• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.199-204
• /
• 2011

This paper evaluates on the feasibility of MIL-STD-188-220 protocol as a medium access protocol over WNW(Wideband Network Waveform) by simulating and comparing with IEEE 802.11e-based protocol. WNW is newly designed waveform for next-generation broadband tactical communication system. This paper shows the feasibility of using the MIL-STD-188-220 protocol that shows better performance than IEEE 802.11e-based protocol on the particular environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.139-150
• /
• 2014

This paper suggests an algorithm to improve QoS by using DTR bit employed in the MIL-STD-188-220 protocol, when there is a multi-path between source and destination in the environment of KVMF tactical network supporting NCW. The MIL-STD-188-220 protocol can evaluate the link quality relatively but it cannot support optimal path selection for QoS. In order to solve this problem, we design an algorithm for selecting path using topology table which reflects measured DTR of path after the completion of transmission. The performance of the proposed algorithm has been evaluated by OPNET simulator. As a result of the simulation, it is found that QoS of proposed algorithm is enhanced higher than that of the MIL-STD-188-220 in the aggravated communication environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.15-24
• /
• 2008

The data delivery confirmation method of MIL-STD-188-220C, which is a tactical wireless mobile Ad-Hoc communication protocol, is that a source node requires the end-to-end ack from all destination nodes and the data-link ack from 1-hop neighboring destination nodes and relaying nodes, regardless of the hop distance from a source node to destination nodes. This method has the problem to degrade the whole communication network performance because of excessive data traffic due to the duplicate use of end-to-end ack and data-link ack, and the collision among end-to-end acks on the wireless network in the case of confirming a data delivery within an 1-hop distance. In order to solve this problem, this paper has proposed the method to perform the data delivery confirmation with the improvement of communication network performance through the data traffic reduction by achieving the reliable data delivery confirmation requiring the only data-link ack within an 1-hop distance. The effects of the proposed method are analyzed in the two aspects of the data delivery confirmation delay time and the data delivery confirmation success ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1129-1137
• /
• 2012

The wireless link of tactical datalink system provides a communication network to share digitalized tactical data in real-time. Also MAC(Multiple Access Control) of this system is subject to TDMA or CSMA according to a operated circumstance of target nodes to exchange the data reliably. In this paper, we verify the operability when we use CSMA scheme based on MIL-STD-188-220 in tactical datalink system which is basically designed with TDMA, and provide a mathematical analysis scheme to verify the operability and performance. Finally, by implementing CSMA scheme to a tactical datalink equipment we obtain practical results which can be compared with theoretical results.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.161-167
• /
• 2008

A method to compute the size of packet and the optimal way to transmit the packets are proposed in this work for the VoIP communication using the MIL-STD-188-220C, military wireless Ad-hoc protocol which is used for the amicable communications of both speeches and data between several radiotelegraph. The expected time of data transmission is estimated beforehand, and then the size of package and transmission method are decided in the consideration of VoIP speech quality for the users as well as the data transmission quality of radiotelegraph.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.561-568
• /
• 2014

The Republic of Korea Army is using R-NAD of MIL-STD-188-220 as a Media Access Control protocol. Under urgent situations, almost all stations transmit data frames and then the network will reach a saturation state. Several articles have been devoted to the study of R-NAD performance. However, most of them focus on comparing the performance of some NADs using network simulation tools. We propose an analytical model to compute the throughput of R-NAD under the assumption of a network traffic saturation. Analytical results were verified by Monte Carlo methods. We have shown that the performance of a success probability and an average idle time remains almost unchanged as the total number of stations increases. We have also shown that Type 1/2/4 operation mode outperforms Type 3 operation mode in throughput. The results showed that the system with a squelch detection achieved a better performance than the one without it. The longer DATA time had a higher throughput.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.5
• /
• pp.635-642
• /
• 2012

The Packet radio C2OTM(Command and Control On The Move) for Command, Control and situational awareness in communication environment of current Combat Net Radio Network is required in a relay transmission techniques. This is to assure the reliability of information transfer, and extend Wireless Coverage and overcome Communication obstacles of mountainous terrain. For the reliability of information transmission in tactical environment, Ad hoc Networking is necessary considering communication environment and an appropriate application of error correction. In this study, We propose a on-demand SDR algorithm that is currently being applied the FEC, Golay, Repetition Code. This enhanced relay transfer uses Ack Reply in tactical operating environment of MIL-STD-188-220 Protocol.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.335-339
• /
• 2007

CNR(Combat Network Radio)는 전장에서 사용하는 라디오이다. 현재 군에서는 CNR을 이용한 MIL-STD-188-220 프로토콜을 적용하여 감시/타격체계와 C4I체계간에 연동을 시도하고 있으며, TICN의 TMMR에도 MIL-STD-188-220 프로토콜을 적용하여 상호연동성을 확보하기 위한 시도를 하고 있는 중이다. 이에 본 논문에서는 "감시정찰센서 네트워크"의 군전술통신망 게이트웨이(TCG)를 개발 하면서 군의 CNR 환경에서 가장 중요한 음성과 데이터 혼합 운용을 위해 부대 및 망의 운용 상태를 고려하여 네트워크 파라미터의 최적한 값과 운용방법을 제시 하고자 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.1
• /
• pp.44-54
• /
• 2007

In the military field, according to the MIL-STD-188-220, which is an Ad-Hoc communication protocol used for sending out or receiving data and voice smoothly among nodes in the situation that wireless communication nodes move arbitrarily, data communication is cut off because nodes can not know topology changes perpetually in the link disconnection state due to node movement in the case that transmitters do not confirm whether data is delivered to receivers or not, and transmit only the data having routine precedence continuously. In order to solve this problem, we have proposed the technique that makes efficient data communication possible by achieving a rapid topology change detection and link information update using TEST frame. We have analyzed TEST frame application effects in the two aspects of the topology update delay time and the data transmission success ratio.