• Title/Summary/Keyword: Long distance solution transportation

Search Result 9, Processing Time 0.022 seconds

Life-Cycle Cost Analysis of Solution Transportation Absorption System (LCC 분석에 의한 상온 에너지수송용 흡수식 냉동기(STA)의 경제성 평가)

  • 오민규;이봉진;홍희기;강용태
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.16 no.6
    • /
    • pp.506-513
    • /
    • 2004
  • The objective of this paper is to evaluate the economic performance of latent and sensible energy transportation systems. LCC (Life-Cycle Cost) analysis is a practical method and a guideline for evaluating the economic performance of considered systems during the Life-Cycle Period. By comparing the LCC of alternatives, The most ideal alternative is determined which has the lowest LCC. It is concluded that the cost of STA (Solution Transportation Absorption system) can be reduced by 67% to that of sensible energy transportation for study period with 10 km transportation distance.

Simulation and Cost Estimation of Energy Transportation at Ambient Temperature Using an Absorption System (흡수식을 이용한 상온에너지수송의 모사 및 비용평가)

  • 김성수;오민규;전상현;강용태
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.15 no.12
    • /
    • pp.1028-1034
    • /
    • 2003
  • The objectives of this paper are to study the effect of key parameters on the cycle performance and capacity and to estimate the cost of latent and sensible energy transportation systems. The overall conductance (UA) of each component, the ambient temperature and the absorber inlet temperature are considered the key parameters. It is concluded that COP of the solution transportation using an absorption system (STA) at ambient temperature is 10% higher than that of the conventional sensible system. It is also found that the cost of STA system can be reduced 7.5 times to that of sensible energy transportation for one year of operation with 10 km transportation distance.

Growth of Ice Crystal with Concentration of Surfactant in Water Solution (계면활성제 농도가 빙결정의 입자크기에 미치는 영향)

  • ;稻葉英男
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.26 no.2
    • /
    • pp.240-247
    • /
    • 2002
  • Recently, a thermal energy storage system has been developed actively fur the purpose of saving energy and reducing the peak electrical demand. Especially, ice slurry is a promising working fluid for low temperature energy storage systems. A flow of ice crystals has a large cooling capacity as a result of the involvement of latent heat. However, there are still problems related to the recrystallization of ice crystals for realizing long term storage and long distance transportation. To find improvements fur this, a method for the creation of ice crystals resistant to recrystallization has been proposed and researched by the use of an antifreeze protein (AFP) solution etc. In the present study, it has been investigated the growth of ice crystal in several kinds of water solution added non-ionic surfactant. The results shows that size of ice crystal was smaller with increasing in added surfactant. And ice crystal was not increased with added surfactant.

Type 2 Absorption Cycle to Transport Energy in the Long Distance for District Cooling Application (지역냉방 적용을 위한 LNG냉열 장거리 수송용 제 2종 흡수식 시스템)

  • Cho Young Kyong;Kim Jin-Kyeong;Oh Min Kyu;Kang Yong Tae
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.17 no.3
    • /
    • pp.250-255
    • /
    • 2005
  • The objective of this paper is to develop a new energy transport system for district cooling application by using type 2 absorption cycle. Cold energy from the LNG storage system is utilized as the cooling source of the condenser and the rectifier. The pressures of the system, UAs of the evaporator and the desorber, and the inlet temperatures of the refrigerant to each component are considered as the key parameters. The results show that UA of the evaporator is more dominant parameter on COP than that of the desorber and the optimum system pressure for the demand side is estimated as 525 kPa. For the present system, it is recommended that the refrigerant inlet temperature of the evaporator be lower than $4.3^{\circ}C$ for long-distance transportation. It is concluded that the cold energy from the LNG storage system can be effectively applied to the long-distance transportation system for district cooling application with the type 2 absorption cycle. The optimum operation conditions are also predicted from the parametric analysis.

An Efficient Heuristic to Solve Vehicle Routing Problem for Container Shuttle Service (컨테이너 셔틀 서비스를 위한 차량 경로 문제의 근사적 해법)

  • Shin, Jae-Young;Oh, Sung-Inn;Park, Jong-Won
    • Journal of Navigation and Port Research
    • /
    • v.33 no.8
    • /
    • pp.583-588
    • /
    • 2009
  • Generally, the container road transportation can be divided into three types; short distance, long distance and shuttle transportation. Specially, the shuttle service occurs several amounts of container which is same as O/D pairs. Also container vehicle can be divided into three types according to the chassis types of vehicle; only 20-feet container, only 40-feet container and combined chassis trailer. Combined chassis trailers can load two 20-feet containers or one 40-feet container. This paper deals with Vehicle Routing Problem (VRP) for delivering containers considering shuttle service. This problem is similar to the previously studied Shin and Oh (2008), but the characteristics of shuttle service must be considered additionally. We formulate the container shuttle transportation planning problem using combined chassis trailers based on VRP with pick-up and delivery which can visit each node more than one time, and propose an efficient solution procedure.

Efficient heuristic of vehicle routing problem for container shuttle service (컨테이너 셔틀 서비스를 위한 차랑 경로 문제의 근사적 해법)

  • Shin, Jae-Young;Oh, Sung-Inn;Park, Jong-Won
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2009.06a
    • /
    • pp.171-172
    • /
    • 2009
  • Generally, the container road transportal ion am be divided into three types; short distance, long distance and shuttle transportation. Also container vehicle am be divided into three types according to the chassis types of vehicle; only 20-feet container, only 40-feet container, combined chassis trailer. This paper deals with Vehicle Routing Problem(VRP) for delivering containers considering shuttle transportation. The shuttle service occurs several amounts of container which is same as O/D pairs. This problem is similar to the previously studied VRP for delivering containers using combined chassis trailers, but the characteristics of shuttle service must be considered additionally. We formulate the container shuttle transportation planning problem using combined chassis trailers based on VRP with pick-up and delivery which can visit each node more than one time, and propose an efficient solution procedure.

  • PDF

Experimental Study for Establishment of Long-term Monitoring System using Fiber Optical Sensor for Pipeline System for Waste Transportation (광섬유센서를 이용한 쓰레기 이송관로의 장기 계측시스템 구축을 위한 실험적 연구)

  • Kim, Haeng-Bae;Song, Jae-Ho
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.20 no.4
    • /
    • pp.35-43
    • /
    • 2016
  • Recently, the pipeline system for waste transportation has been increasingly constructed as new solution for the waste collection and disposal system by constantly increasing domestic waste which issued as social problem. The pipeline system is constructed through long distance, so proper long-term monitoring system is necessary which available to detect the damage location for the effective maintenance. In this paper, the experimental study is carried out to evaluate the applicability of optical strain gauge sensor based on FBG for the long-term monitoring system. Three test parameters such as pressure leaking, blockage and deformation are considered as typical damages for real-scale pipeline test specimen. In order to measure flexural and volumetric strain and temperature, three FBG sensors are installed at each monitoring sections. From the test results, this study suggested effective methods of sensor installation and arrangement. Also the sensor spacing for the design of monitoring system using FBG sensor is derived by the correlation of distances from deformation between sensor responses.

An Analysis of the Causes of the Welfare Gain Achieved by Congestion Pricing and Transit Subsidies (혼잡통행료와 대중교통 보조금의 효용개선 원인 분석)

  • Rhee, Hyok-Joo;Yu, Sang-Gyun
    • Journal of Korean Society of Transportation
    • /
    • v.31 no.3
    • /
    • pp.74-85
    • /
    • 2013
  • We analyze the efficiency of congestion pricings and transit subsidies in the spatial micro-economic model based on a general equilibrium environment. In this setting, we decompose the total welfare change into component factors and identify the reason of the change in the efficiency caused by policy instruments; these component factors are divided into indirect factors and direct factors including of origin-destination and mode choices. We set up the model as adding mode choice to the standard format in the fashion of Anas and Kim (1996) and extend the methodology proposed by Yu and Rhee (2011) and Rhee (2012) for deriving theoretical and analytical solution. Most of welfare gain comes from the modal shift from car to bus. The relative efficiency of subsidies in relation to the first-best pricing is lower than it of congestion pricings although the change in bus share by subsidies is similar to it by congestion pricing. Subsidies give rise to more modal shift from a car to a bus for long-distance commuting than it caused by congestion pricings. As the increase of bus share for long-distance commuting leads to the increase of cross-commuters passing through CBD, the welfare gain by subsidies is lower than it by congestion pricings.

Assessment of the Cause and Pathway of Contamination and Sustainability in an Abandoned Mine (폐광산 오염원인 분석 및 오염경로, 향후 지속가능성에 대한 평가)

  • Kim, Min Gyu;Kim, Ki-Joon;Jeong, Gyo-Cheol
    • The Journal of Engineering Geology
    • /
    • v.28 no.3
    • /
    • pp.411-429
    • /
    • 2018
  • Daeyoung mine (also called "Daema mine") produced gold and silver from mainly gold- and silver-bearing quartz veins. The mine tailings are a waste hazard, but most of the tailings were swept away or dispersed throughout the area around the mine long before the tailing dump areas were transformed into agricultural land. Soil liner and protection facilities, such as retaining walls, were constructed in the mine area to prevent the loss of tailings. The content of the tailings is 3,424.41~3,803.61 mg/kg, which exceeds the safety standard by a factor of 45. In addition, contamination was detected near agricultural areas and in the sediments in downstream drainage channels. A high level of As contamination was concentrated near the waste tailings yard; comparaable levels were detected in agricultural areas close to streams that ran through the waste dump yard, whereas the levels were much lower in areas far from the streams. The contamination in stream sediments showed a gradual decrease with distance from the mine waste yard. Based on these contamination patterns, we concluded that there are two main paths that affect the spread of contaminants: (1) loss of mine waste, and (2) the introduction of mine waste into agricultural areas by floods after transportation by streams. The agricultural areas contaminated by mass inflow of mine waste can act as contamination sources themselves, affecting other agricultural areas through the diffusion of contaminants. At present, although the measured effect in minimal, sediments in streams are contaminated by exposed mine waste and surface liners. It is possible for contaminants to diffuse or spread into nearby areas if heavy elements trapped in soil grains in contaminated agricultural areas leach out as soil solution or contaminant particles during diffusion into the water supply.