• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2013

In this paper, a biosensor based on a gated lateral bipolar junction transistor (BJT) is proposed. The gated lateral BJT can function as both a metal-oxide-semiconductor field-effect transistor (MOSFET) and a BJT. By using the self-assembled monolayer (SAM) method, the C-reactive protein antibodies were immobilized on the floating gate of the device as the sensing membrane. Through the experiments, the characteristics of the biosensor were analyzed in this study. According to the results, it is indicated that the gated lateral BJT device can be successfully applied as a biosensor. Additionally, we found that the sensitivity of the gated lateral BJT can be varied by adjusting the emitter (source) bias.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.284-289
• /
• 2014

In this paper, modeling of a gate/body-tied (GBT) PMOSFET photodetector with built-in transfer gate is performed. It can control the photocurrent with a high-sensitivity. The GBT photodetector is a hybrid device consisted of a MOSFET, a lateral BJT, and a vertical BJT. This device allows for amplifying the photocurrent gain by $10^3$ due to the GBT structure. However, the operating parameters of this photodetector, including its photocurrent and transfer characteristics, were not known because modeling has not yet been performed. The sophisticated model of GBT photodetector using a process simulator is not compatible with circuit simulator. For this reason, we have performed SPICE modeling of the photodetector with reduced complexity using Cadence's Spectre program. The proposed modeling has been demonstrated by measuring fabricated chip by using 0.35 im 2-poly 4-metal standard CMOS technology.

• Journal of Sensor Science and Technology
• /
• v.24 no.5
• /
• pp.353-357
• /
• 2015

A new SPICE-compatible model for a gate/body-tied PMOSFET photodetector (GBT PD) with an overlapping control gate is presented. The proposed SPICE-compatible model of a GBT PD with an overlapping control gate makes it possible to control the photocurrent. Research into GBT PD modeling was proposed previously. However, the analysis and simulation of GBT PDs is not lacking. This SPICE model concurs with the measurement results, and it is simpler than previous models. The general GBT PD model is a hybrid device composed of a MOSFET, a lateral bipolar junction transistor (BJT), and a vertical BJT. Conventional SPICE models are based on complete depletion approximation, which is more applicable to reverse-biased p-n junctions; therefore, they are not appropriate for simulating circuits that are implemented with a GBT PD with an overlapping control gate. The GBT PD with an overlapping control gate can control the sensitivity of the photodetector. The proposed sensor is fabricated using a $0.35{\mu}m$ two-poly, four-metal standard complementary MOS (CMOS) process, and its characteristics are evaluated.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.815-818
• /
• 1998

The Insulated Gate Bipolar Transistor has the characteristics of MOSFET and BJT. The characteristics of proposed device exhibit high speed switching, the voltage controlled property, and the low ON resistance. This hybrid device has been used and developed continuously in the power electronic engineering field. We can simulate many IGBT circuits, such as the motor drive circuit, the switching circuits etc, with PSpice. However, some problems in PSpice is that the IGBT is old-fashioned and is very difficult to get it. In this paper, the IGBT in PSpice is considered as the basic structure. We changed the valuse of base width, gate-drain overlaping area, device area, and doping concentration, then calculated MOS transconductance, ambipolar recombination lifetime etc. Using this resultant parameter, we could predict the transient response characteristicsof IGBT, for examplex, voltage overshoot, the rising curve of voltage, and the falling curve of current.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.421-428
• /
• 2015

Electronic/hybrid car and electroplating rectifier should have switching devices such as SCR, MOSFET, IGBT. And those switching devices should be operated by gate driver. In this paper, we propose high power gate driver that contains H-Bridge using 4 BJTs. H-Bridge and transformer generate isolate power. And gate control signal is transferred to isolated one by photo coupler and operate real switching device. We designed H-Bridge and 555-Timer by PSpice simulation and manufactured real product. Finally we succeed to operate 27V 50,000A electroplating rectifier using proposed gate driver.