• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.215-221
• /
• 2010

This paper introduces development of location estimation and navigation system of mobile robots using USN and LEGO Mindstorms NXT. Developed system includes location estimation, location and navigation information display and navigation control parts. It used ZigBee based USN which was built with CC2431 chip to locate blind node and implemented fuzzy model to improve ability of calculation of distances from reference nodes and location of mobile robots. This paper proposed combination method of location estimation using USN and encoder which is built in motors of mobile robots. Experimental results showed proposed method is superior to the method which used USN only in location estimation and navigating robots. Developed system can locate current position of mobile robots and monitor information from sensor nodes like temperature, humidity and send control signal to mobile robot to move.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1083-1094
• /
• 2012

Commercialized location estimation System with high accuracy is widely used for various services. However, if the systems aren't completely installed in an indoor, location estimation accuracy tend to be very poor. In this paper, indoor location estimation algorithm to improve the accuracy of object location, by correcting the location information obtained from a system that does not fully install, is proposed. In this paper, UWB-based Ubisense system that provides high position accuracy in an indoor environment was utilized. In conclusion, this paper was able to improve the positioning accuracy, by correcting that information about the location of the measured object in position estimation system.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.182-196
• /
• 2008

The location estimation using sensor network has been considerably researched. The methods taking the differences of the forms of location estimation between indoors and outdoors into consideration have been studied. While it is possible for outdoor location to be estimated because outdoor location estimation has a consistent distribution during unit period through the value of RSSI(Received Signal Strength Indication) on outdoor location estimation, Indoor location estimation is difficult since multi-path and interference indoors are higher than those outdoors and indoor location estimation can be affected by other factors. In this paper, we revise the information of RSSI changed by multi-path and interference through the Moving Average method and K-means algorithm and propose the method of estimation for the value of RSSI with reliability in the group of signals received during unit period. We also suggest the way to put some weights on fixed nodes in network using a snooping node on location estimation and then evaluate the efficiency of location awareness as compared with the existing method by implementing proposed method on system through the reconfiguration of network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.397-401
• /
• 2006

In this paper, we proposed a high precision location estimation algorithm using an enhanced decision scheme for RTLS and analyzed its performance in point of an average estimation error distance at 2D coordinates searching area, $300m\times300m$ and LOS propagation environments. Also the performance was compared with that of conventional TDOA algorithm according to the number of available reader and received sub-blink. From the results, we confirmed that the proposed location estimation algorithm using an enhanced decision scheme was able to improve an estimation accuracy even in boundary region of searching area. Moreover, effectively reduced an error distance in entire searching area so that increased the stability of location estimation in RTLS. Therefore, we verified that the proposed algorithm provided a more higher estimation accuracy and stability than conventional TDOA.

• Journal of Information Technology Applications and Management
• /
• v.14 no.4
• /
• pp.1-16
• /
• 2007

In the microcell- or picocell-based system the frequent movements of the mobile bring about excessive traffics into the networks. A mobile location estimation mechanism can facilitate both efficient resource allocation and better QoS provisioning through handoff optimization. Existing location estimation schemes consider only LOS model and have poor performance in presence of multi-path and shadowing. In this paper we study a novel scheme which can increase estimation accuracy by considering NLOS environment and other multiple decision parameters than the received signal strength.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.479-491
• /
• 2004

Location information of mobile objects is applied to vehicle tracking, digital battlefields, location based services, and telematics. Their location coordinates are periodically measured and stored in the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the mobile object moving on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function, although the proposed location estimation function uses the small amount of information. The proposed method has an advantage that drops the cost of data storage space and communication for the management of location information of the mobile objects.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.449-452
• /
• 2007

An intelligent robot with RSSI based indoor location estimation function was designed and implemented. A wireless sensor node was attached to the robot to received the location data from the indoor location estimation function. Spartan III was used as the main control device in the mobile robot. The current location data collected from the indoor location estimation system was transferred to the mobile robot and server through Zigbee/IEEE 802.15.4 wireless communication of the sensor node. Once the location data is received, the sensor node senses the direction of the robot head and directs the robot to move to its destination. Indoor location estimation intelligent robot is able to move efficiently and actively to the user appointed location by implementing the proposed obstacles avoidance algorithm. This system is able to monitor real-time environmental data and location of the robot using PC program. Indoor location estimation intelligent robot also can be controlled by executing the instructions sent from the PC program.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.3
• /
• pp.495-508
• /
• 2005

Moving objects are spatiotemporal data that change their location or shape continuously over time. Their location coordinates are periodically measured and stored i3l the application systems. The linear function is mainly used to estimate the location information that is not in the system at the query time point. However, a new method is needed to improve uncertainties of the location representation, because the location estimation by linear function induces the estimation error. This paper proposes an application method of the cubic spline interpolation in order to reduce deviation of the location estimation by linear function. First, we define location information of the moving object on the two-dimensional space. Next, we apply the cubic spline interpolation to location estimation of the proposed data model and describe algorithm of the estimation operation. Finally, the precision of this estimation operation model is experimented. The experimentation comes out more accurate results than the method by linear function.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.5
• /
• pp.195-200
• /
• 2021

In this paper, we propose a method for a mobile robot to estimate a specific location of a service provision target using a beacon-tag for the purpose of providing location-based services (LBS) to users in an indoor environment. To estimate the location, the irregular characteristics and error factors of the received signal strength indicator (RSSI) generated from the beacon are analyzed, and the distance conversion function is derived from the RSSI data extracted by applying a Gaussian filter. Then, the distance data converted from the plurality of beacons estimates an indoor location through a triangulation technique. After that, the improvement in the location estimation is analyzed by applying the temporal confidence reasoning technique. The possibility of providing a LBS of a mobile robot was confirmed through a location estimation experiment for a plurality of designated locations in an indoor environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.737-740
• /
• 2009

In this paper, in order to improve the location estimation error existing in RTLS(Real Time Location Service) system for the mobility individual, we proposed a method of speed-adaptive location estimation that the transmitting signaling period is adaptively changed according to the changing speed of a mobility individual for each location interval. To get the more accurate location estimation values, we analyzed both the location values measured by Hybrid(TDOA and RSSI) method by using AeroScout TM RTLS system and the estimated value obtained from the theoretical calculation by using the Least Squares Method. Finally, we compared the analyzed values with a real location of mobility individual. From the experimental results based on our proposed method, it can be seen that the location estimation error for the real location of a mobility individual can be improved.