• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.191-193
• /
• 2002

최근, 전기품질에 관한 중요성과 EMI에 의한 규정이 강화되면서 PFC 컨버터에 관한 연구가 많이 이루어지고 있다. 본 연구에서는 matlab을 활용하여 3상 PFC 컨버터를 효율적으로 시뮬레이션하는 연구를 수행한다. 단위역률을 위한 3상 컨버터 PFC 제어는 링크전압제어부, 전류제어부, SVPWM 제어부로 구성된다. 3상 PFC 컨버터를 matlab/simulink로 구성하여 시뮬레이션을 수행한 결과. 상전압과 상전류의 위상이 일치하여 단위역률이 잘 실현됨을 나타내고 있다. 본 연구는 PFC 컨버터의 설계 및 유사회로의 시뮬레이션에 유용하게 활용될 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.307-309
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation system that has induction generator, and aims to perform simulations for outputs by the variation of actual wind speed and for fault current of wind generation system by the transformer winding connection. This study is implemented by matlab&simulink. The simulation shall be performed by assuming single line to ground fault generated in the system. Generator power, generator rotor speed, generator terminal current and fault current shall be observed following the performance of simulation. The fault current change will be dealt through the simulation results for fault current of wind generation system following the grid-connected transformer winding connection and the simulation result by the transformer neutral ground method.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1022-1023
• /
• 2006

본 논문에서는 MATLAB/SIMULINK와 dSPACE DS1104보드를 이용하여 유도전동기의 간접백터제어 알고리즘을 구현하였다. 유도전동기의 간접벡터제어를 위한 전체 시스템 모델은 SIMULINK 그래픽 모델과 dSPACE DS1104 R&D Control 보드의 Real Time Interface(RTI)를 이용하여 구현한 후에 실험을 수행하였다. 벡터제어를 위해서 전동기 전류의 측정은 16kHz로 측정하였고, 측정된 전류를 이용하여 8Hz로 전류제어기, 4kHz로 속도제어기를 구현하였다. MATLAB과 dSPACE 보드의 컴파일러가 설계된 그래픽 모델의 C source 파일과 object 파일을 자동으로 생성시켜주기 때문에 추가적인 프로그램의 coding 없이 실제 시스템의 시뮬레이션과 실험을 동시에 수행할 수 있으며 원하는 제어성능을 얻을 수 있다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1027-1028
• /
• 2006

In this paper, design of current and speed controller for DC motor drive system using Embedded Target for TI C2000DSP in Matlab/Simulink is introduced. Current and speed controller is designed and implemented using program simply and easily, and speed control response of DC motor can be advanced. Current and speed control of DC motor is carried in eZdsp F2812 control board using Embeded Target for TI C2000DSP in Matlab/Simulink. Speed feedback is processed through A/D converter using tacho generator as speed sensor, and current feedback is processed through A/D converter using hall sensor as current sensor. Controller is designed to PI current controller and PI speed controller. Current and speed response is verified through simulations and experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.655-660
• /
• 2010

As increasing the number of Electronic Control Units in a vehicle, the proportion for reliability and stability of the software is going increasingly. Accordingly, the traditional CAN network has occurred the situation that the requirement of developing vehicle software is not sufficient. To solve these problems, the FlexRay network which is ensured the high bandwidth and real-time is generated. However it is difficult to implement FlexRay based application software because of complex protocol than traditional CAN network. Accordingly the system for analysis and verification of network state is needed. Also vehicle vendor develops application software using Matlab/Simulink in order to increase productivity. But this development method is hard to solve the network problem of node to node. Therefore this paper implements Matlab/Simulink based FlexRay network system and verifies it through comparing with existing embedded system.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.163-168
• /
• 2007

For an accurate computer simulation to motor drive systems, the target mechanical load system driven by a motor needs to be model its characteristics accurately. In general, a load system is modeled simply with system parameters such as approximated system inertia and friction. So, simulation results have some errors compared with experimental results for a real load system. RecurDyn is a mechanics simulation program for 3-dimension analysis to mechanical load systems. From this program, parameters such as a load torque, a system inertia and a viscous friction can be obtained accurately which are required to model a mechanical system. Also, this program operates together Matlab/Simulink which is used to simulate electrical motor drive systems. So, an accurate simulation for the whole system with a motor drive system and a mechanical load is possible. This paper introduces an application of RecurDyn program to an electric forklift drive system using IPMSM(Interior Permanent Magnet Synchronous Motor) and examines the feasibility of co-simulation it with Matlab/Simulink.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.25-32
• /
• 2010

A geortor type pump is widely used in lubrication and actuator systems. Especially the pump is an essential machine element of an automotive engine to feed lubrication oil and power source of automatic transmission. A gerotor is a planar mechanism consist of a pair of rotor and circular tooth of stator assembly which forms a closed space. However, related industries do not have necessary technology to design and optimize the pump and paid royalties of gerotor profile on an advanced company. Also, gerotor profiles with setting design parameter have not been sufficiently analyzed from a theoretical view. Therefore, it is very difficult for designer to decide the specifications of the gerotor profiles, and calculation and fluctuation of flow rate is not yet confirmed. In this study, theoretical analyses and optimal design of the gerotor profiles have been performed numerical method by mathematical base. An automated design system of the tooth profile has been developed through MATLAB GUI Program considering various design parameters.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.18-29
• /
• 2014

This paper proposes the integration of photovoltaic (PV) and energy storage systems for sustained power generation. In this proposed system, whenever the PV system cannot completely meet load demands, the super capacitor provides power to meet the remaining load. A power management strategy is designed for the proposed system to manage power flows between PV array systems and supercapacitors (SC). The main task of this study was to design PV systems with storage strategies including MPPT with direct control and an advanced DC-link controller and to analyze dynamic model proposed for a PV-SC hybrid power generation system. In this paper, the simulation models for the hybrid energy system are developed using Matlab/Simulink, SimPowerSystems and Matlab/Stateflow tool. This is the key innovative contribution of the research paper. The system performances are verified by carrying out simulation studies using practical load demand profile and real weather data.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.400-402
• /
• 2007

This paper presents a vector control implementation for PMSM using Real Time Workshop and Embedded Target for TI C2000 DSP in MATLAB/SIMULINK. Speed, current and vector controllers are easily designed and implemented by using the MATLAB/SIMULINK program. Feedback of motor speed is processed through C28x QEP(Quadrature Encoder Pulse) block from encoder pulse. 3-Phase currents ares processed through C28x ADC block from current sensors. And gating signal of PWM inverter is generated through SVPWM and PWM block. Real-time program is drawn using SIMULINK and then converted program code for speed control of PMSM is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of the proposed vector control implementation.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2630-2632
• /
• 2003

본 연구는 철도 선로변에 설치되는 LDTS(Local Data Transmission System)와 EIS(Electronic Interlocking System) 사이의 인터페이스를 위한 정보전송 프로토콜에 대한 성능검증 시뮬레이션을 위한 것으로, LDTS와 EIS사이의 링크사양, 전송 메시지 정보 및 형식, 장치간 전송 프로토콜 기준 등을 분석하여 파라미터들을 추출한 후, 이들을 ARQ, FEC, HARQ 방식들에 적용하여 처리율(Throughput) 및 여러 설계변수들에 대한 시뮬레이션 결과를 비교하였다. 시뮬레이션 프로그램은 Matlab과 Matlab GUI 툴을 이용하여 작성하여 사용자가 손쉽게 시뮬레이션 파라미터들을 조정할 수 있도록 하였고, Matlab 프로그램 완성후에는 이를 Stand-alone C++ 프로그램으로 코드변환하여 Matlab이 설치되지 않은 컴퓨터에서도 프로그램 사용이 가능하도록 하였다.