• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.116-120
• /
• 2004

In this paper, we proposed a method to shift the resonant frequency by applying the electric field to microstrip patch antenna using piezoelectric substrates. We fabricated microstrip patch antenna using Y-cut LiNbO3, Quartz and FR-4 substrates. We designed and simulated the microstrip antennas by Ensemble V 7.0 of the simulation too1. We observed the resonant frequency by DC applied electric field in a microstrip patch antenna. When the electric field was 300 V/mm, the resonant frequency agile of Y-cut LiNbO3 microstrip patch antennas were 29 MHz. When the electric field was 400 V/mm, the frequency agile of X-cut, Y-cut and Z-cut quartz microstrip patch antennas were 55.2 MHz, 34.2 MHz and 28.0 MHz, respectively. However, when the electric field was 400 V/mm, the resonant frequency of FR-4 microstrip patch antenna does not changed. It was shown that the resonant frequency agile of Y-cut and Z-cut quartz microstrip patch antennas are due to piezoelectric phenomenon not to be permittivity.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.715-718
• /
• 2002

TX/RX dual microstrip 1$\times$8 sub-array antennas are designed, fabricated, and measured for a wideband array antennas in communications. They have a Right Handed Circular Polarization (RHCP) for TX from 7.9 to 8.4 GHz and Left Handed Circular Polarization (LHCP) for RX from 7.25 to 7.75 GHz. Two stacked patches are used for a wideband characteristics and cornertruncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 1$\times$2 sequential rotation arrays are applied. From the measured results, 1$\times$8 microstrip sub-array antennas have a good agreement with those of the simulation. Therefore the sub-array antennas are applicable to satellite communication antennas, active phased array antennas, and radiators in other antennas.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.282-287
• /
• 2003

″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1250-1256
• /
• 2017

This paper proposes the design of microstrip patch antennas for dual-band polarization adjustment. The antenna has a multi-layer structure for dual-band operation, and each layer contains a resonating patch with surrounding strips separated into two parts. The antenna polarization is adjusted by varying the separated positions of the strips, while fixing other design parameters. To demonstrate the feasibility, an antenna sample with right-hand circular polarization is fabricated, and its antenna characteristics are measured in a full anechoic chamber. The operating principle of polarization adjustment in the dual frequency bands is also verified by observing near electromagnetic fields and the magnetic surface current density around the antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1299-1305
• /
• 2002

Tx/Rx dual microstrip array antennas for satellite communications are designed, fabricated, and measured in this paper. They have a Right Handed Circular Polarization (RHCP) for Tx and Left Handed Circular Polarization (LHCP) for Rx. Two stacked patches are used for wideband characteristics and corner-truncated square patches are adopted for a circular polarization. To enhance bandwidth characteristics of a circular polarization, 2${\times}$1 sequential rotation mays are applied. From the measured results, 8${\times}$1 microstrip may antennas have a good agreement with those of the simulation. Therefore the array antennas are applicable to satellite communication antennas, active phased may antennas, and radiators in other antennas.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1846-1848
• /
• 1999

A technique is investigated for achieving broadband properties by controlling the operation frequency of microstrip antennas. The control is achieved by applying DC and AC bias to the microstrip antenna. Air gap antenna with pzt post and microstrip antenna with simple rectangular patch on the $LiNbO_3$ substrate were fabricated. In the case of Air gap antenna, the variation of operating frequency was 11Mhz and $LiNbO_3$ antennas was 11Mhz. Also, frequency scanning was achieved by appling AC bias.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.2
• /
• pp.18-25
• /
• 1994

In this papaer, the input impedance of the rectangular microstrip patch antennas with the multilayered structure is analysed by using the moment method technique in the spectral domain. The analysis is carried out for two different feeding structures : directfeeding structure and electromagnetic-feeding structure. In order to obtain the accurate input impedance, the current distribution on the microstrip feed line is modeled by the quasi-TEM travelling wave and the PWS(piecewise sinusoidal) mode. The input impedances of the designed microstrip antennas are measured and compared with the calculation. which shows a good agreement.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.70-78
• /
• 2000

In applying high-${\underline{T_c}}$ superconducting material to microwave devices, Uncertainty of electromagnetics of high-${\underline{T_c}}$ superconductor(HTS) and the temperature dependence of the substrate fits with HTS thin film cause difficulty in realization of such antenna for industrial applications. It must be noted to characteristic the HTS antenna in contrast with normal conducting counterpart for this real application. In this paper, a comparative study between HTS microstrip antennas and gold antennas was reported in terms of the return loss, the characteristic impedance, efficiency, and other various characteristics. HTS thin films were $YBa_2Cu_3O_{7-x}$ (YBCO) on MgO substrates. Superconducting microstrip antennas used in this work were to directly inset a microstrip transmission line into the 50 ${\Omega}$ region of the radiating patch. Measurement results of HTS antennas and gold antennas showed that usable antennas can be made using this architecture.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.6
• /
• pp.26-34
• /
• 2010

The mutual coupling of a pair of microstrip patch antennas on a finite grounded dielectric substrate is influenced by the diffracted field of surface waves from the edges of a substrate. The effective dielectric constant of a grounded dielectric substrate determines the distance between the antenna center and the edge of a substrate to obtain the minimum mutual coupling between a pair of microstrip patch antennas. The optimum substrate size with the minimum mutual coupling is easily calculated using the image method. The optimum substrate sizes using the linage method are in good agreement with the results obtained by the full wave simulation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.3
• /
• pp.180-185
• /
• 2005

Microstrip antennas generally have a lot of advantages that are thin profile, lightweight, low cost, and conformability to a shaped surface application with integrated circuitry. In addition to military applications, they have become attractive candidates in a variety of commercial applications such as mobile satellite communications, the direct broadcast system (DBS), global positioning system (GPS), and remote sensing. Recently, many of the researches have been achieved for improving the impedance bandwidth of microstrip antennas. The basic form of the microstrip antenna, consisting of a conducting patch printed on a grounded substrate, has an impedance bandwidth of $1\~2\%$. For improvement of narrow bandwidth of microstrip patch, we were designed U-slot microstrip patch antenna in this paper. This antenna had wide bandwidth for all personal communication services (PCS) and IMT-2000. For the design of U-slot microstrip patch antenna using a finite difference time domain(FDTD) method. This numerical method could get the frequency property of U-slot patch antenna and the electromagnetic fields of slots.