• Journal of Advanced Research in Ocean Engineering
• /
• 제4권3호
• /
• pp.115-123
• /
• 2018

This study was carried using the new approach method to design appropriately the Loading Arm length and the alarm setting according to ship movements on Loading and Unloading marine Berth. The quasi-static mooring analysis was performed to estimate 110,000DWT ship's movements based on environmental conditions such as wind, current and wave. The mooring motion of the ship is very important to determine the loading arm scope, and in this case, the operation condition is performed on the ship without considering the damaged condition of the mooring line because the ship movement in case of damage is larger than intact, and all operations are stopped, the loading arm being released due to control system. From the result of mooring analysis, motion displacements, velocities and accelerations were simulated. They were used to simulate the maximum drifting speeds and distances. The maximum drifting speeds were checked to be satisfied within drifting speed limits. The total maximum drifting distances were simulated with alarm steps of the new approach method. Finally, the loading arm envelopes using the total maximum drifting distances were completed. Therefore, it was confirmed that the new approach method for loading arm envelopes and alarm settings was appropriate from the above results. In the future, it will be necessary to perform the further advanced dynamic mooring analysis instead of the quasi-static mooring analysis and to use the precise computer program analysis for various environments and ship movement conditions.

• 한국광학회지
• /
• 제29권3호
• /
• pp.99-103
• /
• 2018

동적 광단층 탄성영상법은 광 결맞음 단층촬영법을 기반으로 하여 위상차에 의해 조직의 기계적 성질 중 하나인 탄성도를 측정하기 위한 기법이다. 광 결맞음 단층촬영법은 마이켈슨 간섭계를 기반으로 한 비침습적 고해상도 단면 촬영기법이다. 본 논문에서는 광단층 탄성영상법을 생체 조직에 적용하기 전에 실행가능성을 판단하고자 강도를 쉽게 구분할 수 있는 지우개, 스펀지, 샤프심으로 샘플을 제작하여 실험을 진행하였다. 샘플에 사인파의 일정한 진동자극을 가하기 위해 압전액추에이터를 샘플의 아래쪽에 위치시켰으며 위쪽에서 광 결맞음 단층촬영법으로 스캔하였다. 깊이마다 횡방향에 대한 변형속도를 힐버트 변환하여 포락선을 검출한 후 포락선의 높낮이를 색깔로 표현하여 이미지 상에서 샘플 내의 상대적인 강도를 비교할 수 있었다. 또한, 샘플단과 참조단 사이의 간섭을 이용하는 것보다 샘플단 내의 자기간섭을 이용할 경우 변형속도 계산에 있어 장점이 있음을 제시하였다.