• 제목/요약/키워드: Material safety data sheet

검색결과 64건 처리시간 0.023초

Evaluation of Hazardous Chemicals with Material Safety Data Sheet and By-products of a Photoresist Used in the Semiconductor-Manufacturing Industry

  • Jang, Miyeon;Yoon, Chungsik;Park, Jihoon;Kwon, Ohhun
    • Safety and Health at Work
    • /
    • 제10권1호
    • /
    • pp.114-121
    • /
    • 2019
  • Background: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. Methods: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. Results: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. Conclusion: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

N, N-dimethylformamide 취급근로자의 유해위험 정보 인식도 조사 (A study on chemical hazard communication for workers exposed to N, N-dimethylformamide)

  • 양정선;임철홍;이혜진
    • 한국산업보건학회지
    • /
    • 제21권2호
    • /
    • pp.103-109
    • /
    • 2011
  • Object: we investigated some factors which can affect workers' comprehension of chemical hazard information and their actions to protect themselves from the hazard. Method: Comprehension score of chemical hazard information and the rate of wearing personal protective equipment (PPE) was surveyed for the 109 workers from 15 factories who were exposed to N, N-dimethylformamide. Difference of the worker's comprehension score of hazard information was analyzed by education interval, work duration and the way of occupational safety and health management between self-managed or sub-contracted. Result: Mean comprehension score of N, N-dimethylformamide hazard, which was given as a short quiz composed of 10 "true" or "false" problems, was 65%. Mean percentage of wearing PPE was improved as the education program was done within a month but decreased after 6 months. Eighty seven % of workers got the chemical hazard information from the material safety data sheet placed at workplace. Conclusion: Education interval and comprehension score affected the rate of wearing PPE. The way of occupational safety and health management self-managed or sub-contracted did not affect the workers' comprehension score on hazard information nor the rate of wearing PPE.

구강보건의료기관 종사들의 유해화학물질 인식, 실천 및 물질안전보건자료 (MSDS) 관리에 영향을 미치는 요인 (Factors Affecting the Recognition and Practice of Hazardous Chemical Substance & the Management of Material Safety Data Sheet (MSDS) among Workers in Dental Clinics)

  • 정혜영;문원숙;김지영
    • 대한통합의학회지
    • /
    • 제9권3호
    • /
    • pp.79-86
    • /
    • 2021
  • Purpose : This study was conducted to provide fundamental data to prepare for countermeasure to protect health of workers in the dental clinics from hazardous chemical substance, and to assess effecting factors on management of Material Safety Date Sheet(MSDS) and handling of hazardous chemical substance among workers in dental clinics. Methods : This study was carried out a survey with structured self-administered questionnaire which was consisted of 7 questions about the management of MSDS, 9 questions about recognition and practice of hazardous chemical substances in dental clinics, and 7 questions about general characteristics. Total subjects of this study were 204 adult who workers in dental clinics located in Busan and Gyeng-nam province area. The collected data were analysed using the SPSS statistical package program (ver. 23.0). Results : The factor that positively affected factor on recognition and practice of hazardous chemical substances in dental clinics has experience that has been institutional health-care accreditation. The factor that positively affected the management of MSDS has experience that has been institutional health-care accreditation. Conclusion : It is necessary to prepare countermeasures such as campaign and education on cognition of general chemical substances, and also the author concern that it should be perform the education on handling of hazardous chemical substances in dental clinics for more effecting management of MSDS. In order to improve the management of MSDS and improve the awareness and safety of chemicals, it is necessary to encourage the implementation of the institutional health-care accreditation system or prepare guidelines for the management of MSDS.

MSDS (Material Safety Data Sheet)를 위한 벤질알코올 연소특성치의 측정 및 예측 (The Measurement and Prediction of the Combustible Properties of of Benzyl-Alcohol for MSDS (Material Safety Data Sheet))

  • 하동명
    • Korean Chemical Engineering Research
    • /
    • 제55권2호
    • /
    • pp.190-194
    • /
    • 2017
  • 사업장에서 화재 및 폭발을 예방하기 위해서는 연소특성치로 인화점, 폭발한계, 최소자연발화온도 등을 들 수 있다. 화학공정의 안전을 위해서 취급 물질의 정확한 물질보건안전자료(MSDS)의 연소특성치 사용은 매우 중요하다. 화학산업에서 다양하게 사용되고 있는 벤질알코올의 안전한 취급을 위해서 인화점과 최소자연발화온도를 측정하였다. 벤질알코올의 폭발하한계는 실험에서 얻어진 하부인화점을 이용하여 계산하였다. 벤질알코올의 Setaflash 밀폐식은 $90^{\circ}C$, Pensky-Martens 밀폐식에서는 $93^{\circ}C$ 그리고 Tag 개방식에서는 $97^{\circ}C$, Cleveland 개방식에서는 $100^{\circ}C$로 측정되었다. ASTM E659 장치에 의한 측정된 벤질알코올의 최소자연발화온도는 $408^{\circ}C$로 측정되었다. Setaflash 밀폐식에 의해 측정된 벤질알코올의 하부인화점 $90^{\circ}C$의 폭발하한계는 1.17 vol%로 계산되었다. 본 연구에서는 Setaflash 밀폐식에 의해 측정된 벤질알코올의 하부인화점을 이용하여 폭발하한계의 예측이 가능하였다.

산업안전보건관리자 특성과 화학물질 유해성 정보전달의 관련성 (Association Between Communication for Chemical Hazards Information and Characteristics of Occupational Safety and Health manager)

  • 김기웅;박진우;정무수
    • 한국산업보건학회지
    • /
    • 제22권2호
    • /
    • pp.156-163
    • /
    • 2012
  • Objectives: The aim of the present study was undertaken to investigate the association between communication for chemical hazard information and characteristics of occupational safety and health managers. Subjects and Methods: We surveyed 78 occupational safety and health managers(64 male and 14 female) in 78 chemical manufacturing plants. Data were obtained using a self-reported questionnaire about size and type of company, products, communication system for chemicals and work-related characteristics of occupational safety and health managers. All analyses in this study were performed using SPSS program 12.0. Results: 64.1% of the study participants were occupational health managers aged 39.3 years on average and were graduated from college and university around 90%. 30.0% and of them were majoring in chemistry (engineering chemistry), 18.0% occupational health, 16% nursing and 30.0% others. Occupational safety managers were aged 39.4 years on average, 42.9% of them were majoring in chemistry (engineering chemistry), 21.4% environmental engineering, 10.7% occupational safety and 25% others. 86% of occupational health managers and 71.4% of occupational safety managers were classified as office job. Over 94% of the hazards information for chemicals were delivered by occupational safety and health managers, but about 28.2% workers preferred outside experts who have a profound knowledge about occupational safety and health and understandable. Occupational safety and health managers and workers had difficulties in understanding toxicological information, hazards identification, stability/reactivity, composition/information on ingredients, physical/chemical properties and ecological information. On multiple logistic regression analysis for the 16 heading of material safety data sheet, content of material safety data sheet was significantly associated with education level (odds ratio=0.286, 95% confidence interval=0.105-0.780). The hazard identification (odds ratio=3.947, 95% confidence interval=1.092-14.271) and toxicological information (odds ratio=0.841, 95% confidence interval=0.705-0.998) were significantly associated with type of occupation. Conclusions: This finding implies that the education level, type of occupation and speciality of occupational safety and health managers may affects hazards information delivery.

테트랄린의 연소특성치 평가에 관한 연구 (A Study of the Evaluation of Combustion Properties of Tetralin)

  • 하동명
    • 한국안전학회지
    • /
    • 제33권4호
    • /
    • pp.8-14
    • /
    • 2018
  • In the industrial chemical process involving combustible materials, reliable safety data are required for design prevention, protection and mitigation measures. The accurate combustion properties are necessary to safely treatment, transportation and handling of flammable substances. The combustion parameters necessary for process safety are lower flash point, upper flash point, fire point, lower explosion limit(LEL), upper explosion limit(UEL)and autoignition temperature(AIT) etc.. However, the combustion properties suggested in the Material Safety Data Sheet (MSDS) are presented differently according to the literatures. In the chemical industries, tetralin which is widely used as a raw material of intermediate products, coating substances and rubber chemicals was selected. For safe handling of tetralin, the lower and flash point, the fire point, and the AIT were measured. The LEL and UEL of tetralin were calculated using the lower and upper flash point obtained in the experiment. The flash points of tetralin by using the Setaflash and Pensky-Martens closed-cup testers measured $70^{\circ}C$ and $76^{\circ}C$, respectively. The flash points of tetralin using the Tag and Cleveland open cup testers are measured $78^{\circ}C$ and $81^{\circ}C$, respectively. The AIT of the measured tetralin by the ASTM E659 apparatus was measured at $380^{\circ}C$. The LEL and UEL of tetralin measured by Setaflash closed-cup tester at $70^{\circ}C$ and $109^{\circ}C$ were calculated to be 1.02 vol% and 5.03 vol%, respectively. In this study, it was possible to predict the LEL and the UEL by using the lower and upper flash point of tetralin measured by Setasflash closed-cup tester. A new prediction method for the ignition delay time by the ignition temperature has been developed. It is possible to predict the ignition delay time at different ignition temperatures by the proposed model.

방향족 탄화수소 화학물질 제조사업장의 MSDS 신뢰성 평가 연구 (MSDSs Reliability Evaluation in Workplaces Manufacturing Aromatic Hydrocarbon)

  • 이권섭;최진희;조지훈;최성봉;이종한;양정선
    • 한국산업보건학회지
    • /
    • 제19권4호
    • /
    • pp.370-380
    • /
    • 2009
  • Reliable hazard and risk communication is needed to prevent the safety accident & occupational disease through right use of chemicals and MSDS(Material Safety Data Sheet) is mainly used as such a tool of communication. MSDS policy has been put into effect in order to prevent the safety accident & occupational disease through right use of chemicals and fulfill workers' right to know. If information on MSDS lacks reliability due to its inaccuracy, prevention of the various effects related with environmental safety & health in advance is not possible to achieve. The most essential thing regarding authoring MSDS is to exactly evaluate the composition and ingredients of the chemical and include reliability-guaranteed information. Therefore, in this study reliability was evaluated on MSDSs in 15 aromatic hydrocarbons(benzene, toluene, xylene, etc.) manufacturers and ways to secure reliability of MSDS were suggested. The results showed 93.5% of composition agreement rate and 89% of reliability on each section in MSDSs. In order to curb MSDSs with low reliability, examination on CBI(confidential business information) in MSDS, certification of MSDS, collection and verification of MSDS are suggested.

산류(Acids)의 인화점과 최소자연발화온도의 신뢰성 고찰 (Investigation of Reliability of Flash Points and Autoignition Temperatures of Acids)

  • 하동명
    • 한국안전학회지
    • /
    • 제24권2호
    • /
    • pp.42-47
    • /
    • 2009
  • The flash point and the AIT(auto-ignition temperature) are the most important combustible properties used to determine the potential for the fire and explosion hazards of flammable material. In order to know the accuracy of data in MSDS(Material Safety Data Sheet), the flash point of n-acids were measured by using Pensky-Martens closed cup tester(ASTM D93), Setaflash closed cup tester(ASTM D3278), Tag open cup tester(ASTM D1310) and Cleveland open cup tester(ASTM D92). Also, the AIT of n-acids were measured by using ASTM E659-78 tester. The measured the flash points and the AIT were compared with literatures and MSDS in KOSHA. The measured the flash points and the AIT were different from those in literatures and MSDS. Therefore, This paper shows that it is needed to investigate the MSDS compatibility of n-acids for the fire safety objectives.

사업장 MSDS 영업비밀 적용실태 및 제도 개선방안에 관한 연구 (A study on the actual conditions of trade secrets in the MSDS and the improvement of the relevant system)

  • 이종한;이권섭;박진우;한규남
    • 한국산업보건학회지
    • /
    • 제21권3호
    • /
    • pp.128-138
    • /
    • 2011
  • Objectives: It has been pointed out that there are problems in handling and managing chemicals due to trade secrets of Material Safety Data Sheet(MSDS). To date, some company intentionally leave out of several parts and use an inaccurate expression in MSDS. In particular, with the result of the inspection of the government and labour community, it is required that the 2nd section in MSDS included the composition and information on ingredients has to be provided with comprehensive expression to secure more reliability. Methods: Therefore, this study is aimed: 1) to recognize the current status of trade secrets of MSDS in workplaces with both domestic manufacturers of chemical products and multinational corporations; 2) to make contributions to prevention of the industrial accidents by providing the accurate information of MSDS; 3) to improve the risk communication system related with chemicals; 4) to impress workers on the importance of right of known for MSDS. With the result we analyzed the status of trade secrets in MSDS in 73 companies, such as petrochemistry production, paint production, metal processing oil production, detergent production, and international company related with chemicals, we have found that 38,150 (45.5%) have the trade secrets parts in the total number of 83,832 in MSDS. Also, based on the 288 MSDS gathered by the Occupational Safety and Health Research Institute (OSHRI) from 2005 to 2009, 41.7% of the MSDS are classified into the trade secrets. Conclusions: Therefore, to procure an assurance system of MSDS, we suggest that a MSDS picking up and checking system be legislated in the Occupational Safety and Health Act to protect workers from the unidentified chemical hazards due to the secret trade of MSDS.

웹기반 재료 DB 구축 및 3D 그래프를 사용한 물성비교 (Construction of web-based material DB and comparison of material properties using 3D graph)

  • 천두만;안성훈
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.724-727
    • /
    • 2005
  • Material selection is one of the important activities in design and manufacturing. A selected material at the conceptual design stage affects material properties of the designed part as well as manufacturability and cost of the final product. Unfortunately there are not many accessible material databases that can be used for design. In this research, a web-based material database was constructed. In order to assist designers to compare different materials, two-dimensional and three-dimensional graphs were provided. Using these graphical tools, multi-dimensional comparison was available in more intuitive manner. To provide environmental safety of materials, the database included National Fire Protection Association publication Standard No.704. The web-based tool is available at http://fab.snu.ac.kr/matdb.

  • PDF