• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2271-2272
• /
• 2008

Recently, LDPC codes received a lot of attention in 4G. LDPC codes perform good error correction at high SNR. But LDPC codes are complex design and not good at low SNR. At low SNR, convolution codes and turbo codes show more good performance than LDPC codes. The main subject presented in this study is that parallel encoding and decoding according to SNR. The system chooses convolution codes at low SNR and chooses LDPC codes at high SNR.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2E
• /
• pp.62-68
• /
• 2003

This paper addresses a novel noise-compensation scheme to solve the mismatch problem between training and testing condition for the automatic speech recognition (ASR) system, specifically in car environment. The conventional spectral subtraction schemes rely on the signal-to-noise ratio (SNR) such that attenuation is imposed on that part of the spectrum that appears to have low SNR, and accentuation is made on that part of high SNR. However, these schemes are based on the postulation that the power spectrum of noise is in general at the lower level in magnitude than that of speech. Therefore, while such postulation is adequate for high SNR environment, it is grossly inadequate for low SNR scenarios such as that of car environment. This paper proposes an efficient spectral subtraction scheme focused specifically to low SNR noisy environment by extracting harmonics distinctively in speech spectrum. Representative experiments confirm the superior performance of the proposed method over conventional methods. The experiments are conducted using car noise-corrupted utterances of Aurora2 corpus.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.139-146
• /
• 2009

This paper addresses a modified spectral subtraction schemes which is suitable to speech recognition under low signal-to-noise ratio (SNR) noisy environment such as the automatic speech recognition (ASR) system in car. The conventional spectral subtraction schemes rely on the SNR such that attenuation is imposed on that part of the spectrum that appears to have low SNR, and accentuation is made on that part of high SNR. However, such postulation is adequate for high SNR environment, it is grossly inadequate for low SNR scenarios such as that of car environment. Proposed methods focused specifically to low SNR noisy environment by using weighting function for enhancing speech dominant region in speech spectrum. Experimental results by using voice commands for car show the superior performance of the proposed method over conventional methods.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.278-285
• /
• 2010

The difference between training and test environments is one of the major performance degradation factors in noisy speech recognition and many silence feature normalization methods were proposed to solve this inconsistency. Conventional silence feature normalization method represents higher classification performance in higher SNR, but it has a problem of performance degradation in low SNR due to the low accuracy of speech/silence classification. On the other hand, cepstral distance represents well the characteristic distribution of speech/silence (or noise) in low SNR. In this paper, we propose a Cepstral distance and Log-energy based Silence Feature Normalization (CLSFN) method which uses both log-energy and cepstral euclidean distance to classify speech/silence for better performance. Because the proposed method reflects both the merit of log energy being less affected with noise in high SNR and the merit of cepstral distance having high discrimination accuracy for speech/silence classification in low SNR, the classification accuracy will be considered to be improved. The experimental results showed that our proposed CLSFN presented the improved recognition performances comparing with the conventional SFN-I/II and CSFN methods in all kinds of noisy environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4573-4584
• /
• 2015

The traditional feature extraction algorithms for recognition of communication signals can hardly realize the balance between computational complexity and signals' interclass gathered degrees. They can hardly achieve high recognition rate at low SNR conditions. To solve this problem, a novel feature extraction algorithm based on Holder coefficient was proposed, which has the advantages of low computational complexity and good interclass gathered degree even at low SNR conditions. In this research, the selection methods of parameters and distribution properties of the extracted features regarding Holder coefficient theory were firstly explored, and then interval gray relation algorithm with improved adaptive weight was adopted to verify the effectiveness of the extracted features. Compared with traditional algorithms, the proposed algorithm can more accurately recognize signals at low SNR conditions. Simulation results show that Holder coefficient based features are stable and have good interclass gathered degree, and interval gray relation classifier with adaptive weight can achieve the recognition rate up to 87% even at the SNR of -5dB.

• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.219-225
• /
• 2015

This study aims to evaluates the image quality of CR and DR that are scanned with the use of the attachable carbon heater X-ray scanner table equipped with heating device by measuring SNR and CNR before and after the attachment of the said table. In the aluminum staircase testing, CR increased SNR and CNR when attached with the table, while DR decreased SNR and CNR. In the human-body model phantom testing, CR increased SNR and CNR only in the low-energy low-dose radiation and the high-energy high-dose radiation, but decreased SNR and CNR under all other conditions. In conclusion, the use of such table can make the patient feel comfortable by removing his or her anxiety, thus helping the testing, but in the actual clinical application thereof, if the thickness and material of the bottom film and the protective film, including the carbon heater, are not considered, it affects the picture quality, thereby requiring continuous research on the use of such table.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.81-88
• /
• 2018

Spectrum sensing, the key technology of the cognitive radio networks, is used by a secondary user to determine the frequency state of a primary user. The energy detection in the spectrum sensing determines the presence or absence of a primary user according to the intensity of the allocated channel signal. Since this technique simply uses the strength of the signal for spectrum sensing, it is difficult to detect the signal of a primary user in the low SNR band. In this paper, we propose a way to combine spectrum sensing and support vector machine using wavelet packet decomposition to overcome performance degradation in low SNR band. In our proposed scheme, the sensing signals were extracted by wavelet packet decomposition and then used as training data and test data for support vector machine. The simulation results of the proposed scheme are compared with the energy detection using the AUC of the ROC curve and the accuracy according to the SNR band. With simulation results, we demonstrate that the proposed scheme show better determining performance than one of energy detection in the low SNR band.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.4
• /
• pp.215-223
• /
• 2016

Purpose: The management of metal-induced field inhomogeneities is one of the major concerns of distortion-free magnetic resonance images near metallic implants. The recently proposed method called "Slice Encoding for Metal Artifact Correction (SEMAC)" is an effective spin echo pulse sequence of magnetic resonance imaging (MRI) near metallic implants. However, as SEMAC uses the noisy resolved data elements, SEMAC images can have a major problem for improving the signal-to-noise ratio (SNR) without compromising the correction of metal artifacts. To address that issue, this paper presents a novel reconstruction technique for providing an improvement of the SNR in SEMAC images without sacrificing the correction of metal artifacts. Materials and Methods: Low-rank approximation in each coil image is first performed to suppress the noise in the slice direction, because the signal is highly correlated between SEMAC-encoded slices. Secondly, SEMAC images are reconstructed by the best linear unbiased estimator (BLUE), also known as Gauss-Markov or weighted least squares. Noise levels and correlation in the receiver channels are considered for the sake of SNR optimization. To this end, since distorted excitation profiles are sparse, $l_1$ minimization performs well in recovering the sparse distorted excitation profiles and the sparse modeling of our approach offers excellent correction of metal-induced distortions. Results: Three images reconstructed using SEMAC, SEMAC with the conventional two-step noise reduction, and the proposed image denoising for metal MRI exploiting sparsity and low rank approximation algorithm were compared. The proposed algorithm outperformed two methods and produced 119% SNR better than SEMAC and 89% SNR better than SEMAC with the conventional two-step noise reduction. Conclusion: We successfully demonstrated that the proposed, novel algorithm for SEMAC, if compared with conventional de-noising methods, substantially improves SNR and reduces artifacts.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.975-981
• /
• 2012

The SNR estimation performance of hierarchical 16QAM system, which is adopted to simultaneous transmission or efficient image transmission system, is analyzed. Hierarchical 16QAM is modulation system which has different constellation shape from conventional QAM and can provide users with high quality and low quality of data services simultaneously by controlling hierarchical modulation parameter. Assuming AWGN channel, SNR estimation performance characteristics are investigated considering hierarchical modulation parameter and type of constellation points. From simulation results, it is found that constellation point showing superior SNR estimation performance relative to other points is exist. Also, it is known that according to hierarchical modulation parameter, SNR estimation range with more accurate estimation performance is divided.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.400-410
• /
• 1988

In this paper, a fast synchronization system using SAW TDL matched filter and SAW recirculation loop not only for acquisition but also tracking in the direct sequence spread spectrum communication receiver in case of low SNR was designed and its characteristics were investigated. When signal of 16dB SNR was inputed at the receiver, the PN code of the receiver could be synchronized from the extracted signal for synchronization through SAW TDL matched filter and SAM recirculation loop for 30 recirculations. And the average synchronization time of this system was calculated. From the results, we found that this synchronization system could achieve faster synchronization of PN codes in the receiver under the circumstances of low SNR than that of using only matched filter.