• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.67-80
• /
• 2005

In this paper, the primary objective of the research are to review the methods currently avaliable for estimating the delay incurred by vehicles at signalized intersections. The paper compares the delay estimates from a deterministic queueing model, a model based on shock wave theory , the steady-state Webster model, the queue-based models defined in the 1994 and 2001 version of the High way Capacity Manual, in addition to the delays estimated from the TRANSYT-7F macroscopic simulation and NETSIM microscopic simulation. More especially, this paper is to compare the delay estimates obtained using macroscopic and microscopic simulation tools against state-of-the practice analytical models that are derived from deterministic queueing and shock wave analysis theory. The results of the comparisons indicate that all delay models produce relatively similar results for signalized intersections with low traffic demand, but that increasing differences occur as the traffic demand approaches saturation. In particular, when the TRANSYT-7F and NETSIM are compared, it is highly differences as approach for traffic condition to over-saturation. Also, the NETSIM microscopic simulation is the lowest estimates among the various models.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.06a
• /
• pp.167-168
• /
• 2014

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.193-195
• /
• 2010

• 한국도로학회:학술대회논문집
• /
• 2011.03a
• /
• pp.105-115
• /
• 2011

• 한국ITS학회:학술대회논문집
• /
• 2004.11a
• /
• pp.69-74
• /
• 2004

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.1-14
• /
• 2011

The surrogate safety assessment model which was developed based on the conflict theory by FHWA in the US is software to analyze traffic conflicts using the individual vehicle trajectory data from a microscopic traffic simulation model. This study aims at assessing the safety of different signal control strategies, including pre-time and actuated signal control, using the SSAM. To this end, this study effort has developed a microscopic traffic simulation model using VISSIM through a field study, and then produced the surrogate measures, including TTC, PET, DR, MaxS and DeltaS, and the numbers of conflicts, including rear-end, right angle and lane-changing conflicts. The assessment results indicated that the actuated signal control may produce more conflicts in terms of rear-end conflicts. The use of SSAM in the safety assessments for diverse traffic alternatives in a safe and fast way may contribute to the improvement of safety in the roadway transportation.

• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2016

This paper introduces 'EgresSIM', which is microscopic evacuation simulation software. EgresSIM developed in this paper is a three-dimensional (3D) pedestrian evacuation simulator based on the improved model advanced from the floor field model(FFM), a microscopic pedestrian model. This software can simulate large size buildings that consist of a number of floors, stairs, rooms, and exit doors. Moreover, this software can arrange several hundreds or thousands of pedestrians in indoor space and check their movements through the 3D viewer in real time, as well as produce detailed results about evacuation situations such as which paths are employed by individual pedestrians, how long does it takes to evacuate, and how many evacuees are gathered at each of the exit doors. Building data needed in the simulation are constructed as XML files according to pre-defined indoor data models and information of simulation results is also created as XML log files. A moving pattern of pedestrians can be represented in many ways by adjusting the sensitivity parameters of two walk models supported by EgresSIM. Thus, evacuation simulation can be done based on many assumptions of situations such as movement to the nearest exit door or blackout after outage.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.110-114
• /
• 1999

본 연구는 Zeigler가 제안한 이산 사건 시스템 형식론(DEVS: Discrete Event System Specification)을 이용한 거시적 및 미시적 교통류 시뮬레이션 방법론의 개발을 주 목적으로 한다. 도로 교통망의 모델링 방법은 미시적(microscopic)방법과 거시적(macroscopic)방법으로 분류된다. 이러한 모델링 방법들은 그 목적에 따라 각기 표현되어 제각기 사용되어 왔으나, 시스템 이론적으로 이들은 독립적 모델이 아니며 오히려 이들은 서로 동질적 추상화 관계에 있어서, 통합 모델링 환경의 구축시 미시적 모델들로부터 추상화에 의한 거시적 모델의 자동생성 등 설계상의 효율뿐 아니라 모델간의 일관성을 통한 모델 유효성을 보장할 수 있는 장점이 제공될 수 있다. 따라서, 본 논문에서는 서로 다른 표현 방법(즉, 이산시간 형식론과 이산사건 형식론)간의 통합 표현을 기반으로 양자간의 추상화 관계를 도출하고, 이를 이용한 모델 추상화를 통해 거시적 및 미시적 교통류 시뮬레이션 방법론을 제안한다. 시스템 이론적 접근을 토대로 접근한 통합 교통류 시뮬레이션 환경은 미국 Berkeley 대학 교통 연구소에서 개발한 SHIFT 등과 같은 최첨단 교통류 시뮬레이션 도구에 비하여 SES/MB를 기반을 시스템 이론적이며 소프트웨어공학적인 접근을 통하여, 1) 기존 제어 방식의 검증 및 신뢰도 분석, 2) 각종 사건, 사고의 시간별 파급효과 분석, 3) 도로건설 계획안에 대한 타당성 검토, 4) 운전자 및 관리자를 위한 예측된 교통정보 등을 제공할 수 있을 것으로 기대된다.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.185-203
• /
• 1995

The purpose of this paper is to develop a microscopic traffic simulation model which is able to both analyze and the evaluate signlaized urban network and to verify its usefulness in comparison with the other model which has alfeady been released. This simulation model adopts the General Motor's 5th model for car-following and introduces an unique lanechanging rule using acceptable gap. It analyzes single and dual-ring signal phases and generates detector information . So it could be applied to dynamic route guidance systems as wel as real time signal control systems. The results derived from Netsim and the observed data from the real network have been used to test the validit of the proposed model. The result of the test has shown that there are no significant differences between the NETSIM model and the proposed model in estimating travel speed and stopped delay. In optimum offset estimatin , it has shown the same results with NETSIM. the measure of effectiveness , however, derived from this model is slightly better than that of the real network situation. This may be due to the fact that the proposed model does not take into account side frictions from interferences and obstacles.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.53-66
• /
• 2005

Microscopic simulation models, which focus on individual vehicles, are used extensively in the transportation operations in order to capture vehicle to vehicle and vehicle to traffic controls. There are many important factors involved when a micro simulation model is applied as an evaluation tool for the traffic system. They typically include test bed, software, simulation time period, measure of effectiveness, parameter for a software, OD matrix, and random seed number. To evaluate the effects of those factors, sensitivity analysis was performed to identify the effects of those factors based on CORSIM and TRANSIMS results. Three freeway corridors, two in Houston (I-10 and US 290) and one in Sin Antonio (I-37), were chosen as test beds. Three time periods (AM, PM, off-peak) and three OD matrix estimates were used for the analysis. It was found that the micro-simulation results were highly sensitive to the model Parameter sets and the OD information. The degree of sensitivity was a function of the test bed and time period.