• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.141-153
• /
• 2016

Reliable assessment of Land Use and Land Cover (LULC) changes greatly improves many practical issues in hydrography, socio-geographical research such as the observation of erosion and accretion, coastal monitoring, ecological effects evaluation. Remote sensing imageries can offer the outstanding capability to monitor nature and extent of land and associated changes over time. Nowadays accurate analysis using remote sensing imageries with high spatio-temporal resolution is required for environmental monitoring. This study develops a methodology of mapping and change detection in LULC by using classified Korea Multi-Purpose Satellite-2 (KOMPSAT-2) multispectral imageries at Jeonbuk and Jeonnam provinces including protected tidal flats located in the west coasts of Korean peninsula from 2008 to 2015. The LULC maps generated from unsupervised classification were analyzed and evaluated by post-classification change detection methods. The LULC assessment in Jeonbuk and Jeonnam areas had not showed significant changes over time although developed area was gradually increased only by 1.97% and 4.34% at both areas respectively. Overall, the results of this study quantify the land cover change patterns through pixel based analysis which demonstrate the potential of multispectral KOMPSAT-2 images to provide effective and economical LULC maps in the coastal zone over time. This LULC information would be of great interest to the environmental and policy mangers for the better coastal management and political decisions.

• Korean Journal of Remote Sensing
• /
• v.28 no.1
• /
• pp.121-128
• /
• 2012

High resolution intertidal DEM is a basic material for science research like sedimentation/erosion by ocean current, and is invaluable in a monitoring of environmental changes and practical management of coastal wetland. Since the intertidal zone changes rapidly by the inflow of fluvial debris and tide condition, remote sensing is an effective tool for observing large areas in short time. Although radar interferometry is one of the well-known techniques for generating high resolution DEM, conventional repeat-pass interferometry has difficulty on acquiring enough coherence over tidal flat due to the limited exposure time and the rapid changes in surface condition. In order to overcome these constraints, we tested the feasibility of radar interferometry using Cosmo-SkyMed tandem-like one-day data and ERS-ENVISAT cross tandem data with very short revisit period compared to the conventional repeat pass data. Small temporal baseline combined with long perpendicular baseline allowed high coherence over most of the exposed tidal flat surface in both observations. However the interferometric phases acquired from Cosmo-SkyMed data suffer from atmospheric delay and changes in soil moisture contents. The ERS-ENVISAT pair, on the other hand, provides nice phase which agree well with the real topography, because the atmospheric effect in 30-minute gap is almost same to both images so that they are cancelled out in the interferometric process. Thus, the cross interferometry with very small temporal baseline and large perpendicular baseline is one of the most reliable solutions for the intertidal DEM construction which requires very accurate mapping of the elevation.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.179-197
• /
• 2020

Topographic normalization reduces the terrain effects on reflectance by adjusting the brightness values of the image pixels to be equal if the pixels cover the same land-cover. Topographic effects are induced by the imaging conditions and tend to be large in high mountainousregions. Therefore, image analysis on mountainous terrain such as estimation of wildfire damage assessment requires appropriate topographic normalization techniques to yield accurate image processing results. However, most of the previous studies focused on the evaluation of topographic normalization on satellite images with moderate-low spatial resolution. Thus, the alleviation of topographic effects on multi-temporal high-resolution images was not dealt enough. In this study, the evaluation of terrain normalization was performed for each band to select the optimal technical combinations for rapid and accurate wildfire damage assessment using PlanetScope images. PlanetScope has considerable potential in the disaster management field as it satisfies the rapid image acquisition by providing the 3 m resolution daily image with global coverage. For comparison of topographic normalization techniques, seven widely used methods were employed on both pre-fire and post-fire images. The analysis on bi-temporal images suggests the optimal combination of techniques which can be applied on images with different land-cover composition. Then, the vegetation index was calculated from the images after the topographic normalization with the proposed method. The wildfire damage detection results were obtained by thresholding the index and showed improvementsin detection accuracy for both object-based and pixel-based image analysis. In addition, the burn severity map was constructed to verify the effects oftopographic correction on a continuous distribution of brightness values.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.667-677
• /
• 2020

Crop water stress can be detected based on soil moisture content, crop physiological characteristics and remote-sensing technology. The detection of crop water stress is an important issue for the accurate assessment of yield decline. The crop water stress index (CWSI) has been introduced based on the difference between leaf and air temperature. In this paper, drone-based thermal infrared image was used to map of crop water stress in water control plot (WCP) and water deficit plot (WDP) over spring chinese cabbage fields. The spatial distribution map of CWSI was in strong agreement with the abnormal growth response factors (plant height, plant diameter, and measured value by chlorophyll meter). From these results, CWSI can be used as a good method for evaluation of crop abnormal growth monitoring.

• BMB Reports
• /
• v.38 no.1
• /
• pp.71-76
• /
• 2005

Ceruloplasmin (CP) is the major plasma antioxidant and copper transport protein. Monoclonal antibodies (mAbs) against human CP were produced and characterized. A total of five hybridoma cell lines were established (CP2, CP10, CP20, CP25, CP30). From the epitope mapping analysis, two subgroups of mAbs recognize different peptide fragments were identified. When the purified CP was incubated with the mAbs, the ferroxidase activity of CP was inhibited up to a maximum 57%. Immunoblotting with various tissue homogenates indicated that all the mAbs specifically recognize a single protein band of 130 kDa. They also appear to be extensively cross-reactive among different mammalian including human and avian sources. These results demonstrated that only one type of immunologically similar CP is present in all of the mammalian tissues including human. The CP mAbs could be of great benefit to design the diagnostic kit for CP-related diseases such as Wilson's disease.

• BMB Reports
• /
• v.38 no.6
• /
• pp.703-708
• /
• 2005

We cloned and expressed human pyridoxal-5'-phosphate (PLP) phosphatase, the coenzymatically active form of vitamin $B_6$, in Escherichia coli using pET15b vector. Monoclonal antibodies (mAb) were generated against purified human brain PLP phosphatase in mice, and four antibodies recognizing different epitopes were obtained, one of which inhibited PLP phosphatase. The binding affinities of these four mAbs to PLP phosphatase, as determined using biosensor technology, showed that they had similar binding affinities. Using the anti-PLP phosphatase antibodies as probes, we investigated their cross-reactivities in various mammalian and human tissues and cell lines. The immunoreactive bands obtained on Western blots had molecular masses of ca. 33 kDa. Similarly fractionated extracts of several mammalian cell lines all produced a single band of molecular mass 33 kDa. We believe that these PLP phosphatase mAbs could be used as valuable immunodiagnostic reagents for the detection, identification, and characterization of various neurological diseases related to vitamin $B_6$ abnormalities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.77-85
• /
• 1990

The application of remote sensing in small scale mapping has recently been widened to various fields such as information analysis of landuse, environmental conservation and natural resources. SPOT imagery, in particular, offers data which can be processed for 3-dimensional point determination. This is made possible by its high resolution, appropriate swatch width/altitude ratio and stereo imaging capabilities. This study aims to develop a suitable polymonial and an algorithm in the determination of exterior orientation which is essential in the 3-dimensional point determination of SPOT imgery. An algorithm is presented in this study to determine the exterior orientation of a preprocessed level lB film of the satellite image. It was found that a polynominal of 15 parameters is the best fit polynominal for exterior orientation determination, where 1st order line function is used for positon ($X_o$, $Y_o$, $Z_o$) and 2nd order line function is used for orientation (${\kappa}_o$, ${\phi}_o$, ${\omega}_o$).

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1474-1480
• /
• 2013

Silicon carbide (SiC)-zirconium diboride ($ZrB_2$) composites were prepared by subjecting a 60:40 vol% mixture of ${\beta}$-SiC powder and $ZrB_2$ matrix to spark plasma sintering (SPS) in 15 $mm{\Phi}$ and 20 $mm{\Phi}$ molds. The 15 $mm{\Phi}$ and 20 $mm{\Phi}$ compacts were sintered for 60 sec at $1500^{\circ}C$ under a uniaxial pressure of 50 MPa and argon atmosphere. Similar composites were simulated using $Flux^{(R)}$ 3D computer simulation software. The current and power densities of the specimen sections of the simulated SiC-$ZrB_2$ composites were higher than those of the mold sections of the 15 $mm{\Phi}$ and 20 $mm{\Phi}$ mold simulated specimens. Toward the centers of the specimen sections, the current densities in the simulated SiC-$ZrB_2$ composites increased. The power density patterns of the specimen sections of the simulated SiC-$ZrB_2$ composites were nearly identical to their current density patterns. The current densities of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composites were higher than those of the 20 $mm{\Phi}$ mold in the center of the specimen section. The volume electrical resistivity of the simulated SiC-$ZrB_2$ composite was about 7.72 times lower than those of the graphite mold and the punch section. The power density, 1.4604 $GW/m^3$, of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composite was higher than that of the 20 $mm{\Phi}$ mold, 1.3832 $GW/m^3$. The $ZrB_2$ distributions in the 20 $mm{\Phi}$ mold in the sintered SiC-$ZrB_2$ composites were more uniform than those of the 15 $mm{\Phi}$ mold on the basis of energy-dispersive spectroscopy (EDS) mapping. The volume electrical resistivity of the 20 $mm{\Phi}$ mold of the sintered SiC-$ZrB_2$ composite, $6.17{\times}10^{-4}{\Omega}cm$, was lower than that of the 15 $mm{\Phi}$ mold, $9.37{\times}10^{-4}{\Omega}{\cdot}cm$, at room temperature.

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.3
• /
• pp.119-137
• /
• 2013

This study was to compare the description of content types(content forms) and media types of RDA and ISBD in order to revise GMD of KCR4. Test and survey were conducted as the research methods for comparing content types and media types description of RDA and ISBD. As a result, RDA content types description is better than ISBD in aspects of uniformity and correct rates. Especially, detailed list of content types in RDA could make the resources to be expressed completely, but content forms with adding the content qualification in ISBD could make the resource to be expressed with many errors. Therefore, there were some considerations to describe content types. First, content types terms in RDA need to be specified more. Second, some detailed rules need to be regulated on the combination of content qualification of ISBD. Third, the mapping tables between RDA content types and ISBD content forms need to be revised. Fourth, RDA content types list will be more applicable in KCR4 based on the uniformity and correct rates in the test. This study will contribute to analyze and suggest RDA and ISBD terms list of content types and media types for KCR4.