• 제목/요약/키워드: Modification

검색결과 8,997건 처리시간 0.041초

유비퀴틴화에 의한 세포 내 p53의 기능 조절 (Regulation of cellular functions of p53 by ubiquitination)

  • 정진혁;이준영;이선미;최태부;안성관
    • KSBB Journal
    • /
    • 제24권3호
    • /
    • pp.217-226
    • /
    • 2009
  • p53은 전사인자로서 세포의 사멸이나 세포주기 조절 등 다양한 세포 활성을 보이기 때문에 일반적인 환경에서는 매우 낮은 수준으로 단백질 양이 확인된다. p53의 단백질 양과 활성은 다양한 세포 내 신호에 의하여 이루어지는 후전사 변형을 통하여 조절 받는다. 이중 유비퀴틴화는 세포 내에서 p53 단백질의 발현 수준이 낮게 유지되는 것이 가능하게 하는 대표적인 기전이다. 이러한 기전을 일으키는 대표적인 p53의 E3 ligase로는 mdm2, Pirh2, COP1, ARF-BP1 등이 보고되어 있으며, 각각 negative feedback loop나 다른 기전을 통하여 p53 단백질의 분해를 유도하여 세포의 항상성을 조절한다. 이 밖에도 p53은 mdm2나 WWP1, UBC13, MSL2와 같은 E3 ligase로 인해서 모노 유비퀴틴화 되고, p53의 세포 내 위치가 조절되어 전사인자로서의 활성이 억제된다. p53의 세포 내 위치와는 관계없이 p53의 전사인자로써의 활성 또한 아세틸화와 유비퀴틴화의 경쟁적 반응으로 인해 조절 될 수 있다. E4F1에 의한 유비퀴틴화는 세포주기와 관련된 유전자의 발현을 증가시키되 세포사멸 관련 유전자의 발현은 감소시키는 것으로 보아 p53의 수많은 downstream gene의 발현 또한 유비퀴틴화를 통해 조절 될 수 있음이 제시되었다. 앞으로의 연구는 신규 E3 ligase에 의한 p53의 유비퀴틴화 기전 연구 뿐 아니라 이와 관련된 다른 변형과의 관계에 대한 연구 또한 매우 중요하게 부각되어 질 것으로 예상된다.

표면처리 활성탄소섬유에 의한 U(VI)의 전기흡착 (Electrosorption of U(VI) by Surface-Modified Activated Carbon Fiber)

  • 이유리;정종헌;유승곤;오원진
    • Korean Chemical Engineering Research
    • /
    • 제43권1호
    • /
    • pp.60-65
    • /
    • 2005
  • 연속적 전기흡착 셀에서 활성탄소섬유 부직포 전극을 사용하여 U(VI) 함유 폐액을 처리하였다. 더 낮은 전위에서 U(VI)의 전기흡착 효율을 높이기 위하여 ACFs를 화학약품으로 표면처리하고 그의 세공구조 및 관능기의 변화를 조사하였으며 처리조건이 U(VI)의 흡착에 미치는 영향을 고찰하였다. 표면처리한 모든 ACFs의 비표면적은 감소하였다. 중성염 및 염기성 용액으로 처리한 ACFs의 산성관능기는 감소했지만 산성 용액으로 처리한 ACFs의 산성관능기는 증가하였다. 산성관능기는 U(VI)의 흡착을 차단하여 산성용액 처리 ACFs 전극은 처리하지 않은 ACFs 전극에 비하여 U(VI)의 흡착용량이 감소했다. 중성염과 염기성 용액으로 처리한 ACFs 전극은 흡착용량이 크게 증가하여 -0.3 V의 낮은 전위에서도 처리하지 않은 ACFs 전극의 -0.9 V에 상응하는 결과를 얻었다. 이러한 결과는 ACFs 표면의 산성관능기 감소에 의한 이온의 차단효과(Shielding effect)가 줄어들 뿐만 아니라 음전위 가용에 의한 전기이중층 내에서의 $OH^-$의 증가로 U(VI) 흡착이 효율적으로 진행되었기 때문이다.

Structure and Properties of Syndiotactic Polystyrene Fibers Prepared in High-speed Melt Spinning Process

  • Hada Yoshiaki;Shikuma Haruo;Ito Hiroshi;Kikutani Takeshi
    • Fibers and Polymers
    • /
    • 제6권1호
    • /
    • pp.19-27
    • /
    • 2005
  • High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

석회노분과 석회로 처리된 세립토의 단기적 역학특성 비교 (Comparison of Short-term Mechanical Characteristics of Fine-grained Soils Treated with Lime Kiln Dust and Lime)

  • 김대현;사공명;이용희
    • 한국지반공학회논문집
    • /
    • 제20권3호
    • /
    • pp.75-83
    • /
    • 2004
  • 인디아나주 도로국 (INDOT, Indiana Department of Transportation)에서는 부분적으로 1990년대 초반부터 토사개량(지반 안정화는 아님)에 대한 저비용의 건설재료로서 석회노분을 사용해왔다. 그러나 석회노분을 포함한 흙의 강도향상은 설계과정에서 노상의 안정화계산에 반영되지 않았다. 따라서 본 연구는 석회노분이 수화된 석회와 유사한 공학적 성질을 지닌 재료인지를 평가하기 위하여 수행되었으며, 인디아나주에서 흔히 접할수 있는 A-4, A-6, A-7-6와 같이 세립분이 우세한 다양한 흙과 조합하여 석회노분의 역학적 장점들을 평가하기 위해 일련의 실내실험들을 수행하였다. 본 연구에서는 아터버그한계, 표준다짐, 일축압축, CBR, 체적 안정성과 회복탄성계수등의 실험들을 수행하였으며 그 결과 비처리토에 비해 처리토의 경우 60-400% 정도의 범위로 일축압축강도가 증가하였다. 비혼합토에 대한 CBR 값의 범위가 3-18인 것에 반하여, 혼합토에 대한 CBR 값들은25-70의 범위내에 있다. 또한, 일반적으로 혼합토의 회복탄성계수도 상당히 증가하는 것으로 관찰되었다. 이상의 결과는 석회노분은 수화된 석회에 대한 대안으로서 실용적이고 경제적인 재료이며 세립토의 강도를 향상시키며 작업성을 향상시킬 수 있음을 암시한다.

티타늄의 표면처리 방법에 따른 저온소성도재와의 결합강도 (EFFECT OF SURFACE MODIFICATION ON BOND STRENGTH IN TITANIUM-PORCELAIN SYSTEM)

  • 로성욱;방몽숙;양홍서;박상원;박하옥;임현필
    • 대한치과보철학회지
    • /
    • 제45권5호
    • /
    • pp.589-600
    • /
    • 2007
  • Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.

해결자.청취자 문제해결 활동에서의 소집단 과정 (Small Group Processes in Paired Think-Aloud Problem Solving)

  • 전경문;노태희
    • 한국과학교육학회지
    • /
    • 제22권3호
    • /
    • pp.411-421
    • /
    • 2002
  • 해결자 청취자 활동에서의 소집단 문제해결 과정을 조사하였다. 고등학교 화학 수업 시간에 두 학급을 선정하여 문제해결 전략을 사용하여 해결자 청취자 활동을 하는 집단(St-SL)과 전략을 사용하지 않는 집단(SL)으로 무선 배치한 후, 소집단 활동 과정을 녹화/녹음하였다. 해결자와 청취자의 언어적 행동을 4단계 문제해결 단계에 따라 분석하고, 각 단계별 수행 수준을 조사하였다. 이해 단계에서는 St-SL 집단의 해결자가 문제의 조건이나 구해야 할 것을 파악하는 과정에 대해, 청취자가 단순히 동의하는 행동이 많이 나타났다. 계획 단계 중 관련된 법칙 회상에 대해서는 St-SL 집단의 청취자가 질문, 지적하고 이를 토대로 해결자가 수정하는 행동이 많이 나타났는데, 이러한 언어적 상호작용이 학생들이 올바른 법칙을 사용하여 물리량을 유도해내는 데에 긍정적인 영향을 준 것으로 파악된다. SL 집단과 St-SL 집단 모두 하위 목표를 설정하는 것에 관한 언어적 상호작용은 별로 나타나지 않았고, 이를 제대로 수행한 경우도 별로 없었다. 검토 단계에서 SL 집단의 경우 상호작용이 전혀 나타나지 않았고, St-SL 집단에서는 해결자가 청취자의 동의를 구하는 행동이 많이 나타났다. 그러나 이러한 상호작용을 통해서도 답의 의미를 분자 수준에서 설명하는 전략에 대해서 바르게 수행하는 경우는 거의 없었다. 인식 검사에서는 학생들이 문제해결에 가장 많은 도움을 준 단계는 이해 단계이고, 계획이나 검토 단계는 적용하기 어려운 것으로 응답하였다.

중증도 분류체계를 이용한 중증도분류(Triage) (Severity of Emergency Patient classified by Triage System)

  • 배정희;손수경
    • 한국간호교육학회지
    • /
    • 제7권2호
    • /
    • pp.264-274
    • /
    • 2001
  • About the patients who visited the emergency department of a hospital, investigative study was performed to assess and to classify them with triage tool, and to estimate the characteristics of them. 210 patients older than 15 years were investigated. Among them 11 patients who had responded inappropriately were excluded and remaining 210 patients were chosen as study subjects. Investigation had been performed for 30 days from Jan. 10, 2001 to Feb. 9, 2001. The triage tool was designed through the modification of triage tools developed by Kim and Choi. The data were analyzed with the SPSS program using mean, standard deviation, frequency, percentage, ANOVA and Scheffe's test. The results were as follows: 1. Of the characteristics of the study subjects, mean age of patients were 55.76 years and 70-79 years group which included 41 patients(20.6%) were most numerous. 101 (51.8%) patients visited emergency room by 119 emergency service and 91(45.7%) patients walked with assistance. 127 patients were cared in internal medicine department. 2. The distribution of triage scores were from minimum 6 points to maximum 18 points with mean $13.76{\pm}2.58$ points. 3. Triage scores had significant relationship with age(F=13.349,P=0.000), visiting method (F=8.832, P=0.000), walking status(F=28.185, p=0.000), care department(F=2.596, P=0.019), and preexisting disease(F=12.012, P=0.000). 4. After trage there were no urgent patient, 35 emergent patients(17.6%),109 subemergent patients(54.8%), and 55 nonemergent patients (27.6%). The result of emergency care were 80 admission(40.2%), 59 discharge (29.6%), 34 ICU admission(17.1%), 14 transfer to other hospital(7%), 10 operation (5%), and 2 death (2%). 5. About the time required for triage, mean duration to triage were $7.54{\pm}2.28$ mins in emergent patients, mean $7.23{\pm}2.50$ mins in subemergent patients and mean $6.49{\pm}2.19$ mins in nonemergent patients. There were no differences in duration to triage according to the severity of triage. 6. Time required in emergency treatment were mean $116.23{\pm}88.10$ in emergent patients mean $101.61{\pm}73.27$ in subemergent patients and mean $81.56{\pm}61.01$ in nonemergent patients. There were no significant difference among groups. This study depicted that triage scores were below the middle level and there were many geriatric patients in this hospital. Among the characteristics of patients, age, visiting method, walking status, care department, and accompanying disease could be data for triage of emergency patients. With triage score of a patient, the outcome of emergency care of a patient could be anticipated and this could be basal data in determining the priority of emergency nursing.

  • PDF

상관결과의 왜곡 방지를 위한 재양자화 방법에 관한 연구 (A STUDY ON THE RE-QUANTIZATION METHOD FOR PREVENTING DISTORTION OF CORRELATION RESULT)

  • 염재환;오세진;노덕규;오충식;정진승;정동규
    • 천문학논총
    • /
    • 제27권5호
    • /
    • pp.419-429
    • /
    • 2012
  • In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

변조된 TiO2 광촉매를 이용한 벽지제조와 대기 중의 NO 제거 효과 (Preparation of Wall Paper Coated with Modified TiO2 and Their Photocatalytic Effects for Removal of NO in Air)

  • 권태리;류완호;이철우;이원묵
    • Korean Chemical Engineering Research
    • /
    • 제43권1호
    • /
    • pp.1-8
    • /
    • 2005
  • 본 연구에서는 광촉매의 광자효율을 증가시키고, 물성을 변화시켜 광촉매 성능을 향상시키기 위하여, 자동차 폐 촉매에서 추출된 귀금속 용액 또는 $H_2PtCl_6$ 용액을 수열합성법에 의해 제조된 $TiO_2$와 상업용 $TiO_2$인 P-25(Degussa Co.)를 함침시켜 변조된 광촉매를 제조하였다. 그리고 변조된 광촉매는 ICP-AES, EDS, UV-DRS, XRD, XANES, SEM에 이용하여 물성분석 하였다. 그리고 폐 자동차 촉매전환기의 추출용액을 함침시킨 광촉매를 변조하여 band-gap energy를 1.76eV(705 nm)의 가시광 영역까지 조절하였다. 변조된 광촉매는 PVC가 주성분인 벽지 코팅제와 농도별로 혼합하여 광화학반응을 위한 기능성 도료를 제조하였다. 이 도료를 사용하여 광촉매가 코팅된 기능성 벽지를 제조하였으며, 제조된 벽지의 광촉매 성능을 평가하였다. 반응모델 물질로 NO를 이용하여 촉매 조성, 반응물 농도, 벽지의 촉매 담지량, 반응시간에 따른 광 화학반응속도를 측정하였다. 그 결과 폐 자동차 촉매전환기의 추출용액으로 변조된 $TiO_2$의 광촉매 활성이 크게 증가하였음을 알 수 있었고 그 중에서도 P-25에 추출용액을 함침시킨 P-25(w)의 광촉매가 가장 우수한 광촉매활성도를 나타내었다.

다양한 기판 위에서 고분자 전해질 다층 막과 폴리에틸렌글리콜 미세 구조물을 이용한 세포 패터닝 방법 (Cell Patterning on Various Substrates Using Polyelectrolyte Multilayer and Microstructure of Poly(Ethylene Glycol))

  • 심현우;이지혜;최호석;이창수
    • Korean Chemical Engineering Research
    • /
    • 제46권6호
    • /
    • pp.1100-1106
    • /
    • 2008
  • 본 연구는 표면에 세포를 부착하는데 있어서, 다양한 기판 표면에 보편적인 플랫폼으로써 적용될 수 있는 세포 부착을 위한 기능성 표면의 제작 기술 및 이를 이용한 세포의 선택적인 고정과 편리한 세포 패터닝의 방법을 보여주었다. 세포 부착에 적합한 기능성 표면의 제작은 산소 플라즈마 처리를 이용한 다양한 기판의(유리, PMMA, PS, PDMS) 표면 활성화 및 상반되는 고분자 전해질의(PAH, PDAC, PSS, PAA) 정전기적 인력을 통한 증착으로 이루어진 다층의 고분자 전해질 층을 통해 제작될 수 있었다. 또한, 고분자 전해질로 증착된 표면 위로 마이크로 몰딩 인 케필러리 방법을 사용하여 PEG 마이크로 구조물을 제작함으로써 세포의 선택적인 고정이 이루어질 수 있었다. 다층의 고분자 전해질로 증착된 표면은 세포와의 강한 정전기적 인력으로 세포 부착에 유리한 표면을 제공하였다. 반면에, 제작된 PEG 마이크로 구조물은 물리적, 생물학적인 장애물의 역할로써 세포의 비 특이적인 흡착을 방지하였다. 세포 부착을 위한 기능성 표면을 제작하는 동안 표면의 특성은 접촉각 측정을 통해 이루어 졌다. 다양한 기판 상에서 개질된 표면은 세포 부착을 위한 적합한 환경의 제공과 함께 세포의 마이크로 패터닝 기술에서 높은 수율의 세포 패터닝을 제공한다. 상기의 제안된 세포 부착을 위한 기능성 표면 제작 기술 방법은 제작 과정이 매우 간단하고, 편리하여 손쉽게 구현이 가능하며, 제작 공정에서 어떠한 해로운 용매도 사용하지 않기 때문에 친환경적이다. 또한, 이를 이용하여 세포를 이용하는 바이오 칩 및 바이오 센서, 세포를 기반으로 하는 시스템 등에서 기본이 되는 기술로 사용될 수 있는 넓은 응용 범위를 갖는다.