• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.68-76
• /
• 2007

The purpose of this study is to investigate change of mechanical and physical properties, shape behavior and hand value in weft knit when rib stitch and milan stitch are combined. The knit stitches used in this study are plain stitch, half milan rib stitch, milan rib stitch, $2{\times}1$ rib stitch, $2{\times}1$ half milan rib stitch and $2{\times}1$ milan rib stitch. We analyzed physical and mechanical properties(tensile, bending, shear, compression, surface properties, thickness and weight) of the knit stitches and calculated their primary hand value and total hand value through translational formulas using the KES(Kawabata Evaluation System). The results are as follows; In evaluation of mechanical properties and hand values of knit stitches, plain stitch had the highest flexibility and the lowest T.H.V. as women's winter knit wear. Since $2{\times}1$ rib stitch had too high elongation in one direction, although it had the highest T.H.V, it needs to be careful when plain stitch and $2{\times}1$ rib stitch are applied for women's winter knit wear. Since Milan rib stitch and $2{\times}1$ milan rib stitch had high T.H.V. similarly, it is considered that they are suitable for women's winter knit wear. Specially, when Milan stitch is combined with $2{\times}1$ rib stitch, its shape stability and fullness are contained and flexibility is added on it. Therefore, $2{\times}1$ milan rib stitch can be also applied for women's winter knit wear.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.77-83
• /
• 2012

Zoonoses represent a public health risk recently pointed out by the spreading of previously unknown human infectious diseases emerging from animal reservoirs such as severe acute respiratory syndrome and avian influenza caused by H5N1-virus. These outbreaks have shown that animal breeding activities can pose a significant public health risk. Until now, the risk of zoonoses has probably been underestimated, particularly in occupational settings. The emergence or re-emergence of bacterial (Mycobacterium bovis and Brucella spp) or viral (hepatitis E virus) infections shows that zoonoses should be considered as emerging risks in agricultural and animal breeding and should be addressed by specific preventive interventions. Close cooperation and interaction between veterinarians, occupational health physicians and public health operators is necessary, for a worldwide strategy to expand interdisciplinary collaborations and communications in all aspects of health care for humans, animals and the environment. This is what the One Health Approach was intended to be.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.16.1-16.5
• /
• 2018

Background: Proliferative verrucous leukoplakia (PVL) is an oral potentially malignant disorder, characterized by multifocal expression, progressive clinical evolution, and a high rate of malignant transformation. Evidence-based information regarding optimal PVL management is lacking, due to the paucity of data. The present report describes a case of PVL associated with HPV-16 infection and epithelial dysplasia treated by diode laser surgery, and the outcome of disease clinical remission over a 2-year follow-up period. Case report: A 61-year-old Caucasian male with oral verrucous hyperkeratosis presented for diagnosis. The lesions were localized on the maxillary gingiva and palatal alveolar ridge. Multiple biopsy specimens have been taken by mapping the keratotic lesion area. Microscopic examination was compatible with a diagnosis of PVL with focal mild dysplasia, localized in the right maxillary gingiva. Polymerase chain reaction (PCR) was done for human papillomavirus (HPV) detection which revealed presence of HPV DNA, and the genotype revealed HPV 16 in the sample. The PVL in the right gingival area was treated on an outpatient basis by excision with a diode laser. This approach resulted in good clinical response and decreased morbidity over a 2-year follow-up period. Conclusions: This case illustrates the benefit of a conservative approach by diode laser treatment than wide surgical excision for management of the PVL lesions associated with mild dysplasia and HPV-16 infection.

• Journal of the Korean Society of Costume
• /
• v.60 no.2
• /
• pp.144-158
• /
• 2010

The concept and the typical characteristics of ethnic fashion were studied. 267 fashion designs from pret-$\grave{a}$-porter collections in Milan and New York from 2001 S/S to 2005 F/W were analyzed. The major conclusions of the study are as the following: The major types of ethnic fashion are Africa, American Indian, Japan, India, China, and Inca. Among these types, the first volume is Africa, the second is American Indian and others are Japan, India, China and Inca in order. Ethnic fashion changes in years showed reduction from 2001 to 2004, but much rise in 2005 showed more than 30% from 2001. Much more ethnic fashion designs were presented in S/S seasons than in F/W seasons. Africa ethnic fashion designs were more popular in S/S seasons. India ethnic fashion designs were more popular in F/W seasons. In the comparison of the Milan and New York collection, ethnic fashion designs appeared more in Milan collections than in New York from 2001 to 2003. But ethnic fashion designs appeared more in New York collections than in Milan in the year of 2005.

• Architectural research
• /
• v.14 no.4
• /
• pp.133-141
• /
• 2012

The research started from the consideration that, although many aspects of the Milanese Early Renaissance are well known today, thanks to a vast literature, only few studies, so far, have paid attention to the ordinary world of architectural work - and its obscure protagonists - of this area and this period. Moving from the belief that this topic is crucial for a complete understanding of the 15th century architectural world, characterized by a progressive overlapping of roles and responsibilities in the worksites, this study aims to provide a contribution to expand the understanding of this matter, by focusing on a particular aspect of it: the role of the public administration in the architectural activity. In particular, the paper analyzes the characteristics of the "Office of the engineers of the Municipality of Milan", one of the major public architectural institution of the Duchy of Milan in the 15th century. Through an extensive archival survey, conducted in the major archives of Milan and Lombardy, the research achieves two main findings: a) the reconstruction of the complete Office staff throughout the 15th century and, b) an outline of the role and identity of the Office and its officers, through the elaboration of data collected. In particular, professional roles, technical duties, cultural background and tasks of the officers, together with Office management, appointment procedures and salary conditions are highlighted. This research, not meant as an ultimate study on the topic discussed, is intended to provide some material and reference points for further researches that will aim to expand the understanding of this matter.

• Nuclear Engineering and Technology
• /
• v.41 no.10
• /
• pp.1293-1306
• /
• 2009

In this paper, an infinite impulse response locally recurrent neural network (IIR-LRNN) is employed for modelling the dynamics of the Lead Bismuth Eutectic eXperimental Accelerator Driven System (LBE-XADS). The network is trained by recursive back-propagation (RBP) and its ability in estimating transients is tested under various conditions. The results demonstrate the robustness of the locally recurrent scheme in the reconstruction of complex nonlinear dynamic relationships.

• Journal of the Korean Society of Costume
• /
• v.57 no.5 s.114
• /
• pp.1-11
• /
• 2007

The purpose of this study was to analyze and minimize structural error between sample knitting and actual knitting in weft knitting apparel. Basic stitches used in this study were plain stitch, $0{\times}0$ rib stitch, $1{\times}1$ rib stitch, $2{\times}2$ rib stitch, Milan rib stitch. They were knitted into two different gauges(7 and 12 gauge) and 6 different sample sizes by computer program. The weight, length and width of these 5 basic knitting stitches were measured and their changes according to gauge, stitch and knitting were calculated and analyzed. The results were as follows; The weight of $0{\times}0$ rib stitch was the largest, followed by Milan rib stitch, $2{\times}2$ rib stitch, plain stitch and $1{\times}1$ rib stitch. As the density of stitch per unit area increases, the weight increases. The length of $0{\times}0$ rib stitch was the largest, followed by plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch and Milan stitch in both 7 and 12 gauge. As the number of course increases, the length increases accordingly. However, its increase ratio shows higher than that of number of course. It means that the reduction in number of course is needed to get aimed length. The width of Milan rib stitch was the largest, followed by $0{\times}0$ rib stitch, plain stitch, $2{\times}2$ rib stitch, $1{\times}1$ rib stitch in 7 gauge. In 12 gauge, Milan stitch, plain stitch and $0{\times}0$ rib stitch were the highest, followed by $2{\times}2$ rib stitch and $1{\times}1$ rib stitch. It showed that the change in shape of stitch influenced on the width more than the length of stitch.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.35.1-35.6
• /
• 2020

Background: Miescher's cheilitis granulomatosa (MCG) is a rare chronic inflammatory disease and is known as the monosymptomatic clinical form of Melkersson-Rosenthal syndrome (MRS). It is characterised by swelling of one or both lips and more frequently affects the upper lip. Histopathological findings show the presence of numerous inflammatory infiltrates and granuloma formations. Pharmacological treatments and surgery have provided results that are positive yet insufficiently stable in the long term. The clinical case described is of a 68-year-old female patient with a diagnosis of MCG of the upper lip. Case presentation: The patient was diagnosed and treated at the Oral Medicine and Oral Pathology outpatient clinic of Maxillofacial and Odontostomatology Unit, Fondazione Cà Granda IRCCS Ospedale Maggiore Policlinico. The patient was recommended localised treatments of photobiomodulation (PBM) using a diode laser with a 635 nm and 980 nm dual-wavelength (λ) approach, a 600-micron fibre, and a handpiece with a 1-cm-diameter lens at 300 mW. Three treatments a week were administered for four weeks for a total of 12 treatment sessions (T₁-T₁₂). After that, the patient had a long follow-up period of about 2 years. The therapeutic results were clear from the initial stages of treatment. There was an immediate, gradual, and consistent reduction in labial swelling. A reduction in the size of the lip by about 35% at T₁₀-T₁₂ was observed, returning the size and volume of the upper lip within the normal clinical range. The painful symptoms subsided after the seventh treatment (T₇). The histopathological check at 3 months and the follow-up in particular confirmed the disease was in remission with satisfactorily stable treatment results. Moreover, the patient did not use any other treatments on the area from the early laser treatments through to the end of the follow-up period. Conclusions: Our experience describes a clinical case of MCG treated with PBM and effectively resolved with a reduction of the lip swelling. The real success of the treatment emerged over time, showing that the tissue healing was stable. In absence of any collateral phenomena, this confirms the effective and documented therapeutic potential of PBM for chronic inflammatory infiltrates.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.2.1-2.9
• /
• 2016

Background: We reviewed the biological and mechanical properties of porous hydroxyapatite (HA) compared to other synthetic materials. Computer-aided design/computer-aided manufacturing (CAD/CAM) was also evaluated to estimate its efficacy with clinical and radiological assessments. Method: A systematic search of the electronic literature database of the National Library of Medicine (PubMed-MEDLINE) was performed for articles published in English between January 1985 and September 2013. The inclusion criteria were (1) histological evaluation of the biocompatibility and osteoconductivity of porous HA in vivo and in vitro, (2) evaluation of the mechanical properties of HA in relation to its porosity, (3) comparison of the biological and mechanical properties between several biomaterials, and (4) clinical and radiological evaluation of the precision of CAD/CAM techniques. Results: HA had excellent osteoconductivity and biocompatibility in vitro and in vivo compared to other biomaterials. HA grafts are suitable for milling and finishing, depending on the design. In computed tomography, porous HA is a more resorbable and more osteoconductive material than dense HA; however, its strength decreases exponentially with an increase in porosity. Conclusions: Mechanical tests showed that HA scaffolds with pore diameters ranging from 400 to $1200{\mu}m$ had compressive moduli and strength within the range of the human craniofacial trabecular bone. In conclusion, using CAD/CAM techniques for preparing HA scaffolds may increase graft stability and reduce surgical operating time.

• Korean Institute of Interior Design Journal
• /
• v.13 no.1
• /
• pp.11-19
• /
• 2004

Today the globalization has already penetrated into the education field. It accelerates the exchange and the sharing of the education systems over the world. In that situation, the education systems of USA or Japan were often introduced into our country, while those of Europe haven't been well introduced, less in the field of interior design education systems of Italy. Furthermore, it is necessary to examine objectively the present situations, because the education systems are usually easy to change according to the times. This research is wholly directed by my own experiences such as teaching and studying at Milan, Italy for the past four years. Also the research was continuously done with the data gathering after returning to my country. The detailed situations and characteristics of Politecnico di Milano would be compared to those of other interior design schools at Milan, Italy. I hope it will be an useful data for not only the professors and instructors but also the students who want to study in Italy.