• Journal of Digital Convergence
• /
• v.10 no.2
• /
• pp.249-254
• /
• 2012

Assessing the exposure dose and the obtained image during the abdominal radiography with 128-slice MDCT scanner and 4-slice MDCT scanner which are recently being used in clinics using the body tissue-equivalent phantom and the glass dosimeter, the results were as follows. During the CT test for the abdomen, the absorbed dose was $35.8{\pm}0.46mGy$ in 4-MDCT, and $19.03{\pm}0.25mGy$ in 128-MDCT, which indicated that the radiation dose necessary to obtain the image meaningful to diagnosis was required less by 128-MDCT(P<0.05). As a result of analyzing the image obtained from the abdominal test using MDCT with a 5-point Likert scale, 4-MDCT showed the result of 3.52 points, and 128-MDCT showed the result of 4.01 points, that is, the image quality of 128-MDCT was evaluated high, and there was a statistically significant difference. In the results above, it is considered that 128 slice MDCT scanner will be much used later as it can reduce the radiation exposure, and make us obtain the high quality of image.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.525-531
• /
• 2013

In this paper, we propose to apply low delay algorithm using power complementary window to Integer Modified Discrete Cosine Transform (IntMDCT). Conventional transform, the Modified Discrete Cosine Transform (MDCT) usually produces floating point values for integer input values. This causes the expansion of the data. To refine on this, IntMDCT that produces integer values even for integer input values have emerged. However, IntMDCT has a problem of the algorithm delay, such as MDCT. Delay has became a key issue in environments for the purpose of real-time communications. In order to reduce the delay, the proposed algorithm was applied and the results of the performance evaluation show that delay of IntMDCT has reduced by halfexisting delay.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.106-113
• /
• 2003

The modified discrete cosine transform (MDCT) and inverse MDCT (IMDCT) are employed in subband/transform coding schemes as the analysis/synthesis filter bank based on time domain aliasing cancellation (TDAC). And the MDCT and IMDCT are the most computational intensive operations in layer III of the MPEG audio coding standard. In this paper, we propose a new efficient algorithm for the MDCT/IMDCT computation in various audio coding systems. It is based on the MDCT/IMDCT computation algorithm using the discrete cosine transforms (DCTs), and It employs two discrete cosine transform of type II (DCT-II) to compute the MDCT/IMDCT In addition, it takes advantage of ability in calculating the MDCT/IMDCT computation, where the length of a data block Is divisible by 4. The Proposed algorithm in this paper requires less calculation complexity than the existing method does. Also, it can be implemented by the parallel structure, therefore its structure is particularly suitable for VLSI realization

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.69-76
• /
• 2023

A high-quality audio/voice codec using the MDCT/IMDCT process can perfectly restore the current frame through an overlap-add process with the previous frame. In the overlap-add process, an algorithm delay equal to the frame length occurs. In this paper, we propose a MDCT/IMDCT process that reduces algorithm delay by using a variable phase shift in MDCT/IMDCT process. In this paper, a low-delay audio/speech codec was proposed by applying the low delay MDCT/IMDCT algorithm to the ITU-T standard codec G.729.1 codec. The algorithm delay in the MDCT/IMDCT process can be reduced from 20 ms to 1.25 ms. The performance of the decoded output signal of the audio/speech codec to which low-delay MDCT/IMDCT is applied is evaluated through the PESQ test, which is an objective quality test method. Despite of the reduction in transmission delay, it was confirmed that there is no difference in sound quality from the conventional method.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.935-938
• /
• 2013

This letter presents an algorithm for selecting a low delay for the modified discrete cosine transform (MDCT) and inverse MDCT (IMDCT). The implementation of conventional MDCT and IMDCT requires a 50% overlap-add (OLA) for a perfect reconstruction. In the OLA process, an algorithmic delay in the frame length is employed. A reduced overlap window and MDCT/IMDCT phase shifting is used to reduce the algorithmic delay. The performance of the proposed algorithm is evaluated by applying the low-delay MDCT to the G.729.1 speech codec.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.336-343
• /
• 2010

Coronary artery CT angiography has short scanning length, the exposure dose is high. Therefore, it is required to study on the organ dose when using MDCT. We compared the differences between the absorbed dose and effective dose in the major organs assessing the absorbed dose in the major organs by 16-MDCT and 64-MDCT in the subjects with coronary artery CT angiography, the same protocol by 16-MDCT and 64-MDCT. As a result, the great orders of absorbed dose when conducting coronary artery CT angiography had been shown as heart, stomach, liver, pancreas, kidney, spleen, large intestine, lung, small intestine, thyroid gland, ovary, bladder, and orbit with the absorbed dose distribution of $0.538{\pm}0.026(Mean{\pm}SD,\;p<0.05)mGy{\sim}71.316{\pm}4.316mGy$ in 16-MDCT, and heart, stomach, pancreas, spleen, liver, kidney, small intestine, large intestine, lung, thyroid gland, ovary, bladder, and orbit with the absorbed dose distribution of $0.87{\pm}0.01mGy{\sim}115.26{\pm}1.59mGy$ in 64-MDCT, demonstrating some different distributions. The exposed doses to the patient per one time scanning with coronary artery CT angiography were $71.316{\pm}4.316mGy$ in 16-MDCT as the absorbed dose based on the heart and $115.26{\pm}1.59mGy$ in 64-MDCT. The effective doses were 7.41 mSv and 12.11 mSv in 16 and 64-MDCT, respectively. Taking into account the results of brain CT with 2.8 mSv that has comparatively large scanning length and size, facial CT 0.8 mSv, chest CT 5.7 mSv, pelvic CT 7.2 mSv, and abdominal and pelvic CT 14.4 mSv, it is very high considering the scanning length of 13 cm limited to the heart for the scanning range.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.3
• /
• pp.102-108
• /
• 2007

A high-Performance scalable speech codec generally requires a very low-rate first layer and a fine granule second layer, and this codec can be implemented with the harmonic codec and the MDCT-based transform codec for each layer. In this structure, however. each codec requires independent frequency transform and the time delay of each codec is accumulated. resulting in long time delay for the overall codec. In this paper, new MDCT structure in the second layer is Proposed. where MDCT is forced to share the look-ahead region of the first layer in order to prevent the time delay accumulation and the resulting functional error of MDCT is analyzed and removed after IMDCT The Proposed delayless MDCT requires no additional bits and Provides the equivalent coding performance with the reduced time delay, yielding a meaningful enhancement of the overall codec.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.167-175
• /
• 2006

With the recent prevalence of helical CT and multi-slice CT, which deliver higher radiation dose than conventional CT due to overbeaming effect in X-ray exposure and interpolation technique in image reconstruction. Although multi-detector and helical CT scanner provide a variety of opportunities for patient dose reduction, the potential risk for high radiation levels in CT examination can't be overemphasized in spite of acquiring more diagnostic information. So much more concerns is necessary about dose characteristics of CT scanner, especially dose efficient design as well as dose modulation software, because dose efficiency built into the scanner's design is probably the most important aspect of successful low dose clinical performance. This study was conducted to evaluate z-axis geometric dose efficiency in single detector CT and each level multi-detector CT, as well as to compare z-axis dose efficiency with change of technical scan parameters such as focal spot size of tube, beam collimation, detector combination, scan mode, pitch size, slice width and interval. The results obtained were as follows ; 1. SDCT was most highest and 4 MDCT was most lowest in z-axis geometric dose efficiency among SDCT, 4, 8, 16, 64 slice MDCT made by GE manufacture. 2. Small focal spot was 0.67-13.62% higher than large focal spot in z-axis geometric dose efficiency at MDCT. 3. Large beam collimation was 3.13-51.52% higher than small beam collimation in z-axis geometric dose efficiency at MDCT. 4. Z-axis geometric dose efficiency was same at 4 slice MDCT in all condition and 8 slice MDCT of large beam collimation with change of detector combination, but was changed irregularly at 8 slice MDCT of small beam collimation and 16 slice MDCT in all condition with change of detector combination. 5. There was no significant difference for z-axis geometric dose efficiency between conventional scan and helical scan, and with change of pitch factor, as well as change of slice width or interval for image reconstruction. As a conclusion, for reduction of patient radiation dose delivered from CT examination we are particularly concerned with dose efficiency of equipment and have to select proper scanning parameters which increase z-axis geometric dose efficiency within the range of preserving optimum clinical information in MDCT examination.

• Journal of Chest Surgery
• /
• v.39 no.1 s.258
• /
• pp.42-47
• /
• 2006

Background: The new Multidetector Computed Tomography (MDCT) is useful in visualization of complex coronary artery anatomy. We investigated usefulness comparing of invasive coronary angiography with noninvasive MDCT in judgment of functional degree of coronary arteries grafts after coronary artery bypass graft operation. Material and Method: We analyzed the patency of 52 conduits from 15 patients whom consented to take both 32 Channel MDCT and coronary angiography from November 2003 to November 2004. Comparisons were performed for sensitivity, specificity, positive prediction value and negative prediction value between coronary angiography and 3 dimensional reconstruction image using MDCT. Result: The average graft used was 3.4 $\pm$ 0.8 per patient. Average heart rate during MDCT was 86/minute (Range, 60$\∼$110/minute) without administration of $\beta$-blocker. All patients could hold breath as much as necessary. The average graft patency obtained through corollary angiography was 96.2$\%$. In MDCT group, the sensitivity, the specificity, the positive predictive value and the negative predictive value for diagnosis was 100$\%$, 98.0$\%$, 100$\%$ and 66.6$\%$ respectively. Conclusion: The effectiveness of 32 Channel MDCT may be compared to coronary angiography in grasping about patency and bloodstream of graft conduits after coronary artery bypass graft. Also MDCT has the advantage of noninvasiveness and inexpensiveness compared to coronary angiography.

• Journal of Trauma and Injury
• /
• v.19 no.1
• /
• pp.28-34
• /
• 2006

Purpose: In maxillofacial surgery, proper preoperative diagnosis is very important in achieving good postoperative results. Although conventional CT scans are useful for visual representations of fractures, they cannot provide direct guidance for reconstructing facial bone fractures. However, the recent technology of multislice scanning has brought many clinical benefits to CT images. Direct correlations can be made between preoperative imaging data and operative planning. The aim of the current study is to evaluate the differences between conventional CT and multidetective three-dimensional CT(3D MDCT) measurements in craniofacial deformities. Methods: From January 2005 to November 2005, MDCT scans of 41 patients were evaluated by comparing them with conventional CT scans. The 3D MDCT images were assessed and reviewed by using a simple scoring system. Results: The 3D MDCT scans offered easy interpretation, facilitated surgical planning, and clarified postoperative results in malar complex fractures, mandibular fractures, and extensive maxillofacial fractures and cranioplasty. However, 3D MDCT images were not superior to conventional CT scans in the diagnosis of blowout fractures. Conclusion: In spite of its limitations, the 3D MDCT provided additional and more comprehensive information than the conventional CT for preoperative assessment of craniofacial deformities. Therefore, the 3D MDCT can be a useful tool for diagnosis and systematic treatment planning in craniofacial skeletal deformities.