• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.344-347
• /
• 1995

The standard estimation and filtering theory are well known and has recently been incorporated with the H$_{\infty}$ optimization techniques where the parametrizations of all estimators and filters are utilized. The issue of reducing its order is always of interest. This paper presents a method for synthesizing low-order stable state estimators. The method presented in this paper is based on the utilization of a free parameter function contained in the parametrization of all state estimators. The results obtained in the paper are compared with standard results on low-order estimators. Both results are shown to be the same in a sense of its orders, but the approaches taken are largely different. It is also shown in the paper that the method can easily and directly be extended to the Kalman filters and the H$_{\infty}$ (sub)optimal filters. Consequently, the orders of all state estimators, Kalman filters, and H$_{\infty}$ filters are shown to be reduced down to the number of states minus the number of outputs, respectively.ly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.420-422
• /
• 1998

In this paper, we propose a position-speed control of servo system with a state estimator. And also we utilized two mass modelling in order to deals with real system accurately. The overall control system consists of two parts: the position-speed controller and state estimator. The Kalman filter applied as state - feedback controller is an optimal state estimator applied to a dynamic system that involves random perturbations and gives a linear,unbiased and minimun error variance recursive algorithm to estimate the unknown state optimally. Therefore we consider the error problem about the servo system modelling, the measurement noise at low-speed ranges a stochastic system, and implement a optimal state observer. Performance of the proposed state estimator are demonstrated by computer simulations.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1053-1059
• /
• 2007

This paper presents a target sate estimator(TSE) with low pass filter for improving the gun driving command. The ballistic computer uses target information such as predicted range, velocity, acceleration of a target to generate the gun command. We adopt the finite impulse response(FIR) filter as our TSE to shorten calculation time for the driving command and due to its inherent stability property. We also introduce a post-processing filter to reduce the high frequency components in the output signal of a TSE which may cause instability of gun driving. The first order low pass filter has been designed based on $H{\infty}$ criteria considering the noise characteristics. To show the validity of the present scheme, simulation results are given for the overall gun driving system including aircraft target information.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.246-253
• /
• 2013

본 논문에서는 유동의 안정된 흐름 제어를 위한 유동제어에 대해 다룬다. 전산유체역학 해석을 통해 제공된 대용량의 유동 데이터를 POD 방법을 통하여 축약하고, 제어측면에서 시간 및 주파수 영역에서의 분석에 근거하여 적절한 수준의 저차 모델링한다. 한편, 유동장 표면에 부착된 압력센서로부터 공간상의 유동상태 추정을 위해 신경망 구조를 갖는 유동추정기를 구성하고, 되먹임 유동제어기를 설계함으로써 유동제어루프를 구성한다.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.168-180
• /
• 2018

In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.

• 대한의용생체공학회:의공학회지
• /
• 제6권1호
• /
• pp.5-12
• /
• 1985

In this paper Kalman filtering technique is applied to ultrasound signal to improve resolution capability, Ivhlch is in use of diagnostic imaging systems. The main advantage of Kalman filter algorithm for the analysis of reflected ultrasound signal is its recursive structure which can be easily adapted to tlme varing system. Because soft-tissues, such as liver, act as distributed acoustic low-pass filters which continually change the propagating pulse. tIne can put to practical use above advantage to find a suitable signal generallng model. In state-space description of the system, the 6th order system produces tl)e 1)esc spectral approximation to the source pulse As a result of spectrum analysis, 6th order estimator for two closely spaced ((p.5 mm) reflectors enhances resolution by 4dB-lOdB. By using this result, the possibility to detect even minute tumor is demonstrated.