other types of sensors.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.102-103
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.3
• /
• pp.196-200
• /
• 2009

Lithium niobate ($LN:LiNbO_3$) is a compound of niobium, lithium and oxygen. The characteristics of LN are piezoelectricity, ferroelectricity and photoelectricity, and which is widely used in surface acoustic wave (SAW). To manufacture LN devices, the LN surface should be a smooth surface and defect-free because of optical property, but the LN material is processed difficult b traditional processes such as grinding and mechanical polishing (MP) because of its brittleness. To decrease defects, chemical mechanical polishing (CMP) was applied to the LN wafer. In this study, the suitable parameters such as down force and relative velocity, were investigated for the LN CMP process To improve roughness, the LN CMP was performed using the parameters that were the highest removal rate among process parameters. And, evaluation of optical property was performed by the optical reflectance.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.10-17
• /
• 1998

The characteristics of the lithium niobate single ($LiNbO_3$) crystals grown doped with $Mg^{2+}$ or $Zn^{2+}$ ions, which are well-known as the ions improving the photorefractive resistance of $LiNbO_3$, have been analysed in comparision with those of undoped $LiNbO_3$ crystal. In particular, $Zn^{2+}$ doping was estimated to increase the photorefractive resistance indirectly from the optical and electrical properties. Therefore, the $LiNbO_3$ crystals doped with ZnO could be used for high intensive laser device application.

• Current Optics and Photonics
• /
• v.6 no.3
• /
• pp.323-331
• /
• 2022

Electro-optic modulator (EOM) takes a vital role in connecting the electric and optical fields. Here, we present a heterogeneously integrated EOM based on the lithium niobate-on-insulator (LNOI) platform. The key modulation waveguide structure is a field-enhanced slot waveguide formed by embedding silicon nanowires in a thin-film lithium niobate (LN), which is different from the previously reported LN ridge or etchless LN waveguides. Based on such slot structure, optical mode field area is reduced and enhanced electric field in the slot region can interact well with LN material with high Electro-optic (EO) coefficient. Therefore, the improvements in both aspects have positive effects on enhancing the modulation performance. From results, the corresponding EOM by adding such modulation waveguide structure achieves better performance, where the key half-wave-voltage-length product (V_𝜋L) and 3 dB EO bandwidth are 1.78 V·cm and 40 GHz under the electrode gap width of only 6 ㎛, respectively. Moreover, Lower V_𝜋L can also be achieved. With these characteristics, such field-enhanced waveguide structure could further promote the development of LNOI-based EOM.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.205-209
• /
• 2008

We demonstrated a simple way of evaluating the duty cycle error in periodically polled lithium niobate(PPLN) based on the method of binary phase diffraction grating. To demonstrate this method, -Z face etched PPLN of desired periods were fabricated by the standard electric field poling technique. The etched PPLN was considered as a surface-relief binary phase grating. The diffraction patterns were recorded for different spatial locations along the length of the sample. The experimentally observed efficiencies of the diffracted orders were compared with the theoretically calculated values to estimate the duty cycle error.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.121-122
• /
• 2008

Lithium Niobate (LN:LiNbO3) is a compound of niobium, lithium and oxygen. The characteristics of LN are piezoelectricity, ferroelectricity and photoelectricity, and which is widely used in surface acoustic wave (SAW). To manufacture LN device, the LN surface should be a smooth surface and defect-free because of optical property, but the LN material is processed difficult by traditional processes such as grinding and mechanical polishing (MP) because of its brittleness. To decrease defects, chemical mechanical polishing (CMP) was applied to the LN wafer. In this study, the suitable parameters scuh as pressure and relative velocity, were investigated for the LN CMP process. To improve roughness, the LN CMP was performed using the parameters that were the highest removal rate among process parameters. And, evaluation of optical property was performed by the optical reflectance and non-linear characteristic.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.384-392
• /
• 1997

Potassium lithium niobate(KLN) single crystal for a nonlinear-optic material, which changes the wavelength of lasers, has a ferroelectric tetragonal tungsten bronze structure at room temperature. It has been very hard to get single crystals of good quality due to the cracks during cooling process. In order to investigate the composition change due to the evaporation of solution during the growth, the thermogravimetric analysis was carried out. In atmospheric condition at $1000^{\circ}C$ which is about $10^{\circ}C$ higher than the crystal growing temperature, the weight change was negligible amount of $1.46{\times}10^{-5}$g/($\textrm{cm}^2$hr). By using both the Pt plate as the nucleation site and the slow cooling method with temperature fluctuation, KLN single crystal of good quality of size 1 cm could be obtained. The phase transition temperature was $490^{\circ}C$, which was higher than that reported by other researchers of the other composition. The optical anisotropy due to the absorption of OH-band exists in the range of IR.