• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.60-66
• /
• 2011

There are several technological problems have to be resolved for LEDs to be used as a general purpose light source. In addition, there are several differences between existing luminaires and the general planer LED luminaire for the intensity distribution. Therefore, the optical engineer then faces the challenging a problem of designing for a spatially extended and non-uniform light source. In the previous studies on the optical design of luminaires, a lot of studies on reflectors and light source have been conducted but the ones on prisms and lenses are insufficient at present. This study developed the numerical model of planar prism LED luminaire to control luminous intensity distribution of LED luminaires. And this study presents an optical calculation process for the prism optical design of a planar prism LED luminaire and a comparison of the simulation results between the developed numerical model and Photopia 2.0 to verify the accuracy of the numerical model. In addition, this study showed a method for the control of various luminous intensity distribution from the developed numerical model.

• 조명전기설비학회논문지
• /
• 제17권5호
• /
• pp.1-7
• /
• 2003

배광분포를 측정함으로써 조명기구의 모든 광학적 특성을 계산해낼 수 있으며 이를 바탕으로 조명설계를 수행할 수 있다. 이러한 일련의 측정과 해석을 위해 배광측정기의 개발시에 배광해석용 소프트웨어 개발이 동시에 이루어져야 한다 연구진이 현재 개발하고 있는 소프트웨어는 조명기구의 광학적 특성을 파악하는 데 있어, 상당히 유용한 기능들을 포함하고 있다. 또한, 조명설계에 있어 근본적인 문제 해결의 과학적 검증을 제공함은 물론, 더 나아가 조명계산에 있어 하나의 표준을 마련하는 데 기여할 수 있을 것으로 보인다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.71-75
• /
• 2002

The prismatic luminaire named as a dome pendent is considered to save energy and improve visibility. This luminaire is using prismatic rome, and is designed to be used in commercial and industrial high-bay applications where quality light levels and energy savings are imperative. Although this kind of luminaire needs an accurate optic calculation process, the lumanires are manufactured without such a process. Therefore the purpose of this study is to develop a numerical model to accurately predict luminous intensity distribution of luminaire with prism.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.18-25
• /
• 2014

In this paper, tried to find out the proper luminous intensity distribution for the cabin with low-level height by analyzing the changing tendency of discomfort glare according to luminous intensity distribution of marine indoor luminaires using Unified Glare Rating(UGR). First, we analyzed UGR of the indoor luminaires in the existing cabin, and then evaluated influence on luminous intensity distributions of marine indoor luminaire. The results showed that $cos^2{\Theta}$ distribution got almost low UGR results regardless of height and UGR 16.5 in cabin height of 2m. However, Gaussian distribution with the same beam angle showed that UGR results consistently increased by getting lower height and UGR 20.7 in the same height. In conclusion, the $cos^2{\Theta}$ distribution in consideration of luminous intensity on the direction of observer's eye was appropriate for general cabin indoor luminaires because it decreased UGR in the low-level height.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.19-25
• /
• 2007

특정한 배광 구현을 위하여 부피를 갖는 실제 광원에 대한 프리즘 설계법을 연구하였다. 입사각을 알고 목표 방향으로 광선을 보내려 할 때, 프리즘 정각을 구하는 수식을 유도하였고, 순차적으로 프리즘 정각을 구하였다. 점광원으로 가정한 설계 결과의 문제점을 분석한 후 이를 보완하여 부피를 갖는 광원에 적용할 수 있는 설계법을 도출하였다. 각각의 설계 결과로 나온 배광과 효율을 비교, 분석하였고 보완된 설계법을 통해 개선된 결과를 얻을 수 있었다.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.47-52
• /
• 2013

The problems of light pollution first became an issue in the 1970s when astronomers identified the degradation of the night sky due to the increase in lighting associated with development and growth. As more impacts to the environment by lighting have been identified, many attempts have been made for reducing light pollutions. To prevent light pollution and increase energy efficiency, Seoul Metropolitan Government(SMG) replaced metal halide road lighting to LED luminaire in four arterial highway in Seoul. The present study compared the lighting characteristics of metal halide and LED luminaire in terms of Korea Standard for road lighting(KS A 3701) and BUG rating from Illuminating Engineering Society of North America(IESNA). The results showed that LED luminaire increased road surface luminance up to 2 times in average compared to the metal halide environment. Also, LED luminaire reduced the glare value by 2 times and luminous flux over 50% than the metal halide luminaire. In comparison with the BUG ratings, LED luminaire rated 1 degree lower for the backlight ratings and 3-4 degrees lower for the uplight ratings. The measured values testified that the LED luminaire is effective for roadway lighting and light pollution reduction.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.15-18
• /
• 2004

Recently, the eletrodeless lamp is introduced as a new light source of a high efficacy and long life. Although eletrodeless lamp's size is large, most of them is applied to general luminaire for HID lamps. It causes to decrease eletrodeless lamp's efficacy. Therefore, refractor luminaires can be an option to maintain efficacy, so that reflector luminaires are developed for such lamps. The purpose of this study is to develope a optical numerical model of planar prism luminaire that is able to obtain various luminous intensity distributions.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.10-17
• /
• 2001

공간의 효율적 조명시스템의 설계를 위해서는 그 공간의 물리적 조건들과 작업의 내용 등을 고려하여 표준적인 상황을 규정하고, 그 상황에서 가장 유용한 조명설계를 찾아내어 표준화해야 한다. 특히, 인텔리전트 빌딩에서는 OA도입으로 인한 W 작업환경, 취업인구의 고령화 등의 공간특성을 고려한 조명계획이 요구되며 이러한 조명계획을 구현할 수 있는 조명기구를 제작할 필요가 있다. 따라서 이 연구에서는 국내 인텔리전트 빌딩의 주요 공간별 크기와 형태 및 특성을 조사하여 표준공간을 선정했고, 이를 반사판설계에 반영하여 3 가지 형태의 형광 등기구를 설계, 분석하였다.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.43-50
• /
• 2010

The purpose of this study is to propose a simulation approach which compares lighting quality of each luminaire type for small urban park users' safety. For improving illumination quality, lighting intensity distribution of a luminaire is one of the important factors and it is also important to set the luminaire to a proper position. To achieve the best plan for illumination, it is most important to communicate the plan with designers of park and professional engineers in depth and the communication continues from the beginning of the plan.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.37-42
• /
• 2003

Development of light sources has been constantly grown after incandescent lamps had been invented by Thomas Edison. Recently, the eletrodeless lamp is introduced as a new light source of a high efficacy and long life. But, despite of such advantages, luminaires of electrodeless lamps are not widely used. It is necessary to develope the design of the luminaire together with light source development. In this paper, design algorithm of the luminaire that is adaptable to electrodeless lamp and use Genetic Algorithm as a optimization method to find luminous intensity distribution required is introduced.