• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.493-495
• /
• 2004

In this paper, shows a research in accordance with the design the implementation of the localization system for mobile robot using INS(Inertial Navigation System) and GPS(Global Positioning System). First, a Strapdown Inertial Navigation System : SDINS is designed and implemented for low speed walking robot, by modifying Inertial Navigation System which is widely used for rocket, airplane, ship and so on. In addition, thesis proposes the localization of robot with the method of loosely coupled method by using Kalman Filter with INS/GPS integrated system to utilize assumed position and steed data from GPS.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.470-478
• /
• 2019

Because the global positioning system (GPS) is not available in underwater environments, an inertial navigation system (INS)/doppler velocity log (DVL) integrated navigation system is generally implemented. In general, an INS/DVL integrated system adopts a loosely coupled method. However, in this loosely coupled method, although the measurement equation for the filter design is simple, the velocity of the body frame cannot be accurately measured if even one of the DVL transducer signals is not received. In contrast, even if only one or two velocities are measured by the DVL transducers, the tightly coupled method can utilize them as measurements and suppress the error increase of the INS. In this paper, a filter was designed to regenerate the measurements of failed transducers by taking advantage of the tightly coupled method. The regenerated measurements were the normal DVL transducer measurements and the estimated velocity in RPM. In order to effectively estimate the velocity in RPM, a filter was designed considering the effects of the tide. The proposed filter does not switch all of the measurements to RPM if the DVL transducer fails, but only switches information from the failed transducer. In this case, the filter has the advantage of being able to be used as a measurement while continuously estimating the RPM error state. A Monte Carlo simulation was used to determine the performance of the proposed filters, and the scope of the analysis was shown by the standard deviation ($1{\sigma}$, 68%). Finally, the performance of the proposed filter was verified by comparison with the conventional tightly coupled method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.186-196
• /
• 1999

The CPS provides data with long-term stability independent of passed time and the INS provides high-rate data with short-term stability. By integrating these complementary systems, a highly accurate navigation system can be achieved. In this paper, a loosely-coupled GPS/INS integration system is designed. It is a simple structure and is easy to implement and preserves independent navigation capability of GPS and INS. The integration system consists of a NCU, an IMU, a GPS receiver, and a monitoring system. The navigation algorithm in the NCU is designed under the multi-tasking environment based on a real-time kernel system and the monitoring system is designed using the Visual C++. The integrated Kalman filter is designed as a feedback formed 15-state filter, in which the states are position errors, velocity errors, attitude errors and sensor bias errors. The van test result shows that the integrated system provides more accurate navigation solution then the inertial or the GPS-alone navigation system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.3
• /
• pp.269-275
• /
• 2001

In land navigation applications, two kinds of GPS/DR integration schemes are commonly used; the loosely-coupled integration scheme and the tightly-coupled one. The loosely-coupled integration filter has a simple structure and is easy to implement. When the number of visible satellites is insufficient, however, it cannot calibrate the errors of the DR sensors. On the contrary the tigthly-coupled integration filter can sup-press the growth of the error in the DR output even when the visibility is poor. However, it has larger com-putation load due to the state dimension and is inconsistent because of the variation in the measurement dimension. This paper presents a GPS/DR integration scheme with dual integration mode. During when the number of visible satellites is sufficient, the proposed scheme operates in a loosely-coupled integration mode. When the visibility becomes poor, it is switched into a tightly-coupled integration mode. Consequently, the pro-posed scheme can calibrate the DR sensors even when the visibility is poor. In addition, its computation time remains constant even if the number of visible satellites increases. Field experiment results show that the performance of the proposed integration method is almost similar to that of the tightly-coupled one.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.822-825
• /
• 1999

This paper compares two methods of GPS/INS integration ; tightly-coupled integration ana loosely-coupled integration. In the tightly -coupled method an integrated Kalman filter is designed to process raw GPS measurement data for state update and INS data for propagation. The loosely-coupled integration method uses the solution outputs from a stand-alone GPS receiver for update. The loosely-coupled method is simpler and can readily be applied to off-the-self receivers and sensors while the tightly-coupled integration requires access to raw measurement mechanism of the receiver. Simulation result show that the tightly-coupled integration system exhibits better performance and robustness than loosely-coupled integration method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.785-791
• /
• 2008

Ultra-tightly coupled GPS/INS integration has been reported to show better navigation performance than that of other integration methods such as loosely coupled and tightly coupled integration. This paper uses the particle filter for ultra-tightly coupled GPS/INS integration and analyzes the navigation performance according to vehicle trajectory and the number of particles. The navigation performance of particle filter is compared with those of EKF and UKF.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.267-275
• /
• 2013

EKF has been widely used for GPS/INS integration as standard method but EKF has one well-known drawback. if the errors are not within the bounded region, the filter may be divergent. The particle filter has the advantage of the nonlinear and non-gaussian system. This paper proposes a method for compensating the GPS position errors based on the particle filter and presents loosely-coupled GPS/INS integration using proposed algorithm. We used GPS position pattern with particle filter and added attitude kalman filter for improving attitude accuracy. To verify the performance, the proposed method is compared with high cost GPS as reference. In the experimental result, we verified that the accuracy and robust were well improved by the proposed method filter effectively and robustness than by original loosely-coupled integration when vehicle turns at corner.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.281-290
• /
• 2021

For successful operations of an airborne Active Electronically-Scanned Array (AESA) radar, which has various advantages over traditional radar systems, accurate and robust navigation is critical. This paper discusses a study on the performance analysis of an integrated navigation based on the Embedded GPS/INS (EGI) system for an aircraft equipped with an AESA radar. The models for generating the inputs for the GPS/IMU are developed. A navigation filter for a loosely-coupled GPS/IMU system is constructed. Overall navigation performance assessment procedure using a six degree of freedom aircraft simulator - along with the GPS/IMU models and the navigation filter - is introduced. The steps of the performance analysis procedure are explained using a comprehensive case study.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2433-2435
• /
• 2000

Inertial Navigation System(INS) provides short-term accurate navigation solution but its error grows with time due to integration characteristics. Meanwhile, Global Positioning System(GPS) provides long-term stable solution but it has poor error characteristics in high dynamic region. So for its synergistic relationship, an integrated INS/GPS systems has been widely used as an advanced navigation system. Generally, two kinds of integration method are used. One is loosely coupled mode which uses GPS-derived position and velocity as measurements in an integrated Kalman filter. The other is tightly coupled one which uses pseudorange and pseudorange rate as Kalman filter measurements. In this paper the system error models and observation models for two kinds of integrated systems are derived, respectively, and their performance are compared through Monte-Carlo simulations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.189-198
• /
• 2019

In recent years, visual-inertial odometry(VIO) algorithms have been extensively studied for the indoor/urban environments because it is more robust to dynamic scenes and environment changes. In this paper, we propose loosely coupled(LC) VIO algorithm that utilizes the velocity vectors from both visual odometry(VO) and inertial measurement unit(IMU) as a filter measurement of Extended Kalman filter. Our approach improves the estimation performance of a filter without adding extra sensors while maintaining simple integration framework, which treats VO as a black box. For the VO algorithm, we employed a fundamental part of the ORB-SLAM, which uses ORB features. We performed an outdoor experiment using an RGB-D camera to evaluate the accuracy of the presented algorithm. Also, we evaluated our algorithm with the public dataset to compare with other visual navigation systems.