• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.909-912
• /
• 2000

We synthesized polypyrrole (PPy) nanotubules by oxidative polymerization of the pyrrole monomer within the pores of a polycarbonate template. The electrochemical behavior was investigated using cyclic voltammetry. The redox potential was about -0.5 V vs. Ag/AgCl reference electrode, while the potential was about 0 V for PPy film. It is considered as the backbone grows according to the pore wall. Therefore, it is possible to be arranged regularly. That leads to improvement in the electron hopping. By electrochemical doping of glucose oxidase (GOx) on PPy nanotubules, an enzyme electrode has been fabricated. The kinetic parameter of biochemical reaction with glucose was evaluated. The formal Michaelis constant and maximum current calculated by computer were about 11.4 mmol $dm^3$ and 170.85 A respectively. Obviously, an affinity for the substrate and current response of the PPy nanotubules enzyme electrode are rather good, comparing with that of PPy film.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.113-118
• /
• 2011

When butyl rubber dissolved in toluene was used as a binder of carbon powder, carbon paste showed a mechanical hardness due to the fast volatility of the solvent just after the electrode fabrication. With a view of validating its quantitative electrochemical behaviors, its kinetic parameters, e.g. the symmetry factor, the exchange current density, the capacity of the double layer, the Michaelis constant, the time constant and other factors were investigated. Our experimental facts indicated that butyl rubber is available for a promising binder of carbon powder.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.621-626
• /
• 2002

In the case of immobilizing of glucose oxidase (GOx) in polypyrrole (PPy) conducting polymer using electrosynthesis, the GOx obstructs charge transfer and mass transport during the film growth. This may lead to short chained polymer and/or make charge-coupling weak between the GOx and the backbone of the PPy. That is mainly due to insulating property and net chain of the GOx. Since being the case, it is useless to increase in amount of GOx mere than reasonable in the synthetic solution. We improved the amount of immobilized GOx into the PPy by adding a little ethanol in the synthetic solution without any more amount of GOx in the solution. We electrochemically analyzed an improvement in the immobilizing event. For the glucose sensing, when ethanol was added by 0.1 mol $dm^{-3}$ in the synthetic solution, the Michaelis constant of the resulting enzyme electrode was about 32 mmol $dm^{-3}$ and maximum current was about $146\mu A$.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.1
• /
• pp.66-73
• /
• 2015

The pabS gene of Agaricus bisporus 02 encoding a putative PABA synthase was cloned, and then the recombinant protein was expressed in Escherichia coli BL21 under the control of the T7 promoter. The enzyme with an N-terminal GST tag or His tag, designated GST-AbADCS or His-AbADCS, was purified with glutathione Sepharose 4B or Ni Sepharose 6 Fast Flow. The enzyme was an aminodeoxychorismate synthase, and it was necessary to add with an aminodeoxychorismate lyase for synthesizing PABA. AbADCS has maximum activity at a temperature of approximately 25℃ and pH 8.0. Magnesium or manganese ions were necessary for the enzymatic activity. The Michaelis-Menten constant for chorismate was 0.12 mM, and 2.55 mM for glutamine. H₂O₂ did distinct damage on the activity of the enzyme, which could be slightly recovered by Hsp20. Sulfydryl reagents could remarkably promote its activity, suggesting that cysteine residues are essential for catalytic function.

• Analytical Science and Technology
• /
• v.23 no.5
• /
• pp.505-510
• /
• 2010

When polybutadiene dissolved in toluene was a binder of carbon powder, the volatility of solvent just after electrode fabrication assured the mechanical solidity of the carbon paste electrode. This characteristic met the qualifications for practical use of carbon paste electrodes. A new enzyme electrode bound with butadiene rubber was constructed. In order to confirm whether it shows quantitative electrochemical behaviors or not, its electrochemical kinetic parameters, e.g. the symmetry factor, the exchange current density, the capacitance of double layer, the time constant, the maximum current, the Michaelis constant and other factors were investigated. These experimental facts showed that butadiene rubber is a recommendable binder for practical use of a carbon paste electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.141-146
• /
• 2002

We synthesized polypyrrole (PPy) by electrolysis of the pyrrole monomer solution containing support electrolyte, KCl and/or p-toluene sulfonic acid sodium salt (p-TS). The electrochemical behavior, was investigated using cyclic voltammetry and AC impedance. In the case of using electrolyte p-TS, the oxidation potential of the PPy was about -02 V vs Ag/AgCl reference electrode, while the potential was about 0 V for using electrolyte KCl. The falloff of the oxidation potential gave a sign of an improvement in the electron hopoing mechanism on the backbone. The AC impedance plot gave a hint of betterment of mass transport. PPy doped with p-TS improved in mass transport or diffusion. That was because the PPy doped with p-TS was more porous than PPy with KCl. We attained an effect of good kinetic parameters, in the case of PP-GOx enzyme electrodes doped with p-TS, which were determined by 58 mmol dm$\^$-3/ for apparent Michaelis constant and by 581 ㎂ for maximum current respectively.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.423-428
• /
• 1996

Optimum conditions for hydrolysis were investigated to enhance water-solubilities of protein-bound polysaccharides in the basidiocarps of Ganoderma lucidum by treating chymotrypsin. We also attempted with Ganoderma lucidum residue remaining after extracting hot water-soluble compoents in Ganoderma lucidum. After hydrolyzing under optimum conditions (20 ppm chymotrypsin, 2% Gampderma lucidum or 6% Ganoderma lucidum residue, at pH 10 and at $ 40^{\circ}C$), the amounts of total protein and carbohydrate of hydrolysate were measured. Michaelis constant, $K_{m}$, and maximum rate, $V_{max}$, calculated by Lineweaver-Buck plot for the hydrolysis of Ganoderma lucidum were 1.73% and 0.073%/min respectively and those for hydrolysis of Ganoderma lucidum residue were 2.40% and 0.033%/min respectively. The amount of polysaccharide isolated from Ganoderma lucidum (100 g) treated with chymotrypsin was only 3.07 g, but significantly increased amount (14.34 g) of polysaccharides was isolated from Ganoderma lucidum residue (100 g) treated with chymotrypsin. The protein-bound polysaccharide was isolated from the non-hydrolyzed and hydrolyzed sample and molecular weights of the polysaccharide were measured by Sepharose CL-48 gel filtration.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1724-1728
• /
• 2009

Severe acute respiratory syndrome coronavirus (SARS-CoV) helicase separates the double-stranded nucleic acids using the energy from ATP hydrolysis. We have measured ATPase activity of SARS-CoV helicase in the presence of various types of nucleic acids. Steady state ATPase analysis showed that poly(U) has two-times higher turnover number than poly(C) with lower Michaelis constant. When M13 single-stranded DNA is used as substrate, the Michaelis constant was about twenty-times lower than poly(U), whereas turnover numbers were similar. However, stimulation of ATPase activity was not observed in the presence of double-stranded DNA. pH dependent profiles of ATP hydrolysis with the helicase showed that the optimal ATPase activities were in a range of pH 6.2 ~ 6.6. In addition, ATP hydrolysis activity assays performed in the presence of various divalent cations exhibited that $Mg^{2+}$ stimulated the ATPase activity with the highest rate and $Mn^{2+}$ with about 40% rate as compared to the $Mg^{2+}$.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.857-863
• /
• 1998

A simple and new experimental method for determination of lysozyme-M. lysodeikticus cell lysis reaction and lysozyme activity was suggested using Beer's law. The UV transmittance of the solution changed with the concentration of M. lysodeikticus and the relationship between the UV transmittance and M. lysodeikticus cell concentration followed Beer's Law. In addition, it was experimentally proven that the UV transmittance of the solution was not influenced by the lysozyme concentration and product of the lysis reaction. During the lysozyme-M. lysodeikticus cell lysis reaction, thus, M. lysodeikticus cell concentration in the solution could be measured in-situ by UV-spectrophotometer. By using these experimental data, kinetic Parameters of the Michaelis-Menten equation for the lysozyme-M. lysodeikticus cell 1ysis reaction was simply determined The maximum reaction rate constant ($k_3$) and Michaelis-Menten constants were $0.1734sec^{-1}$ and $9.83{\times}10^{-6}M$ respectively. The activity of the lysozyme could also be obtained with this experiment because the lysis reaction rate of the 1ysozyme depended on its activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.147-150
• /
• 1999

In the case of immobilizing of glucose oxidase in organic polymer using electrosynthesis, the glucose oxidase obstructs charge transfer and mass transport during the film growth. This may lead to short chained polymer and/or make charge-coupling weak between the glucose oxidase and the backbone of the polymer. That is mainly due to insulating property and net chain of the glucose oxidase. Since being the case, it is useless to increase in amount of glucose oxidase more than reasonable in the synthetic solution. We establish qualitatively that amount of immobilization can be improved by adding a little ethanol in the synthetic solution. As ethanol was added by 0.1 rnol dm" in the synthetic solution, Michaelis-Menten constants of the resulting enzyme electrode decreased from 30.7 mmol $dm^{-3}$ to about 2 mmol $dm^{-3}$. That suggests increase in affinity of the enzyme electrode for glucose and in amount of the immobilized enzyme.zyme.