• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.60-66
• /
• 2006

This paper is a study on the coupled load analysis using MSC/Nastran superelement method. After selecting the hunch vehicle, coupled load analysis is performed. From the results of coupled load analysis the loads and displacements on the major parts of satellite structure are calculated Based on the loads and displacements, the safety of satellite structure is judged. Coupled load analysis has been executed using MSC/Nastran DMAP code so far. Because DMAP code was very complicated and long in 1ength it was difficult to analyze and modify the DMAP code. To solve out these problems, coupled load analysis was executed using MSC/Nastran 2005 superelemnt method. At first, satellite FE-model was converted to the Craig-Bampton model using MSC/Nastran 2005 superelement method and verified Finally, coupled load analysis was performed using satellite Craig-Bampton model and launch vehicle FE-model and verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.657-664
• /
• 2013

The flight loads analysis was carried out on the aircraft with high aspect ratio flexible wings by using commercial software MSC/NASTRAN. The aerodynamic model for flight loads analysis was corrected, compared with results of the wind tunnel test. And in-house program was developed for pre and post works. In-house program enabling management of much data automatically consists of three modules: 'Construction of the mass distributed model', 'Selection of critical load cases', 'Generation of external loads for structural design'. By utilizing these techniques and programs, the procedure of flight loads analysis was established for effective development of an aircraft.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.63-71
• /
• 2001

This paper introduces a method for calculation of dynamic stress occurring in flexible bodies of a moving multibody system by using commercial softwares DADS for dynamic analysis and MSC/NASTRAN for finite element analysis. Three methods for model transient response analysis of a flexible body are summarized. Elastic deformation of a flexible body can be described with normal modes and static modes composed of constraint modes and residual attachment modes. The deformation modes divided into fixed-interface modes and free-interface modes can be determined by using MSC/NASTRAN and selected for dynamic analysis. The dynamic results obtained from DADS are utilized to calculate dynamic stress by using mode-displacement method or mode-acceleration method of MSC/NASTRAN. As a numerical example of the analysis, we used a three dimensional slider-crank model with a flexible connecting rod.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.75-80
• /
• 1996

본 고에서는 자동차, 항공, 전자, 중고업 및 건설 등의 분야에 널리 사용이 가능한 MSC/NASTRAN의 개략적인 기능을 살펴보고자 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.303-313
• /
• 2001

The identification of power flow in dynamically loaded structures Is essential in the analysis of structure-borne noise. However there are no general purpose tools to estimate powers flow. To make matters worse. It is very difficult to measure it. The power flow can be formulated in terms of balance forces(ELFORCE) at each element and velocities at the associated node obtained with MSC/NASTHAN. In this paper the procedure which is consist of the computations of the balance forces of al1 elements and the velocities at all nodes using MSC/NASTRAN. The calculations of the power f1ow at each element using PCL(PATRAN Command Language) and the Preparation of post -processes is set UP.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.433-434
• /
• 2009

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.1-8
• /
• 2004

In this study, the method of computing and extracting the generalized unsteady aerodynamic matrices using MSC/NASTRAN and MSC/NASTRAN DMAP ALTER has been suggested for the analysis and control of aeroelastic phenomena such as flutter and gust response analysis. In addition to that, the method of approximating the generalized unsteady aerodynamic matrices using minimum state approximation method has been proposed in order to cast the aeroelastic equations of motion in state space form for aeroelastic analysis and control application. Simplified aircraft wing box model has been used for the validation of the methods suggested in this study.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.250-255
• /
• 2008

Springs are widely utilized in machine element. To find out stiffness of frustum-shaped coil spring, the space beam theory using the finite element method is adopted in this paper. In three dimensional space, a space frame element is a straight bar of uniform cross section which is capable of resisting axial forces, bending moments about two principal axes in the plane of its cross section and twisting moment about its centroidal axis. The corresponding displacement degrees of freedom are twelve. To find out load vector of coil spring subjected to distributed compression. principle of virtual work is adapted. And this theory was programming using MATLAB software. To compare FEM using MATLAB software was applied MSC. Nastran software. The geometry model for MSC. Patran was produced by 3-D design modeling software. Finite element model was produced by MSC. Patran. Finite element was applied tetra (CTETRA) having 10 node. The analysis results of the MATLAB and MSC. Nastran are fairly well agreed with those of various experiments. Using MATLAB program proposed in this paper and MSC. Nastran, spring constants and stresses can be predicted by input of few factors.

• International Journal of Safety
• /
• v.6 no.1
• /
• pp.7-10
• /
• 2007

In this paper, we found that modification of the local flexibility (or local stiffness) of the 4 parts on which shock absorbers are mounted in the vehicle body has some influence the level of ride safety and comfort. Multi-body dynamic analysis considering the flexibility of the vehicle body is performed using MSC/ADAMS and MSC/NASTRAN. More concretely speaking, natural frequencies and mode shapes computed by MSC/NASTRAN are used as input data for multi-body dynamic analysis in MSC/ADAMS. It is confirmed that the ride comfort can be improved by appropriately changing the local stiffness of the vehicle body through several simulations using MSC/ADAMS.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.98-103
• /
• 2002

In this paper, shock analysis was performed for coarse and fine mesh model using MSC/NASTRAN and ANSYS after substituting the foundation of deck mounted equipment of marine ship for mass-spring system. In order to determine input file in MSC/NASTRAN, dynamic response analysis was also performed using DDAM based on the calculation in the range of low frequency. It was confirmed that the coarse mesh model has the sufficient effective weight in a lower degree mode compared to fine mesh model.