• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.331-344
• /
• 2020

Ship's hydrodynamic coefficients in manoeuvring equations are generally derived by captive model tests or numerical calculations. Empirical formulas have been also proposed in some previous researches, which were useful for practical predictions of hydrodynamic coefficients of a ship by using main dimensions only. In this study, ship's hydrodynamic coefficients based on empirical formulas were optimized by using its free running test data. Eight manoeuvring performance indices including steady turning radius, reach in zig-zag as well as well-known IMO criteria indices are selected in order to compare simulation results with free runs effectively. Sensitivities of hydrodynamic coefficients on manoeuvring performance indices are analyzed. And hydrodynamic coefficients are tuned within fixed bounds in order of sensitivity so that they are tuned as little as possible. Linear and nonlinear coefficients are successively tuned by using zig-zag and turning performance indices. Trajectories and velocity components by simulations with tuned hydrodynamic coefficients are in good agreements with free running tests. Tuned coefficients are also compared with coefficients by captive model tests or RANS calculations in other previous researches, and the magnitudes and signs of tunes are discussed.

• 대한조선학회논문집
• /
• 제52권5호
• /
• pp.407-417
• /
• 2015

For the more accurate prediction on manoeuvring performance of a ship at initial design phase, bare hull manoeuvring coefficients were estimated by RANS(Reynolds Averaged Navier-Stokes) based virtual captive model tests. Hydrodynamic forces and moment acting on the hull during static drift and harmonic oscillatory motions were computed with a commercial RANS code STAR-CCM+. Automatic and consistent mesh generation could be implemented by using macro functions of the code and user dependency could be greatly reduced. Computed forces and moments on KCS and KVLCC 1&2 were compared with the corresponding measurements from PMM(Planar Motion Mechanism) tests. Quite good agreement can be observed between the CFD and EFD results. Manoeuvring coefficients and IMO standard manoeuvres estimated from the computed data also showed reasonable agreement with those from the experimental data. Based on these results, we could confirm that the developed virtual captive manoeuvring model test process could be applied to evaluate manoeuvrability of a ship at the initial hull design phase.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.43-52
• /
• 2003

Two methods which estimate manoeuvring derivatives in the model of hydrodynamic force and moment acting on a manoeuvring ship using sea trial data were compared. One is the widely used parameter estimation method by using the Extended Kalman Filter (EKF), which estimates state variables of linearized state space model at every instant after dealing with the coefficients as the augmented state variables. The other one is the Estimation-Before-Modeling (EBM) technique, so called the two-step method. In the first step, hydrodynamic force of which dynamic model is assumed the third-order Gauss-Markov process is estimated along with motion variables by the EKF and the modified Bryson-Frazier smoother. Then, in the next step, manoeuvring derivatives are identified through the regression analysis. If the exact structure of hydrodynamic force could be known, which was an ideal case, the EKF method would be regarded as being more superior compared to the EBM technique. However the EBM technique was more robust than the EKF method from a realistic point of view where the assumed model structure was slightly different from the real one.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.156-163
• /
• 2006

The accuracy of estimates of hydrodynamic coefficients can be increased by using sensitivity-maximizing inputs. In this study, sensitivity-maximizing actuator commands of a submersible, which are sequences of bang-bang type commands, were obtained using Genetic Algorithm (GA) optimization technique. By comparing the total sensitivity values, deduced actuator inputs were found to be superior to the other sea trials. Based on the sensitivity distribution of conventional sea trials and sensitivity distribution results through deduced input scenario a review of submersibles' manoeuvring equations of motion was conducted .

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.11-24
• /
• 2007

Better prediction of a ship's manouevrabilty in initial design stage is becoming more, important as IMO manoeuvring criteria has been activated in the year of 2004. In the present study, in order to obtain more exact and reliable results for ship manoeuvrability in the initial design stage, numerical simulation is carried out by use of RANS equation based calculation of hydrodynamic forces exerted upon the ship hull. Other forces such as rudder force and propeller force are estimated by one of the empirical models recommended by MMG Group. Calculated hydrodynamic force coefficients are compared with those obtained by empirical models. Standard manoeuvring simulations such as turning circle and zig-zag are also carried out for a medium size Product Carrier and the results are compared with those of pure empirical models and manoeuvring sea trial. Generally good qualitative agreement is obtained in hydrodynamic forces due to steady oblique motion and steady turning motion between the results of CFD calculation and those of MMG model, which is based on empirical formulas. The results of standard manoeuvring simulation also show good agreement with sea trial results.

• 한국항해항만학회지
• /
• 제47권6호
• /
• pp.305-314
• /
• 2023

본 연구에서는 연안 및 항만 내에서 운항이 빈번한 총톤수 9.77톤급 소형어선을 대상으로 구속모형시험을 수행하고, 선속 별 운항성능을 추정하였다. 연안 및 항내에서는 소형 어선이 주로 중저속 운항함을 고려하여, 구속모형시험은 8노트 이하에서 수행하였다. 실선을 1/3.5 축소한 모형선을 대상으로 선형예인수조의 프로펠러 단독특성, 저항, 자항추진 시험을 통하여 실선 선속 별 저항추진성능을 추정하였다. 그리고 타 단독특성, 3자유도 정적 및 동적 HPMM 시험을 수행하고 수평면 운항모델 내 유체력 미계수들을 도출하였다. 특히 사항 및 순수선수동요시험은 2~8노트 영역에서 수행되었고, 주요 선형 유체력 미계수들이 선속에 따라 현저하게 변화함을 파악하였다. 선형 유체력 미계수들을 Froude 수에 대한 함수화 한 후, 선속 별 시뮬레이션을 통하여 대상 어선의 조종성능을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.935-941
• /
• 2016

Predicting and evaluating ship manoeuvring characteristics are very important not only for the design stage, but also for the existing vessels. There are several ways to predict ship's manoeuvrability and most of them are highly connected with the estimation of hydrodynamic coefficients. This paper presents a new estimation method using the system identification with mathematical algorithms for estimating hydrodynamic coefficient in the ship's mathematical model. Specifically a double ended ferry which equips four azimuth propulsion systems were chosen as benchmark ship and a set of benchmark data which is generated in the fast time simulation software was provided to conduct mathematical optimization process. Also the initial values for the optimization were borrowed from the empirical regression formulas of the simulation software of Rheinmetall Defence ship simulator. Therefore the newly suggested mathematical optimization algorithm gave a successful result for estimation hydrodynamic coefficients. Proper optimization conditions of the objective function and constraints were also verified during the study.

• 대한조선학회논문집
• /
• 제45권3호
• /
• pp.280-287
• /
• 2008

In this paper, a mathematical model for a ship manoeuvring with low forward speed in shallow water was suggested. Based on the cross flow model with low forward speed in deep sea, hull, propeller and rudder models were modified to consider the shallow water effects. Static drift and PMM tests were performed to obtain the cross flow drag coefficients and hydrodynamic coefficients. To validate suggested mathematical model, numerical simulation results were compared with those of sea-trials. Through comparisons, it was concluded that suggested mathematical model could give proper estimation on turning test results.

• 한국항해학회지
• /
• 제18권4호
• /
• pp.49-57
• /
• 1994

In marine transportation of bulk cargoes such as crude oil. ore, coal etc., a lot of full form ship which have poor manoeuvrability were presented in many countries. Since ship manoeuvrability depends upon many parameters namely hydrodynamic derivatives, interference factors etc., as external forces, it is of great importance that we investigate these values of parameters on analysis of manoeuvrability. In this paper, we investigated and analyzed interaction coefficients among hull-propeller-rudder for a full form ship by captive model test in circulating water channel, and then compared with experimental results by PMM test. A tanker model ship which has 0.83 as block coefficient and MMG mathematical models were used in this experiment. Almost same tendencies were found in qualitative analysis, even though more serial experiments were demanded in quantitative analysis.

• Journal of Hydrospace Technology
• /
• 제2권2호
• /
• pp.24-35
• /
• 1996

This paper describes parameter identification techniques formulated for the estimation of maneuvering coefficients of a submerged body. The first part of this paper is concerned with the identifiability of the system parameters. The relationship between a stochastic linear time-invariant system and the equivalent dynamic system is investigated. The second is concerned with the development of the numerically stable identification technique. Two identification techniques are tested; one is the ma7mum likelihood (ML) methods using the Holder & Mead simplex search method and using the modified Newton-Raphson method, and the other is the modified extended Kalman filter (MEKF) method with a square-root algorithm, which can improve the numerical accuracy of the extended Kalman filter. As a results, it is said that the equations of motion for a submerged body have higher probability to generate simultaneous drift phenomenon compared to general state equations and only the ML method using the Holder & Mead simplex search method and the MEKF method with a square-root algorithm gives acceptable results.