• BMB Reports
• /
• v.49 no.8
• /
• pp.414-423
• /
• 2016

MG53 is a member of the TRIM-family protein that acts as a key component of the cell membrane repair machinery. MG53 is also an E3-ligase that ubiquinates insulin receptor substrate-1 and controls insulin signaling in skeletal muscle cells. Since its discovery in 2009, research efforts have been devoted to translate this basic discovery into clinical applications in human degenerative and metabolic diseases. This review article highlights the dual function of MG53 in cell membrane repair and insulin signaling, the mechanism that underlies the control of MG53 function, and the therapeutic value of targeting MG53 function in regenerative medicine.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.253-260
• /
• 2022

In this study, the microstructural characteristics of a high-speed-extruded Mg-5Bi-3Al (BA53) alloy and its tensile, compressive, and high-cycle fatigue properties are investigated. The BA53 alloy is successfully extruded at a die-exit speed of 16.6 m/min without any hot cracking using a large-scale extruder for mass production. The homogenized BA53 billet has a large grain size of ~900 ㎛ and it contains fine and coarse Mg₃Bi₂ particles. The extruded BA53 alloy has a fully recrystallized microstructure with an average grain size of 33.8 ㎛ owing to the occurrence of complete dynamic recrystallization during high-speed extrusion. In addition, the extruded BA53 alloy contains numerous fine lath-type Mg₃Bi₂ particles, which are formed through static precipitation during air cooling after exiting the extrusion die. The extruded BA53 alloy has a high tensile yield strength of 175.1 MPa and ultimate tensile strength of 244.4 MPa, which are mainly attributed to the relative fine grain size and numerous fine particles. The compressive yield strength (93.4 MPa) of the extruded BA53 alloy is lower than its tensile yield strength, resulting in a tension-compression yield asymmetry of 0.53. High-cycle fatigue test results reveal that the extruded BA53 alloy has a fatigue strength of 110 MPa and fatigue cracks initiate at the surface of fatigue test specimens, indicating that the Mg₃Bi₂ particles do not act as fatigue crack initiation sites. Furthermore, the extruded BA53 alloy exhibits a higher fatigue ratio of 0.45 than other commercial extruded Mg-Al-Zn-based alloys.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.1
• /
• pp.48-53
• /
• 2005

Objective: The purpose of this study is to elucidate in vitro responses to combined gamma knife irradiation and p53 gene transfection on human malignant glioma cell lines. Methods: Two malignant human glioma cell lines, U87MG (p53-wild type) and U373MG (p53-mutant) were transfected with an adenoviral vector containing p53 (MOI of 50) before and after applying 20Gy of gamma irradiation. Various assessments were performed, including, cell viability by MTT assay; apoptosis by annexin assay; and cell cycle by flow cytometry, for the seven groups: mock, p53 only, gamma knife (GK) only, GK after LacZ, LacZ after GK, GK after p53, p53 after GK. Results: Cell survival decreased especially, in the subgroup transfected with p53 after gamma irradiation. Apoptosis tended to increase in p53 transfected U373 MG after gamma irradiation (apoptotic rate, 38.9%). The G2-M phase cell cycle arrest markedly increased by transfecting with p53, 48 hours after gamma knife irradiation in U373 MG (G2-M phase, 90.8%). Conclusion: These results suggest that the in vitro effects of combined gamma knife irradiation and p53 gene transfection is an augmentation of apoptosis and G2-M phase cell cycle arrest, which are more exaggerated in U373 MG with p53 transfection after gamma knife irradiation.

• BMB Reports
• /
• v.47 no.10
• /
• pp.575-580
• /
• 2014

In this study, we investigate whether arsenite-induced DNA damage leads to p53-dependent premature senescence using human glioblastoma cells with p53-wild type (U87MG-neo) and p53 deficient (U87MG-E6). A dose dependent relationship between arsenite and reduced cell growth is demonstrated, as well as induced ${\gamma}H2AX$ foci formation in both U87MG-neo and U87MG-E6 cells at low concentrations of arsenite. Senescence was induced by arsenite with senescence-associated ${\beta}$-galactosidase staining. Dimethyl- and trimethyl-lysine 9 of histone H3 (H3DMK9 and H3TMK9) foci formation was accompanied by p21 accumulation only in U87MG-neo but not in U87MG-E6 cells. This suggests that arsenite induces premature senescence as a result of DNA damage with heterochromatin forming through a p53/p21 dependent pathway. p21 and p53 siRNA consistently decreased H3TMK9 foci formation in U87M G-neo but not in U87MG-E6 cells after arsenite treatment. Taken together, arsenite reduces cell growth independently of p53 and induces premature senescence via p53/p21-dependent pathway following DNA damage.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.383-389
• /
• 2015

The purpose of this study was to investigate the anti-apoptosis-related protein expression in skeletal muscle of rats with different amount of mountain ginseng (MG) added high-fat diet fed. Twenty-four Sprague Dawley male rats were divided into the high-fat diet control group (CON), 0.5% of MG added diet group (MG1), and 1.0% of MG added diet group (MG2) with eight rats each. The P53, anti-apoptotic protein, was significantly lower in MG2 than CON and MG1. The bcl-2 and bcl-xl, however, were not significantly different from MG1 but from CON. The caspase-9 and -3, were significantly lower in MG groups than CON. In addition, it was dramatically lower in MG2. These results suggested that MG addition to the high-fat diet suppressed p53 protein expression and enhanced anti-apoptototic protein expression. MG may be a positive effects on health as a medicinal plant.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.666-672
• /
• 2008

Feasibility of simultaneous removal of organic matter, nitrogen and phosphorus was evaluated by applying AO$_2$ system to treat wastewater from a seafood processing plant. Treatability test was conducted by incorporating activated sludge from municipal sewage treatment plant with PU-AC media. Inflow concentrations of COD, TN, and TP were 198$\sim$1,240 mg/L, 75$\sim$577.4 mg/L, and 2.2$\sim$53.5 mg/L, respectively. Average removal efficiencies and outflow concentration of COD, TN, and TP were 86.5%, 65.7 mg/L; 81.4%, 53.1 mg/L; and 80.6% 4.07 mg/L, respectively. Stable operation was possible by increasing organic matter, nitrogen, and phosphorus loading rate to seafood wastewater treatment system composed of anaerobic and aerobic reactors. Used PU-AC media was proved to be biodegradable in this AO$_2$ system by maintaining high biomass concentration in the PU-AC media.

• The Journal of the Korea Contents Association
• /
• v.6 no.10
• /
• pp.34-40
• /
• 2006

In this study, the treatment of organic matters and nutrients like Nitrogen and Phosphorus with sequencing batch reactors (SBR) was conducted. The following conclusions can be summarized from the study. The influent BOD concentration was varied 19.6 to 40.0mg/L and the effluent was 3.0 to 14.8mg/L. The variations of BOD removal efficiency during the experimental period was $47.9{\sim}88.4%$ and the average was 80.8%. The average removal efficiency was stabilized with the passage of time. Also the COD concentration was flowed into as $12.2{\sim}32.0mg/L$ and the effluent concentration was varied 3.3 to 18.6 mg/L, and then the average COD removal efficiency was 57.3%(minimun 19.2% and maximum 78.6%). But fortunately, the COD removal efficiency was also stabilized as 70.2% after 79days. In the case of T-N, the influent concentration range was $7.53{\sim}14.99mg/L$ and the effluent concentration was 6.59mg/L(the average removal efficiency was 40.3%) until the first experiment time 79days. But after normalizing the system, it was 4.44mg/L (the average removal efficiency was 56.4%). Also the influent T-P concentration was varied from 0.77 to 1.91mg/L and the effluent concentration was $0.26{\sim}1.53mg/L$. The removal efficiency was varied from 5.3 to 71.7%. considerably, therefore the average removal efficiency was 42.6%. The reason was concluded that the sludge wasn't discharged for increasing MLSS concentration.

• Korean Journal of Food Science and Technology
• /
• v.44 no.4
• /
• pp.452-459
• /
• 2012

This study was conducted in order to investigate the effect of resveratrol on the induction of apoptosis in MDA-MB-231 breast cancer cells. The result of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl terazolium bromide (MTT) assay shows that cell viability significantly decreased in a dose and time-dependent manner. 4',6-diamidino-2-phenylindole (DAPI) staining shows significantly increased chromatin condensation in a dose and time-dependent manner. Resveratrol increased the expression of p53, cleaved-caspase-3, and cleaved-caspase-9, whereas the expression of PI3K/Akt decreased in a time-dependent manner. We investigated the in vivo tumor growth inhibitory effect of resveratrol. Tumor volume was significantly decreased in the 50 mg/kg resveratrol-administration group compared to the control group. In the 50 mg/kg treated group. Apoptosis cells were frequently observed by terminal deoxynucleotidyl transferase mediated dUTP nick end labeling (TUNEL) assay. Immunohistochemistry staining shows increased the expression of p53, cytochrome-C, and cleaved-caspase-3 in the 50 mg/kg treated group. These results indicate that resveratrol induced apoptosis through PI3K/Akt and p53 signal pathway in MDA-MB-231 cell.

• Korean Journal of Pharmacognosy
• /
• v.53 no.4
• /
• pp.202-206
• /
• 2022

Salidroside is a major phenolic glycoside of Acer tegmentosum (Aceraceae) and known to be a hepatoprotective compound. Extraction conditions are one of the most important factors to save time and cost from an economic point of view. For this reason, this study was conducted to optimize the extraction condition for maximum yield of salidroside. For optimization, three extraction factors such as ethanol concentration (%), extraction temperature (℃), and solvent to material ratio (mg/mL) were tested and optimized for maximum yield of salidroside using response surface methodology (RSM). The optimal condition was obtained as an ethanol concentration of 53.4%, an extraction temperature at 67.11℃ and a solvent to material ratio (mg/mL), 195.55 mg/ml. The salidroside yield under optimal conditions was found to be 1.59 mg/g dried samples, which were well-matched with the predicted value of 1.56 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of salidroside as hepatoprotective therapeutics.

• Proceedings of the Korean Nutrition Society Conference
• /
• 2001.11a
• /
• pp.53-53
• /
• 2001