• Journal of Korean Vacuum Science & Technology
• /
• 제6권2호
• /
• pp.55-57
• /
• 2002

Metal-vapor-vacuum-arc ion source is an ideal source for both high current metal ion implanter and high current plasma thin-film deposition systems. It uses the direct evaporation of metal from surface of cathode by vacuum arc to produce a very high flux of ion plasmas. The MEVVA ion source, the high-current metal-ion implanter and high-current magnetic-field-filtered plasma thin-film deposition systems developed in Beijing Normal University are introduced in this paper.

• 대한간호학회지
• /
• 제26권4호
• /
• pp.799-807
• /
• 1996

This study was done to compare the effects of managing obesity using a behavior modification program and an aerobic exercise in adolescent girls. Thirty three subjects were selected from one girls' middle school located in Seoul. Seventeen girls participated in the behavior modification program by joining 60-90 minute group sessions weekly. The aerobic exercise program was given to 16 girls three times per week for 60 minutes each. These iterventions continued for eight weeks from October 17 to December 10, 1995. The data were obtained before and after the interventions by measuring degree of obesity, body weight, blood pressure, serum lipid, %body fat, and waist to hip ratio(WHR). Data ware analysed by using paired t-test. The results are as follows. 1. Subjects in both the behavior modification and the aerobic exercise groups showed significant decrese in the degree of obesity, body weight, diastolic blood pressure, total cholesterol, low density lipoprotein, %body fat and fat mass after the 8-week interventions. 2. Systolic bood pressure, high density lipoprotein cholesterol and waist to hip ratio were significantly decreased after the 8-week intervention in the behavior modification program group while triglyceride was significantly decreased after the 8-week intervention in the aerobic exercise program group. These findings indicate that both behavior modification and aerobic exercise programs are good strategies for managing obesity among adolescent girls.

• 대한간호학회지
• /
• 제33권3호
• /
• pp.405-413
• /
• 2003

Purpose: This study was performed to investigate effects of behavior modification on obesity index, skinfold thickness, body fat, serum lipids, serum leptin in obese elementary school children. Method: Forty seven students were selected from two elementary schools. Twenty four children in one school were assigned to experimental group and twenty three children in another school were assigned to control group. Experimental group was received 60～70 minutes of behavior modification once a week for 8 weeks. Result: Obesity index of the experimental group was significantly decreased after behavior modification. But there was no significant difference between two groups. The increase of skin fold thickness was significantly low in the experimental group compared to the control group. Percentage of body fat and fat mass were significantly decreased in the experimental group. Fat free mass was significantly increased in the experimental group. HDL-C, triglyceride and serum leptin between the experimental group and control group showed no significant difference. Conclusion: These results indicate that behavior modification is effective in decreasing percentage of body fat and fat mass, in less increasing skinfold thickness and in increasing fat free mass. In conclusion, behavior modification can be used as effective strategy for managing obesity in elementary school children.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.199-205
• /
• 2000

The vibration and noise of gears is due to the vibration exciting force caused by the tooth stiffness which changes periodically as the mesh of teeth proceeds and by the transmission error, that is, the rotation delay between driving gear and driven gear caused by manufacturing error and alignment error in assembly and so on. The purpose of this study is to develop how to calculate simultaneously the optimum amounts of tooth profile modification, end relief and crowning by minimizing the vibration exciting force of helical gears. We estimate the vibration exciting force by the mesh analysis of gears. The constraints of this problem consist of contact ratio and strengths of gear teeth such as tooth fillet stress, surface durability and scoring. ADS(Automated Design Synthesis) is used as an optimization tool. And, since the aspect ratio is an important parameter of tooth modification, we investigate the relation between it and the optimum values of tooth modification. The proposed method can calculate the optimum amount of tooth modification automatically and is to be utilized to resolve the problem of vibration of helical gears.

• Clinical Nutrition Research
• /
• 제3권2호
• /
• pp.106-114
• /
• 2014

It is generally accepted that diet modification provides beneficial effects on the management of diabetes. In the present study, we evaluated the effects of diet modification on nutrient intake and quality of life in a large sample of diabetic patients. This study was conducted using data from the Korea National Health and Nutrition Examination Survey IV and V (2007-2010). A total of 2,484 of diabetic patients were included in the analysis. Then, we compared the overall quality of dietary intake between diabetic patients with diet modification and those without dietary modification. The result showed that subjects on diabetic diet (DDG) showed lower levels of total cholesterol, triglyceride, and AST before and after the adjustment for covariates (all p < 0.05). The results of nutrient assessment showed that DDG had lower intakes of total energy, fat, and carbohydrate (all p < 0.05), but higher intakes of energy from protein, vitamin B1, vitamin B2, niacin and vitamin C than NDG. (all p < 0.05). In addition, nutritional adequacy ratio of calcium and vitamin B2 were significantly higher in DDG than those in normal diet group (NDG) (p < 0.05). However, we observed no significant differences in quality of life between two groups. In conclusion, diet modification in diabetic patients seemed to be effective to improve blood lipid profile and the adequacy of nutrient intake without sacrificing the quality of life.

• 대한건축학회논문집:계획계
• /
• 제34권10호
• /
• pp.75-82
• /
• 2018

This study suggests the general support center with comprehensive services for the elderly. In general, the modifications of the elderly housing have a direct influence on the "Quality of life" and "Aging in place" for the elderly. But until now, the elderly housing modification has been carried out separately on the elderly welfare category. It is very inefficient and inconvenient for the elderly. Therefore, it is necessary to have a comprehensive organization that includes the implementation of modifications. To provide reasons for this insistence, this study analyzed the previous research, legal system guidelines, and others related things. And it researched the perception of the comprehensive institution and the need for housing modification through the recognition survey of the elderly and the early elderly. The study found that the current domestic legal system does not have an integrated system to carry out the entire process of applying and implementing the elderly housing modification. On the other hand, the results of the survey showed that the elderly hoped to introduce a comprehensive and user-friendly institution for housing modification.

• 디지털융복합연구
• /
• 제19권12호
• /
• pp.495-504
• /
• 2021

본 고찰은 가상현실 기반 가정환경 수정 프로그램들을 살펴봄으로써 향후 국내 가상현실 기반 가정환경 수정 프로그램 개발과 적용에 대한 기초자료를 제공하고자 한다. 문헌고찰을 위해 Medline, Embase, Scopus 등의 데이터 베이스와 수기검색을 이용하여 2011년 1월부터 2021년 6월 현재까지 가상현실을 이용한 가정환경 수정을 다루는 있는 학술연구, 컨퍼런스 및 심포지엄 속의 연구 등을 수집하였다. 선정기준을 통해 총 7편의 연구를 선정하였으며, 선정된 연구들은 가정환경 수정을 위한 가상현실 프로그램 프로토타입 개발 및 프로그램의 수용성 및 사용성 등에 대한 양적, 질적 연구들로 나타났다. 가상현실을 이용한 가정환경 수정 프로그램은 가정환경 수정에 관여하는 이해당사자들을 위해 다양한 목적으로 개발, 적용되고 있으며, 가정환경 수정 전문가 양성 및 이해당사자들을 위한 시뮬레이션 교육 프로그램과 원격 가정환경 평가, 수정 프로세스에 있어 클라이언트의 참여와 가정환경 수정에 관여하는 여러 이해당사자들과의 소통과 협업을 촉진시키는 도구로 사용될 수 있다. 향후 국내 주택의 특성을 반영한 가상현실 기반 가정환경 수정 프로그램 개발 및 실행가능성에 대한 연구가 이루어져야할 것이며 가정환경 수정 현장에서 프로세스를 지원하는 도구로서의 활용을 기대한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.161-166
• /
• 2002

The modification factor( k-factor) of equivalent damping ratio utilized in the current state-of-the-practice to account for the imperfection of reinforced concrete structures in hysteresis loop is investigated. From this, it is found that the current modification factor does not include the effect of cyclic loading, one of the important characteristic properties of earthquake loading. This could be taken into account by considering the energy absorption efficiency based on the cummulative plastic deformation. From the study, it is suggested that the current approach for the modification factor for the equivalent damping ratio should be reformed.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1026-1035
• /
• 1993

Further evaluation and modification were done on the new concepts plow (frontal plow), a plow which inverts the soil furrow without lateral displacement . First, kinematics of soil cutting section was analyzed and an experiment was conducted to report draft and power requirement. Second, function of main moldboards was examined and modification was made. As a result of the modification , force applied to the moldboard was reduced, but the furrow inversion became less stable.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1096-1101
• /
• 1992

In order tominimize fixing error of workpieces, circle, prismatic, sphere, cylindrical and sculptures types. Modification Rule by Indexing Table and Modification Rule by NC Program are developed for machining centers by using touch trigger probes. The Modification Rule by Indexing Table meas the alignment of workpiece to NC program through degree of freedoms of indexing table. The Modification Rule by NC Program is the alognment of NC program to workpiece ste-tp condition via the generation of NC progarm. A postprocessing module is alos developed for generating NC-part program(User Macro) to compensate for machining errors in end milling and boring processes. Developed method are verified by experiments.