• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1201-1208
• /
• 2014

As the wireless communication technologies are being studied for application to marine communication networks in a fusion of marine industries and IT technology, this paper proposes a HARQ-ARQ interaction scheme for reliable communication between the smart ships. Moreover, this paper evaluates the performance of the HARQ-ARQ interaction schemes through the computer simulation. In the HARQ-ARQ interaction scheme for marine network systems, as a HARQ acknowledgement is implicitly utilized as an ARQ acknowledgement. Hence, the HARQ-ARQ interaction scheme can reduce the packet delay. However, the HARQ-ARQ interaction scheme has problems caused by the error of HARQ feedback messages. Hence, this paper considers the effect of error of HARQ feedback messages on the performance of the HARQ-ARQ interaction scheme, in marine network systems. The simulation results show that the HARQ-ARQ interaction scheme can improve the delay performance of the ships in the marine network systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2736-2750
• /
• 2022

As demands for the maritime communications increase, a variety of functions and information are required to exchange via elements of maritime systems, which leads communication traffic increases in maritime frequency bands, especially in VHF (Very High Frequency) band. Thus, effective resource management is crucial to the future maritime communication systems not only to the typical terrestrial communication systems. VHF data exchange system (VDES) enables to utilize more flexible configuration according to the communication condition. This paper focuses on the VDES communication system among VDES terminals such as shore stations, ship stations and aids to navigation (AtoN) to address efficient resource allocation. We propose a resource management method considering a MIMO (Multiple Input Multiple Output) technique in VDES, which has been widely used for modern terrestrial wireless networks but not for marine environments by scheduling the essential communication resources. We introduce the general channel model in marine environment and give two metrics, spectral and the energy efficiencies to examine our resource scheduling algorithm. Based on the simulation results and analysis, the proposed method provides a possibility to enhance spectral and energy efficiencies. Additionally, we present a trade-off relationship between spectral and energy efficiencies. Furthermore, we examine the resource efficiencies related to the imperfect channel estimation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.13-20
• /
• 2012

This paper proposes a marine engine state monitoring system using a DPQ (Distributed Precedence Queue) mechanism which collects the state of bearings, temperature and pressure of engine through the CAN network. The CAN is developed by Bosch Corp. in the early 1980' for automobile network. The data from various sensors attached in the marine engine are converted to digital by the analog to digital converter and formatted to fit the CAN protocol at the CAN module. All the CAN modules are connected to the SPU (Signal Processing Unit) module for the efficient communication and processing. This design reduces the cost for wiring and improves the data transmission reliability by recognizing the sensor errors and data transmission errors. The DPQ mechanism is newly developed for the performance improvement of the marine engine system, which is demonstrated through the experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.101-106
• /
• 2013

This paper proposes the new high precision monitoring sensor for the Marine Installation. Among variety of sensor network systems, wireless information transmission through the marine is one of the enabling technologies for the development of future marine-observation systems and sensor networks. Applications of marine monitoring range from oil industry to aquaculture, and include instrument monitoring, pollution control, climate recording, prediction of natural disturbances. For these marine applications to be available, however, the provision of precise location information using monitoring sensor is essential. In this paper, the dynamic characteristics for obtaining the location information of monitoring sensor is analyzed. The theoretical and experimental studies have been carried out. The presented results from the above investigation show considerably excellent performance for the Monitoring for the Marine Installation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3329-3350
• /
• 2017

Installing caching and computing facilities in mobile edge networks is a promising solution to cope with the challenging capacity and delay requirements imposed on future mobile communication systems. The problem of optimal facility placement in mobile edge networks has not been fully studied in the literature. This is a non-trivial problem because the mobile edge network has a unidirectional topology, making existing solutions inapplicable. This paper considers the problem of optimal placement of a fixed number of facilities in a mobile edge network with an arbitrary tree topology and an arbitrary demand distribution. A low-complexity sequential algorithm is proposed and proved to be convergent and optimal in some cases. The complexity of the algorithm is shown to be $O(H^2{\gamma})$, where H is the height of the tree and ${\gamma}$ is the number of facilities. Simulation results confirm that the proposed algorithm is effective in producing near-optimal solutions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.2
• /
• pp.136-140
• /
• 2011

Monitoring of water surfaces through permanent measurement of hydrodynamic and meteorological data is one of the main requirements in safe and sustainable water management. The Caspian Sea, the major surface water body in Iran, significantly affects more than 600 km of urban and industrial coastline. In the present work, an integrated marine monitoring network for the entire southern coastline of the Caspian Sea was developed. The main design concerns centered on the network measuring components and data recording, checking, filtering, gap recognition, and transferring systems. Four coastal monitoring stations were assigned, along with two regional collecting stations and one central data station for gathering, checking and delivering recorded data at different access levels. Applicable guidelines on selection of measuring devices for both shallow and deep water zones are presented herein.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1275-1280
• /
• 2014

In this study, the performance of a real-time micro telescopic monitoring system is evaluated, in which an artificial neural network is adopted for the diagnoses of vibratory bodies, such as solid piping system or machinery. The structural vibration was measured by a non-contact remote sensing method, in which images of a high-speed high-definition camera were used. The structural vibration data that can be obtained by the PIV (particle image velocimetry) technique were used for training the neural network. The structures of the neural network are dynamically changed and their performances are evaluated for the constructed diagnosis system. Optimized structures of the neural network are proposed for real-time diagnosis for the piping system. It was experimentally verified that the performances of the neural network used for real-time monitoring are influenced by the types of the vibration data, such as minimum, maximum and average values of the vibration data. It concludes that the time-mean values are most appropriate for monitoring the piping system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.480-487
• /
• 1999

In this paper we propose a neural network precompensated PID(NNP PID) controller for load frequency control of 2-area power system. While proportional integral derivative(PID) controllers are used in power system they have many problems because of high nonlinearities of the power system So a neural network-based precompensation scheme is adopted into a conventional PID controller to obtain a robust control to the nonlinearities. The applied neural network precompen-sator uses an error back-propagation learning algorithm having error and change of error as inputand considers the changing component of forward term of weighting factor for reducing of learning time. Simulation results show that the proposed control technique is superior to a conventional PID controller and an optimal controller in dynamic responses about load disturbances. The pro-posed technique can be easily implemented by adding a neural network precompensator to an existing PID controller.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.309-314
• /
• 2012

In this paper, we present surface-to-underwater visible light communication systems using white LEDs. Pulse position modulation (PPM)-based analogue data communications and on-off keying-based digital data communications systems are developed. Inexpensive and commercial power-LEDs and photo-diodes are used to construct two types of systems. We report the experimental results obtained from the prototype systems to show the possibility of an optical underwater visible light transceiver as a basis for short range underwater wireless network. Their performance deteriorates more than the atmosphere's one because of attenuation and scattering of the light in water, but these results are promising for the potential to create more robust network interface that improve medium performance such as a LED modulation and a photo-detector demodulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.39-45
• /
• 2005

Recently, RFID technology play a key role to implement ubiquitous sensor network(USN). In this paper, we introduce trends of RFID technology, standardization, and then its applications. The purpose of this work is to suggest prosperous applications of RFID, which is applicable on marine information system, such as ship inventory management, management of container and its contents, sensing of environments within cargo hold, management of fishery boats. In case that RFID technology is utilized on marine information systems, it makes safety at sea and marine environments protection.