• 제목/요약/키워드: Material Nonlinearity

검색결과 498건 처리시간 0.026초

재료비선형을 고려한 복합적층판의 진동해석 (Vibration Analysis of Composite Laminated Plates Considered in Material-Nonlinearity)

  • 석근영;강주원;신영식
    • 한국공간구조학회논문집
    • /
    • 제6권4호
    • /
    • pp.45-52
    • /
    • 2006
  • 재료적으로 강한 비선형성을 나타내는 FRP 복합적층판을 진동해석을 수행하였다. 적층판의 적층각도와 순서에 따른 선형해석의 결과와 비선형해석의 결과를 비교, 검토하였다. 본 연구는 FRP 복합적층판의 비선형해석시 동적거동 특성을 예측하기 위한 기초적 연구로써 변위를 비교, 분석한다.

  • PDF

Effects of Material Nonlinearity on Seismic Responses of Multistoried Buildings with Shear Walls and Bracing Systems

  • Islam, Md. Rajibul;Chakraborty, Sudipta;Kim, Dookie
    • Architectural research
    • /
    • 제24권3호
    • /
    • pp.75-84
    • /
    • 2022
  • Scads of earthquake-resistant systems are being invented around the globe to ensure structural resistance against the lateral forces induced by earthquake loadings considering structural safety, efficiency, and economic aspects. Shear wall and Bracing systems are proved to be two of the most viable solutions for seismic strengthening of structures. In the present study, three numerical models of a G+10 storied building are developed in commercial building analysis software considering shear wall and bracing systems for earthquake resistance. Material nonlinearity is introduced by using plastic hinges. Analyses are performed utilizing two dynamic methods: Response Spectrum analysis and nonlinear Time-history analysis using Kobe and Loma Prieta earthquake data and results are compared to observe the nonlinear behavior of structures. The outcomes exposed that a significant increase in the seismic responses occurs due to the nonlinearity in the building systems. It was also found that building with shear wall exhibits maximum resistance and minimum nonlinearity when subjected to dynamic loadings.

열처리된 재료의 초음파 비선형성에 관한 연구 (Study of Ultrasonic Nonlinearity in Heat-Treated Material)

  • ;이재선;조윤호
    • 대한기계학회논문집A
    • /
    • 제34권6호
    • /
    • pp.751-756
    • /
    • 2010
  • 비선형 초음파는 선형 초음파와 비교하였을 때 재료의 물성 변화에 민감하게 반응한다. 이 연구의 목표는 비선형 요소를 포함하여 열처리 조건과 초음파 비선형성의 상관관계를 알아내는 것이다. 본 연구에서 기존의 방법과는 다른 수정된 초음파속도계산 식이 새롭게 제안되었다. 이것은 열처리된 재질에서 초음파 속도변화가 재료의 비선형성 때문에 발생하는 것을 찾아내었다. 실험을 통하여 수정된 초음파 속도와 1차 조화 및 2차 조화파의 진폭 비율이 서로 동일한 경향을 보이는 것을 알아냈다. 그리고 수정된 초음파속도식을 통해 계산된 상대적인 비선형계수는 기존의 방법을 이용하였을 때보다 더 민감함을 알아냈다.

3차원 강뼈대구조의 비선형 해석 (Nonlinear Analysis of 3-D Steel Frames)

  • 김승억;김요숙;최세휴;김성모;최준호
    • 한국강구조학회 논문집
    • /
    • 제11권4호통권41호
    • /
    • pp.417-424
    • /
    • 1999
  • 본 논문에서는 3차원 강뼈대구조물의 비선형 해석 기법을 개발하였다. 본 해석은 재료적 비선형과 기하학적 비선형을 고려하였다. 재료적 비선형으로 휨에 의한 점진적인 소성화를 고려하였다. 기하학적 비선형으로 $P-{\delta}$$P-{\Delta}$ 효과를 고려하였다. 절점에서의 재료적 비선형성은 여러개의 화이버로 구성되어 있는 P-M 힌지 개념을 사용함으로써 고려하였다. 기하학적 비선형성은 안정함수 (Stability function)를 사용하여 고려하였다. 단 전단과 비틀림에 의해 발생하는 비선형형은 고려하지 않았다. 수치해석법으로는 수정변위증가법을 사용하였다. 본 연구에서 제안된 해석방법으로 예측된 하중-변위가 다른 해석기법의 결과들과 잘 일치하였다.

  • PDF

A 3D co-rotational beam element for steel and RC framed structures

  • Long, Xu;Tan, Kang Hai;Lee, Chi King
    • Structural Engineering and Mechanics
    • /
    • 제48권5호
    • /
    • pp.587-613
    • /
    • 2013
  • A 3-node 3D co-rotational beam element using vectorial rotational variables is employed to consider the geometric nonlinearity in 3D space. To account for shape versatility and reinforced concrete cross-sections, fibre model has been derived and conducted. Numerical integration over the cross-section is performed, considering both normal and shear stresses. In addition, the derivations associated with material nonlinearity are given in terms of elasto-plastic incremental stress-strain relationship for both steel and concrete. Steel reinforcement is treated as elasto-plastic material with Von Mises yield criterion. Compressive concrete behaviour is described by Modified Kent and Park model, while tensile stiffening effect is taken into account as well. Through several numerical examples, it is shown that the proposed 3D co-rotational beam element with fibre model can be used to simulate steel and reinforced concrete framed structures with satisfactory accuracy and efficiency.

구조용 막재료의 재료 비선형성 평가기법 (An Evaluation Method on the Material Nonlinearity of the Structural Membrane)

  • 한상을;이승훈
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.197-204
    • /
    • 2001
  • The purpose of this paper is to develope the evaluation technique to find proper elastic constants that characterize the material nonlinearity of structural membrane. The stress-strain curves of membrane material show strong nonlinearity. But generally the analysis is carried out under the assumption on material linear and geometrical nonlinear method. Because, it is very difficult to evaluate proper tangential stiffness. This paper use multi-step-linear approximation method taking the concept of effective stress for the evaluation of stiffness of membrane material, and then compare the results between linear and nonlinear analysis. Also. it shows better results than linear method

  • PDF

섬유다발의 굴곡도에 따른 유연직물복합재료의 등가탄성계수 예측 (Prediction of Equivalent Elastic Modulus for Flexible Textile Composites according to Waviness Ratio of Fiber Tows)

  • 서영욱;김성준;안석민
    • 항공우주기술
    • /
    • 제9권2호
    • /
    • pp.73-79
    • /
    • 2010
  • 본 연구에서는 비선형 유한요소 해석을 수행하여 굴곡도에 따른 유연직물복합재료의 등가 탄성계수를 예측하였다. 해석은 상용 유한요소 해석 프로그램인 ABAQUS를 사용하여 수행되었다. 해석에서는 섬유다발의 재료적 비선형성과 대변형 시 발생하는 기하학적 비선형성이 고려되었으며, 섬유다발의 대 전단 변형으로 발생하는 기하학적 비선형성을 고려하기 위하여 사용자 부프로그램을 작성하여 이를 ABAQUS내에 삽입하였다. 결과에서는 일축하중 상태에 있는 유연직물복합재료의 응력-변형률 거동을 예측하여 이로부터 계산된 등가탄성계수를 시험결과와 비교하였으며, 다양한 섬유 굴곡도를 갖는 유연직물복합재료에 대한 등가탄성계수를 계산하였다.

유효탄성계수를 이용한 균열 비선형 및 재료 비선형을 고려한 파단전누설(LBB) 평가 방법 (Leak-Before-Break (LBB) Assessment Method Considering Crack Nonlinearity Using Effective Elastic Modulus and Material Nonlinearity)

  • 김만원;김성환;이의종
    • 대한기계학회논문집A
    • /
    • 제35권6호
    • /
    • pp.651-659
    • /
    • 2011
  • 최근 열출력이 향상된 신규 원자력발전소의 개발이 증가하고 있으며 배관계에 가해지는 모멘트 및 하중의 크기도 증가하는 경향이므로 배관의 파단전누설(LBB) 적용조건 여유도가 작아질 수 있다. 본 논문에서는 이러한 배관에서 LBB 적용조건을 만족시키기 위한 추가적인 여유도 확보의 한 방법으로써 균열의 비선형과 재료물성치를 고려하는 방법을 제시하였다. 균열 및 재료의 비선형을 고려하기 위하여 유한요소해석과 보(beam) 이론을 병용하였다. 원자력 배관을 모델로 하여 본 논문에서 제안한 방법으로 LBB 균열안정성 해석을 수행하였으며, LBB 여유도가 낮은 위치에서 균열 및 재료 비선형을 고려함으로 써 추가적인 LBB 여유도를 확보할 수 있음을 확인하였다.

체적파 혼합기법을 이용한 재료 손상 진단 적용 가능성 연구 (Feasibility Study on Diagnosis of Material Damage Using Bulk Wave Mixing Technique)

  • 최정석;조윤호
    • 비파괴검사학회지
    • /
    • 제36권1호
    • /
    • pp.53-59
    • /
    • 2016
  • 초음파 비선형 진단을 이용한 기법의 경우 재료의 단순 결함 검출뿐만 아니라 부식, 소성변형과 같은 미세손상을 평가할 때 주로 이용된다. 1차 조화파(primary wave)와 2차 조화파(second harmonic wave)의 진폭의 비를 이용하여 비선형성을 나타내며, 이러한 비선형성의 비교 결과를 진단에 사용한다. 실험 특성상 비선형성은 재료의 비선형성뿐만 아니라 장비의 비선형성 또한 포함하게 된다. 장비 비선형성은 사용자가 측정하고자 하는 값이 아니므로 오차로 작용하여 분석을 방해한다. 본 연구에서는 오차로 작용하는 장비의 비선형성을 감소시켜 보다 정확한 진단을 위해 체적파 혼합기법을 사용하였다. 체적파 혼합기법의 가장 큰 특징은 기존의 초음파 비선형 진단보다 장비의 비선형성을 줄일 수 있다는 점이다. 본 연구에서는 체적파 혼합기법을 이론 및 실험적으로 검증하였으며, 기존의 초음파 비선형 진단기법의 결과와 체적파 혼합기법의 결과를 비교하여 장단점 및 적용 가능성 분석에 초점을 두었다.

재료비선형을 고려한 일방향-평직 혼합 적층 복합재 체결부의 점진적 파손해석 (Progressive Failure Analysis of UD-Fabric Hybrid Laminated Composite Joints Considering Material Nonlinearity)

  • 최정석;신소영;안현수;권진회
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2002년도 추계학술발표대회 논문집
    • /
    • pp.79-82
    • /
    • 2002
  • A finite element method based on the two-dimensional progressive failure analysis considering material nonlinearity is presented for characterizing the strength and failure of the unidirectional-fabric hybrid laminated composite joints under pin loading. The 8-node laminated shell element is incorporated in the updated Lagrangian formulation. Failure criteria including the Maximum Stress and Tsai-Wu are used in conjunction with the complete unloading stiffness degradation method. For the verification, joint tests are conducted for the specimens with two different ply-number ratios of UD composite to fabric composite. Although there are some differences depending on ply-number ratios, the finite element model using the maximum stress criterion considering nonlinear material behavior predicts the failure strength best.

  • PDF