• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.123-127
• /
• 2009

In order to get more higher integration density of devices, it is getting to be used more and more micro via interconnection lines for interconnecting layers or devices. However, it is very important to enhance the electrical characteristic by reducing the electrical resistivity of micro via interconnection line because it affects the reliability of packaging. In this paper, Micro vias were patterned with a diameter from 10 to 100 um by increasing the step of 10 um and 100 um height and were fabricated by micromachining technology to investigate the electrical characteristic of micro via interconnection lines. These micro vias were filled with copper by electroplating process with appling pulse current mode. And the electrical characteristics of micro via interconnection lines were measured. The measured value of electrical resistivity shows with a range from 20 to $26\;m{\Omega}$. This value from micro via interconnection lines fabricated by pulse current mode electroplating process shows better result than the resistivity from than micro via interconnection lines fabricated by DC mode ($31\;m{\Omega}$).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.501-502
• /
• 2006

In-plane type micro piezoelectric micro grippers with pneumatic lines for manipulation biological cells and micro parts were designed, fabricated, and characterized. Micro grippers were fabricated through the final micro-sanding process after wafer level bonding between the etched 4' Si wafer with pneumatic channels and 4' glass wafer. Displacements between two jaws of fabricated micro grippers were linearly increased with applying voltages to piezoelectric actuator. In the case of applying 80 V, the displacement between two jaws was $160{\mu}m$. Using fabricated micro grippers, manipulation tests for biological cell and micro parts with the sizes less than $100{\mu}m$ are in process.

• Interdisciplinary Bio Central
• /
• 제3권1호
• /
• pp.1.1-1.6
• /
• 2011

Recently, with the progress of genome sequencing, materials and information for research on tomato (Solanum lycopersicum) have been systematically organized. Tomato genomics tools including mutant collections, genome sequence information, full-length cDNA and metabolomic datasets have become available to the research community. In Japan, the National BioResource Project Tomato (NBRP Tomato) was launched in 2007, with aims to collect, propagate, maintain and distribute tomato bioresources to promote functional genomics studies in tomato. To this end, the dwarf variety Micro-Tom was chosen as a core genetic background, due to its many advantages as a model organism. In this project, a total of 12,000 mutagenized lines, consisting of 6000 EMS-mutagenized and 6000 gamma-ray irradiated M2 seeds, were produced, and the M3 offspring seeds derived from 2236 EMS-mutagenized M2 lines and 2700 gamma-ray irradiated M2 lines have been produced. Micro-Tom mutagenized lines in the M3 generation and monogenic Micro-Tom mutants are provided from NBRP tomato. Moreover, tomato cultivated varieties and its wild relatives, both of these are widely used for experimental study, are available. In addition to these bioresources, NBRP Tomato also provides 13,227 clones of full-length cDNA which represent individual transcripts non-redundantly. In this paper, we report the current status of NBRP Tomato and its future prospects.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.173-173
• /
• 2005

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.9-17
• /
• 2019

Sun power generation systems which use large capacity centralized inverters have loss of power generation due to cloud and building shadows, pollution, cell deterioration, etc. To minimize loss of power generation, decentralized solar power systems using multiple micro-inverters are being proposed as an alternative. A distributed solar power system consisting of a system-connected system uses power line communication to collect data from the micro-inverters. Power line communication has the advantage of using power lines without separate lines for data transmission, but in distributed solar power generation systems that use a large number of micro-inverters, the bit error rate is less reliable due to the phenomenon caused by limited transmission power, high load interference and noise, variable signal attenuation, and impedance characteristics. So we proposed wireless intelligent controller for micro-inverter that is used to build distributed solar power systems. and we design and implement that. Further, the proposed wireless intelligent controller for micro-inverter was used to establish a small-volume solar power plant to check its function and operation.

• Animal cells and systems
• /
• 제8권3호
• /
• pp.213-220
• /
• 2004

MicroRNA and siRNA (small interfering RNA), representative members of small RNA, exert their effects on target gene expression through association with protein complexes called miRNP (microRNA associated ribonucleoproteins) and RISC (RNA induced silencing complex), respectively. Although the protein complexes are yet to be fully characterized, human EIF2C2 protein has been identified as a component of both miRNP and RISC. In this report, we raised antiserum against EIF2C2 in order to begin understanding the protein complexes. An immunoblot result indicates that EIF2C2 protein is ubiquitously expressed in a variety of cell lines from human and mouse. EIF2C2 protein exists in both cellular compartments, as indicated by an immunoblot assay with a nuclear extract and a cytosolic fraction (S100 fraction) from HeLa S3 lysate. Depletion of EIF2C1 or EIF2C2 protein resulted in a decrease of microRNA, suggesting a possible role of these proteins in microRNA stability or biogenesis. We also prepared antiserum against dsRNA binding protein PACT, whose homologs in C. elegans and Drosophila are known to have a role in the RNAi (RNA interference) pathway. The expression of PACT protein was also observed in a wide range of cell lines.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.788-791
• /
• 2004

입자크기가 수 nm인 고농도 은 나노 졸을 이용하여 잉크젯 기법으로 은 미세라인을 형성하고자 하였다. 고분자전해질을 사용하여 합성한 $10wt\%$ 농도의 은 나노 졸의 입자크기는 10nm 이하였으며, 은 나노 졸을 이용한 미세 라인의 인쇄특성은 은 나노 졸의 접촉각에 매우 깊은 관계를 갖고 있었다. 순수한 ITO 기판에서 은 나노 졸은 높은 접촉각을 나타내었으며, dot 형상이 나타났다. 그러나 100ppm의 Polyethylenimine(PEI)을 코팅한 ITO 기판은 젖음성이 크게 개선되었으며, 잉크젯 기법을 이용하여 $60\~100{\mu}m$의 선폭을 갖는 은 나노 졸의 미세라인 형성이 가능함을 확인할 수 있었다.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.79.1-79
• /
• 2003

Two pathogen-induced hot pepper transcription factors (CaNACl and CapIfl) were introduced into‘MicroTom’tomato by Agrobacterium tumefaciens-mediated transformation. We used to nptII containing kanamycin resistance gene as a selection marker. Both transformed and non-transformed plants were transferred to pot after rooting test in vitro. To approximate the levels of caNACl transcript in leaves of wild-type and transgenic plants, RNA blots were hybridized with double-stranded full-length CaNACl probe at moderate stringency, Although the relative signal strength for hybridization fluctuated among the samples on different blots, transgenic plant lines N-1, N-2 and N-3 consistently displayed increased levels of CaNACl transcript relative to other transgenic lines and wild-type plants. Of all the transgenic lines examined, line N-7 had the least amount of CaNACl transcript. Role of these transcription factors in pathogen defense will be examined by overexpression in tomato.

• 한국정보전자통신기술학회논문지
• /
• 제2권2호
• /
• pp.63-68
• /
• 2009

We study on the transient response in non-uniform microstrip lines with optically controlled microwave pulses. The transient response of the microwave pulses in plasma layer has been evaluated by reflection function of dielectric microstrip lines. The variation of characteristic response in plasma layer with localized pulses has been evaluated analytically. Reflection the change of the reflection amplitude has been observed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1277-1280
• /
• 2005

A high-aspect-ratio and high-resolution stainless steel shadow mask for organic thin-film transistors (OTFTs) circuit has been fabricated by a new method which combines photochemical machining, micro-electrical discharge machining (micro-EDM), and electrochemical etching (ECE). First, connection lines and source-drain holes are roughly machined by photochemical etching, and then the part of source and drain holes is finished by the combination of micro-EDM and ECE processes. Using this method a $100\;\mu{m}$ thick stainless steel (AISI 304) shadow mask for inverter can be fabricated with the channel length of $30\;\mu{m}\;and\;10\;\mu{m}\;respectively.\;The\;width\;of\;connection line\;is\;150\;\mu{m}$. The aspect ratio of the wall is about 5 and 15, respectively. Metal lines and source-drain electrodes of OTFTs were successfully deposited through the fabricated shadow mask.